I am unable to import raw images into elements 11 camera raw from my panasonic lumix 200

I am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have. The camera is a fairly recent model.

I'm new to all of this and didn't know to look further down the menu. I started browsing under help and found how to register the product which I hadn't done and have been thinking that was the root of the problem. Turns out with your suggestion to get me started I was right - I hope, haven't tested it yet. I had 6.4 It is still running.
Sent from my iPad

Similar Messages

I am unable to import Raw still images from a Nikon D 80 into Premiere Pro cs 4. All jpeg images ok

I am unable to Import RAW still Images from a Nikon D 80 camera into
Premiere Pro. All jpeg images import Ok. A web search suggests I need "plug-ins" for RAW, but I can not find same. Any suggestions as to how to inport RAW files to PP CS 4 would be appreciated. I have just updated from Premiere Elements 4 which had no problem importing RAW still images.
Roygo

The way I see it (correct me if I'm wrong) but Raw is supposed to be where you have total editing control of the shot (as opposed to the camera). I believe the next step is to do the editing (i.e. color balance, exposure, etc) then make a regular image from that to use in whatever output you desire (print, web, etc.) Think of raw as the negative. Just being in raw doesn't in it self make it better.
Edit. This is from premiere help files....
Supported still‑image and sequence file formats
Adobe Premiere Pro supports 8-bit per-channel (4 bytes per pixel) and 16-bit per-channel (8 bytes per pixel) still-image files. It converts images with lower bit-depths to 8-bits per channel and images with higher bit-depths to 16-bits per channel on import. High bit-depth files are supported at one single-precision float per channel (16-bytes per pixel).
AI, EPS (Adobe Illustrator and Illustrator sequence)
BMP, DIB, RLE (Bitmap and Bitmap sequence)
EPS
GIF
ICO (Icon File) (Windows only)
JPEG and JPEG sequence (JPE, JPG, JFIF)
PICT and PICT sequence (PIC, PCT)
PNG (Portable Network Graphics)
PSD (Adobe Photoshop and Photoshop sequence)
PSQ (Adobe Premiere 6 Storyboard)
PTL, PRTL (Adobe Premiere title)
TGA, ICB, VDA, VST (Targa and Targa sequence)
TIF (TIFF and TIFF sequence)

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
var doc = app.activeDocument;
var textFrame = app.selection[0];
var rectangles = textFrame.texts[0].rectangles;
if (rectangles.length > 0) {
for (var i=0; i < rectangles.length; i++) {
rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
However, there is a better approach:
Step 1
Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
Step 2
Import the xml file -- the placeholders are replaced with data from the 1st xml element
Step 3
Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
Hope this helps.
Kasyan

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Can't import any images into lightroom 5

Working away in my studio and suddenly I can't import any images into lightroom 5 (version5.5) for macbook pro os x 10.9.5

Thank you for your response,
...my complete goofiness.
I somehow managed to change my destination folder in Lightroom when importing images and could not copy to the "location" (or as the right panel indicates, the "destination").
So adjusted my destination folder and am back to importing as usual.
_Cindy

Imovie imports different image into project

I'm trying to create a slideshow using only jpg images. Sometimes (now frequently) when I drag a picture into the slideshow from iphoto, desktop, Adobe Bridge, or even straight out of downloads, the image that actually shows up in imovie is a previously used picture. Sometimes the correct image shows up in the strip, but a different photo shows up in the preview window.
I spent several hours at the Genius Bar yesterday and we dumped a plist and rebuilt the entire iphoto library.
I've got to say that after having imovie closed all night, I reopened it this morning and was able to import correct images into the correct positions on my project, but then it started acting up again (after I cancelled my Genius bar appointment for today!), and is again putting different pictures into the project than I am actually trying to put into the project.
I litterally just need to get about 5 more images into the project!
Please help
Using imovie 11 and OSx 10.7.5
Thanks in advance

I didn't film the video, so I'm not sure what kind of camera was used.
Here is a screenshot of the Quicktime Inspector:
And here is a bit more information about my situation: The video plays fine off of the thumb drive it was given to me on, and it plays fine off of my hard drive. But when I import the video into iMovie, all I see is the one still video shot while the audio plays beneath it. I've tried this on two different computers and on both of them, the video is frozen once it's imported into iMovie.
Bizarre.
I appreciate your help!

Unable to import certain image files in CS5

I currently am using CS5, and I am unable to import certain image files such as .png and.tga. When I try to import them I get an error message saying something along the lines of file type not supported. Any help?

