I am unable to install ios8 to an iphone with 8gb storage capacity

my wifes iphone 5c will not install ios8 even though she has deleted 95% of her storage usage????

Perform the update using iTunes on her computer.

Similar Messages

  • Unable to install new applications to iPhone with iTunes 8

    Hello,
    I am a Mac Newbie. My wife and I share a MacBook (10.5.5), we both have administrator accounts on the MacBook. We both have iPhones (2.1). I have downloaded numerous song and applications to my iPhone. My wife tried to download a few applications from the iTunes Store and received the following message, "Some of the applications in your iTunes library, including 'Wikipanion', were not installed on the iPhone '[Wife's name] iPhone' because you are not authorized for them on this computer." Does anyone know what is causing this error?
    Thanks
    Brian

    This is a common problem which I have not seen any reasonable response about from Apple. I have this problem. I suspect it may be related to the 2 phone thing. I have tried several posted fixes (reload phone from backup, remove apps and sync from itunes), but none permanently fix the problem.

  • Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

    Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
    I get the below error
    Could not find vsjitdebugger.exe
    Blogs say anti-virus is stopping but I dont have one on the system.
    Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
    Now i could not install both the software.
    Can I get some help regarding this?

    Hi Nandu,
    As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012.  If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
    in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
    Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
    To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
    http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
    1. You could execute the sfc /scannow command following steps below.
    a. Press "Windows+R", type in cmd and then right click "Run as administrator"
    b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
    c. Wait until the System File Checker finishes the check.
    2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
    3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
    4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
    In addition, if you are unable to install  Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup  . It is appropriate and more experts will assist you.
    Regards,
    Michelle Li

  • I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.

    Hi,
    I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.
    The "Staged" folder is present and remains after a restart, but the extensions do not get installed. They show in the extensions page with the "will be installed after you restart Firefox" message and remain like this no matter how many times I restart.
    Any Idea's?
    Running Firefox 24.0 on Windows 8.1
    Many Thanks,
    BD
    P.S. Just tried to install the "troubleshooter" add-on before posting the question and I got an error saying it cannot install because it cannot modify the needed file. (I did it manually instead)

    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
    If this hasn't helped then also delete the addons.sqlite file.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Unable to install KB2264107 on 2008 Server with SP2 X86 X64

    Hi All,
    Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
    I tried installing the  patch and iam getting This update does not apply to your computer
    Any troubleshooting steps for finding the fix for the same would really help me 
    Thanks In Advance !

    Hi All,
    Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
    I tried installing the  patch and iam getting This update does not apply to your computer
    Please let me know , this is really urgent 
    Thanks In Advance !
    maybe you already have a newer version of NTDLL.DLL installed?
    https://support.microsoft.com/en-us/kb/2264107
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Unable to instal Win 8 on iMac with Bootcamp & Win 7. Help please.

    Unable to install windows 8 on my imac with boot camp running Win 7. Instal gets reset to windows 7 with error message "unable to instal Win 8"

    V
    You need to go to the computer maker and get a copy of the OEM for your system.  YOu cannot download a non OEM and repair "it" with the OEM CD'S.  The cd's are probably for repair not install.  Does your system have a restore partition?
    Wanikiya and Dyami--Team Zigzag

  • HT1926 Unable to install iTunes update on pc with Windows 7 x64 bit

    Unable to install iTunes upgrade (11.0.1 on pc running Windows 7 x64 bit. Running old version of iTunes ok.  Have tried opening with new administrator but to no avail. Following download message that 'problems with installation'  and to tray manually.  Same outcome.
    Anybody got any ideas?
    Thanks
    Ian

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • How to install windows server 2008r2 on proliant microserver with 8gb storage?

    I've just purchased two HP Proliant N40 Microservers and am trying to install Windows 2008 Server R2 on them.  They come with a single hard drive of just 250GB capacity so on one server I have used the two supplied drives to create a RAID1 array of 250GB and Windows installed fine.
    On the second I have installed four WB Green 2TB drives and have configured them as RAID10 for the best performance and resilience. So I have a single disk showing to Windows of 4GB after the RAID array is built.
    But Windows gets so far before failing saying it can't proceed (and giving no clue as to why). Googling the issue it seems that there is an issue with installing Windows on a drive with > 2TB.  HP themselves talk about the use of RAID drivers for Windows here: http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=15351&prodSeriesId=4248009&lan... but the link is useless because the link it gives for downloading the driveres just displays a "Not authorised" screen.
    I just want a simple way to install Windows 2008 using a secure, performant reliable set of discs.  RAID10 gives me that but Windows won't install.  It seems my only option is to format two RAID1 arrays to overcome this silly limitation.
    Am I right?  Or is there a way to configure the four disks as a RAID10 array that Windows can be installed on?
    Thanks for any advice,
    Ian

    Update, install continues when drives are set to IDE...so it fails using RAID (1 or 10).

