I am Unable to install the driver for my Kodak ESP-3 on Windows 7 64 bit

I have gone to the Kodak site and dowloaded and ran the software and Windows is still unable to detect the printer. all the other Easyshare software is successfully installed. Windows is recognising it as a scanner (as it is an printer/scanner
combo 'All-in-One-printer') which works but i can not print. There is no error message other that 'Windows has not installed the drivers successfully' but is recognising the type of device as Kodak EasyShare Aio (camera).
I have Windows 7 Home Preimium 64-Bit SP1.
Please Help.

Hi,
If you installed the All-in-One Printer Software, you may navigate to the following path to open printer configuration:
a. Select Start > Programs (or All Programs) > Kodak > KODAK Printer Setup Utility.
b. Follow the on-screen instructions to set up the printer.
Also, you could contact the KODAK support for further help.
Alex
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

Click here and buy the DVD.
(115929)

I installed the driver for my hp t1300 and when i print, it opens my webbrowser

I recently installed the driver for my T1300. When I try to print from AutoCAD 2013, it opens a web browser and puts my print in the que on HOLD. Please tell me how to stop this from happening.

Hi Lazyadt,
The Designjet is a commercial product. I am linking you to the Designjet forums repost your question for better coverage.
Designjet Forum

Agere Ethernet Controller (ET-131x) - unable to install the driver

I need to install the following wired NIC:
01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
It seems that the "et131x" kernel module is necessary.
The web site bellow gives instructions on how to install the driver from sources:
http://dadams1969.googlepages.com/et131xkernelmodule
Unfortunatly I am unable to do it.
I have also tried to install the module compiled by a member at the following address:
http://www.archlinux.org/~tom/packages/
The module seems to be installed properly. A new folder is created in /lib/modules/
However, I am unable to load it.
# modprobe et131x.ko
FATAL: Module et131x.ko not found
#insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module format
Am I doing something wrong?
NB:
The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
Last edited by sylvain77 (2007-09-26 08:23:48)

Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
Get the new package in the same place as before, and let me know how it goes.
It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

Unable to install new driver for Quadro 4000

Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please help

Try downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About

Os 10.7.5; problems to install the driver for Officejet Pro 8600

I have just bougt the Officejet Pro 8600. First I tried the installation disc at the reply was that I had to conntact HP to get the latest installation version. So I did. Downloaded for the HP homepage at got the driver. When installing I got the same answer: get the latest version. Any suggestion so I could connect my iMac to the new printer?

Hi Heistein,
Welcome to the HP Forums.
I understand you are having trouble with installing the driver.
I would recommend to take a look through this guide. An 'Unsupported Operating System' Message Displays on a Mac Running OS X 10.7 Lion.
Hope this information helps, and have a great day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do i install the driver for a hp f4440 printer

how do i install the drivier for a hp f4440 printer

Hi,
What Mac OS X version are you using?

Not installed the driver for the printer HP DESKJET 2050 J510

I'm trying to install the drivers for the printer, but the step "connection to the printer" windows it just does not see. If I try to connect the printer without drivers, Windows gives an error message. (shown on screenshoot)

Hey @jmchich ,
Thanks for your post on the HP Forums!
I would like to apologize first off that I am not able to read the screenshots as this is the English HP Forum Support Board. I see you speak english, if are able to translate that message into english or switch your computer language that would be greatly appreciated.
Look forward to hearing back from you!
I worked for HP.

I can not seem to get the driver for my HP Photosmart C5180 with Windows 7. I can't find it.

I can not seem to get the driver for my HP Photosmart C5180, I can not seem to find it anywhere in the site,, I have 1 XP Pro and 2 Vista PC's running with my printer. I have been trying to find where I can find the driver for my HP Photosmart printer. Just tried to us a new Microsoft 7 PC. Where can I get it ?

From here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153481&task=...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My Macbook Pro Won't boot. Unable to find the driver for this platform

Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!

Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.

Unable to install twain driver for Epson scanner -- Leopard

I finally got the printer driver working for my Epson CX6600.
Downloaded the correct driver from the Epson website and all is fine.
But now my scanner won't work.
The CX6600 is an all-in-one.
The Twain Scanner Driver was paired up in the same download.
However, after downloading the installer file I was unable to install it.
The cursor just spins and spins -- and I then get a repeated warning window asking if I want to open this software downloaded from the Internet.
I have to do a Force Quit to get out of the installer app.
Ideas?
Thanks,
Danty

where you able to resolve this problem? I also have this problem. Can scan manually.

Windows 7 recognizes my HP Printer but won't install the driver for it

I just bought a brand new computer with Windows 7 64bit installed on it.
After hooking it up, I connected my HP psc 2175 All In One Printer to it.
Windows 7 recognized that I had an HP psc 2100 series printer and said that it would go online to look for the driver to install.
After 10 minutes of searching, it tells me that I need "troubleshooting" which means "go look for it yourself."
I went to the HP website and the only help I found was a page telling me how to get my Windows 7 to recognize my printer.
My Windows 7 already recognizes it.
What I need is an explanation about to make Windows 7 download the proper Printer Driver to allow my printer to work.
Any help?
Does this driver not exist for Windows 7 and HP PSC 2175 All In One Printer?

So the HP page says there is no driver at all for my Printer with Windows 7 ( Lucky Me) and that I need to configure my Windows 7 to use the automatic Windows Update to find a driver to install.
As I mentioned in my original post, it already did this.
It recognized my printer and then starting searching for a driver with no luck.
Anyway, next on the HP page it tells me to connect my printer to my computer with a USB cable and then Windows 7 will look for the most appropriate driver to make my printer work.
So I connect the USB cable and it dings once and that's it.
No message.
No downloading.
No status bar.
Nothing.
It just dinged to recognize that I plugged in the USB cable.
According to the HP page, I should get a window telling me that My Automatic Windows Update is complete.
Mine apparently didn't even start.
So now what should I do?
How can I make it download the generic printer driver without just expecting it to do so simply because a USB cable was inserted?

Windows 8.1 will not install the driver for Officejet 6310 All-in-One

Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library". Can anyone help please?

Hi AB-Comp,
Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
What Operating System are you using? Windows or Mac? What version?
Can you make copies with the printer?
How is the printer connected? Wireless, Ethernet, or USB?
Is the power cable plugged into a surge protector or directly to the wall outlet?
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How Do You Install The Driver For A USB-GPIB-HS?

I have a USB-GPIB-HS module. I'm trying to install it on a Dell Latitude E6510 laptop running Windows 7. I have LabVIEW 2011 installed on that computer along with the version of NI488.2 and NI MAX that came with LabVIEW 2011. During the process of debugging I've upgraded NI488.2 to the latest version from the NI website, v14.
The USB-GPIB-HS shows up in the Device manager in the Control Panel. It has a yellow exclamation mark (a "bang") next to in. It says that the device driver isn't working "This Device Cannot Start (Code 10)". If I "Troubleshoot" the device from the menu there it tries to download a newer driver, but it can't find one. The driver version is 14.0.0.49152. If I try to upgrade the driver in Device Manager it says that it's up-to-date.
In NI MAX the device shows up, but can't be used. It's name and serial number are given but the normal controls to use it don't appear.
I've heard that tinkering with the "GPIB Enumeration Service" can help, but I can't find where that service is.

The problem was that the USB-GPIB-HS modules I tried was physically broken. I tried another and everything worked.

I am Unable to install the driver for my Kodak ESP-3 on Windows 7 64 bit

Similar Messages

Maybe you are looking for