Make sure that the images are not CMYK color space.
Already tried that, thanks
One thing to take note of is everytime I start AE I get a pop up box saying "You have at least one output module template that refers to a missing plug-in. Please check your Output Module Template". That plug-in would be the TIIFF alpha sequence output. Perhaps that has something to do with it..

When importing an image into Flash, the filesize is reported incorrectly

I saved an image from Photoshop using "Save for Web" and managed to bring the filesize down to 56.5kb. When I import this image into Flash and click on the properties, the reported "Original" filesize is 1884.6kb which is a heck of a lot more. How can I import the image and retain the filesize without having to compress the image further causing a horrible quality image?

right click one of your bitmaps, click properties and tick "allow smoothing". retest.

RH10 suddenly won't let me add/import new images into my project

I have tried accessing the "Insert Image" option using the various methods (menu, toolbar icon, right click menu), but once the dialog box is open, I click on the browse folder to find the image that I added via Explorer, but nothing happens and the app freezes. The only thing I am able to do is close RH via the Task Manager. I have tried rebooting and also tried doing this in multiple projects to make sure it's not my main project with the problem. This same thing happens every time.
I CAN add an image that has already been imported into the project... I tried doing that then using Image Properties to bring in the newly created image... same result... freezes the app. My project is only about 50MB in size... and I probably only have 2 or 3 dozen images in it so far.
I am hoping you are not going to say uninstall and re-install because I don't have the disc with me today... working from home.
Help please.

TOTAL weirdness... so I just got into work... turned on my laptop... so i'm not working remotely... opened my project... at first i got this error:
then i continued to get a series of errors of various kinds.. finally one telling me the cpd file was corrupt... now mind you... I had to restart RH several times yesterday... also did a reboot... and didn't get any of these errors...I also tried to import an image into an older project to see if it was the project or RH.. but i had the same problem with the other project - no.. didn't try a NEW project as I was planning at your suggestion because it's working in my existing project now.
so i deleted the cpd... opened the project.. and tried to import a new image.. and BAM.. it worked like always! WHAT'S UP WITH THAT?
I don't understand what the problem could have been if this wasn't working even without VPN...
Thoughts? I'd like to avoid this issue next time I'm working from home.. which will be next week!

Unable to import CD's into Itunes

I am unable to import CD's into Itunes. It won't rip into media player either. It recognizes the CD and starts to download and states it's imported but the information is unavailable. I have run diagnostics and re-installed Itunes. Does anybody have any suggestions?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Compaq-Presario KT526AA-ABA SR5505F
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0031AB8403F12DA8
Current user is not an administrator.
The current local date and time is 2012-07-09 09:21:15.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 6100 nForce 430 (Microsoft Corporation - WDDM)
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp CDDVDW TS-H653Q, Rev 0303
Audio CD in drive.
Found 4 songs on CD, playing time 29:10 on Audio CD.
Track 1, start time 00:02:15
Track 2, start time 07:01:29
Track 3, start time 14:12:65
Track 4, start time 21:10:57
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   4 8 16 24 32 40.
The drive CDRW speeds are:   4.
The drive DVDR speeds are:   4.
The drive DVDRW speeds are:   4.
Error Correction is turned on for importing audio CDs.

Import an image into a document

I see this asked on other posts but I don't see an answer so I'm going to ask again...
I'm using Designer 7.0, windows XP pro on a Dell D600 laptop with 1 gig of RAM.
I want to import an image into a docement and the image doesn't appear to be supported. I've tried jpg and tif. Some images will work and others won't. Is there a solution for this?
Thanks

Irv,
Thanks for the reply. The images that didn't work were CMYK. When I converted to RGB they worked.
The images that didn't work were coming up with random grey scale colors.
Thanks again,
Kurt

Unable to import raw photos

I am unable to import raw photos from my Nikon D5300. The thumbnails come up but are grayed out with "preview unavailable for this file" any suggestions? I can import jpg.
Thanks

Support for your camera model was added with the release of Lightroom 5.3.
What version are you currently running?
Tony Jay

Import Raster image into oracle database

I am trying to load raster image into oracle spatial 10g. It is a tiff file. I am using Oracle Mapbuilder that comes with oc4j.
I use Tools Menu -> Import Image to import that image into an oracle table.
But I get error -
java.lang.NoSuchMethodError: javax.media.jai.RenderedOp.getNumBands()I
i am using java 1.5 and i have set path to java media library - jai_codec.jar, jai_codec_depl.jar , jai_core.jar, jai_core_depl.jar
Pl help..
Thanks

ooee i solved it...
i used jre 1.6 and it works fine...

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

I am unable to import raw images into elements 11 camera raw from my panasonic lumix 200

Similar Messages

Maybe you are looking for