  • Installing apps on multiple iPhones with the same Apple-ID?

    I have noticed that it´s possible to login to App Store on any iPhone with my own Apple-ID, and this way install apps that I have purchased earlier on other iPhones than my own (registered to different Apple-ID´s), seemingly free of extra charge. I was just wondering if there are any limitations to this? Will I somehow be charged again if I install apps on my friends´ and familys´ iPhones using my Apple-ID? Or is there a limit to the number of other people´s iPhones that I can install apps on with my Apple-ID? How does it work?

    Hi edristiew,
    Are the photos that you are referring to still in Photo Stream? Remember, Photo Stream has limits which are outlined in this article:
    iCloud: Photo Stream limits
    http://support.apple.com/kb/HT4858
    If the photos are still stored in Photo Stream, this resource may answer your questions about how to extract them (Mac or PC):
    iCloud: Photo Stream FAQ
    http://support.apple.com/kb/HT4486
    If the photos are no longer in Photo Stream, but are in your camera roll, you can import them to your computer:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Cheers!
    Matt M.

  • After installing ios8 to my iphone 5 my phone won't come on?

    hi I installed the ios8 update on my iphone 5 and since doing so it will not come on.

    hold down the home/sleep button together until you see the apple logo and then release.

  • Unable to install Chrome on MacBookPro Retina, with 10.93/10.9.4

    I have had Chrome installed over many years and Operating systems.
    Something has happened and I am unable to update or install Chrome.  I have used all online instructions on how to remove all traces of Chrome from the Harddrive, used "AppZapper" etc, and have apparently no residue.
    I download the latest version of Chrome, but when i try to access ANTHING, I get the SadSack "Aw, Snap!" error message.
    Not one menu item displays without this.  I have tried the Google Forums, but receive no help/guidance at all.
    Any suggestions?  Peter

    Thanks Loner T!
    Great suggestion!  I now have data!
    In the system.log, there is a detailed track of the issues, all from today.  I now have the ammo to talk to Google directly.  My company uses GoogleApps and I know I can try to get support there.
    Best, Peter

  • Unable to install SQL Server Express 2012 with advanced services

     Unable to get file (SQLEXPRADV_x64_ENU) to execute (to start installation process).  I'm on Window7-64 - did move file from download area to its own folder within C drive.  Did find post about converting file to a zip (I'm using winRAR) but
    I only get AUTORUN text file with but will not unzip.
    [autorun]
    OPEN=SETUP.EXE
    ICON=SETUP.EXE,0
    Help  Thanks Brian

    Hello,
    Can you use below site to downloadSQL express with advanced services.1-3 G file is one you need to download .this would be direct executable file.
    http://www.microsoft.com/en-gb/download/details.aspx?id=29062
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Unable to install Xcode 4.3.2 with Mac OS X Lion 10.7.4 (on my Mac mini)

    I tried to install Xcode 4.3.2 from application store, after clicking the Install button, a message displayed as "Installing". (but no progress bar appeared)
    After about 30 minutes, (while installation was on progress), my Mac mini crashed and I had to turn off the power and restart it again.
    Now, if I try to install the Xcode again, nothing happens after I click the install button except the Apple store login dialog pops in and ask to login.
    (No folder named "Developer" has been created in my Application folder yet)

    Developer folder was not created anywhere, I had checked.
    But, latter I found an icon named "paused" in the 2nd page of my Launchpad. When clicking installating simply started and completed without any problems.

  • Unable to install OS X 10.4 with external display

    My display died quite awhile ago (broken hinges, broken cables, etc etc) but since then I've used an external LCD display without problems. Once I set the display to mirror, everything has been working great.
    However, I tried to install OS X 10.4 and discovered that, after booting up from the disc, the install program wants to display everything only on the nonexistent original monitor. If I keep moving the mouse to the right, it eventually appears on my external monitor. But pressing F7 won't toggle back to mirror mode -- the toggle capability seems to be disabled or something.
    Any suggestions? Is there some way (hardware-based or maybe command line?) to tell the machine that the original display no longer exists and to only use the external display?
    Thanks for any help!

    Hi, llkohler. The limited-purpose OS on the installer disc that underlies the installer application and boots the computer probably doesn't expect to have its life complicated by a second monitor, and doesn't contain the code that would allow you to toggle the display mode. If I were you, I'd look to connnect the Powerbook to another Mac in Firewire Target Disk Mode (with the PB as the Target) and perform the installation on it from the host Mac. Once you get Tiger installed, you should be able to toggle the display mode on it in the usual way.

Maybe you are looking for