I am unable to make few Recurring information element link as standard link

I am unable to create standard element link for few information type element. These element is recurring.
I am getting message like, this field is protected.
But when I checked in system, there are few existing elements which have standard element link.
What could be the issue with new element?
Am I missing any setup?

any suggestion please?

Similar Messages

Unable to make use of ALV table in a standard component.

Hi All,
I am enhancing a standard wd component. I want to make use of ALV table in my enhancement. I am able to add SALV_WD_TABLE in "Used components". But the same is not getting reflected in "Component Usages".
Can anybody guide regarding this?
Regards,
Yugesh Adalam

Hi yugesh,
Sorry, for me also it is not coming in Enh mode.
Refer this thread:
Regarding enhancement for ALV usage Need Help!
Ans by Thomas:
Re: Component Usage in Enhancement
For the ALV, you can always do the data mapping dynamically in code using the SET_DATA method of the ALV Component Interface

I'm trying to sync my i phone. I haven't synced it in a few months, but the notice that comes up is itunes was unable to load data class information from sync services..what does it mean?

I'm trying to sync my i phone. I haven't synced it in a few months, but the notice that comes up is itunes was unable to load data class information from sync services..what does it mean?

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

NT Adapter unable to make connection

Hi,
I am trying to create a java application using the
Data Form component. I keep getting the error message
TN adapter unable to make connection when I use the data form
wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
TIA,
Phil
null

Hi,
I still can't get a JDeveloper 2.0 Beta to access a local
database.
Here is my configuration:
Oracle 8.0.5 Enterprise Edition for Windows NT 4.0 (SP3)
JDeveloper 2.0 Beta (Build 184)
Oracle Developer 2.1 and Oracle Designer 2.1.1 (installed
in the same Oracle home directory as the RDBMS)
All of the above are installed on a STAND ALONE machine with
NO network card installed. I am NOT connected to a network
either.
I have tried using the Oracle Thin driver, the OCI-8 driver, and
the Sun JDBC driver and still unable to make a connection to
the local RDBMS 8.0.5. I have tried every combination in the
Data Form Wizard. I even tried to access the RDBMS with the
Microsoft Loopback adapter. Does JDeveloper use SQL*Net or Net8?
Thanks in advance for your help.
Phil
JDeveloper Team (guest) wrote:
: Hi Phil,
: I posted some DB connect info a few weeks back, but it looks
: like it's faded off of the list. Here it is again (basically,
: to connect to an 8.0.4 DB, you need to use the 8.0.5 drivers):
: There have been quite a few postings on problems with
connections
: using JDBC in the JDeveloper 2.0 Beta release. This may help
: answer some of the common questions that arise. Please note
that
: the connection issues listed here are specific to the Beta
: release of JDeveloper. The production release of JDeveloper
will
: include Oracle 815 JDBC drivers, which should fix some of the
: limitations listed below.
: If this message does not help you fix your connection problem,
: please be sure to provide the following information in your
: posting to help us troubleshoot your problem:
: * version of the database you are trying to connect to
: * platform the database is installed on
: * is the database local or remote
: * what driver(s) you have tried connecting with
: The JDBC 8.1.4 THIN driver is provided as the default driver
with
: JDeveloper 2.0Beta. This driver can connect to 8.1.4 and
: 8.0.5 databases.
: If you are connecting to an 8.1.4 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.1.4 database and want to use the
: OCI driver, see
: the instructions below for switching your driver version. No
: 8.1.4 OCI
: drivers were available at the time of our Beta release. If you
: want to use
: OCI, you need to use the 8.0.5 drivers.
: If you are connecting to an 8.0.5 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.0.5 database and want to use the
: OCI driver, see the instructions below for switching driver
: versions.
: If you are connecting to an 8.0.5 database on Linux, there is a
: bug which does not currently allow this connection.
: If you are connecting to an 8.0.4 or earlier database (back to
: 7.2) and want to use the JDBC thin or OCI drivers, see the
: instructions below for switching driver versions.
: If you are connecting to a Personal Oracle database, use the
OCI
: bequeath method to connect.
: If you are connecting to an Oracle Lite 3.5 database, you will
: need to upgrade the drivers that came with JDeveloper 2.0
Beta.
: See the instructions below.
: Instructions for Switching Driver Versions (regular Oracle):
: 1. Exit from JDeveloper.
: 2. Open the jdeveloper.ini file in a text editor. This file is
: located in the JDeveloper bin directory.
: 3. Edit the IDE Classpath so one of the following appears
before
: ..\aurora\classes111.zip:
: ..\jdbc\lib\oci8\classes111.zip (to use the 8.0.5 thin or
OCI8
: driver)
: ..\jdbc\lib\oci7\classes111.zip (to use the OCI7 driver)
: 4. Save and close the jdeveloper.ini file.
: 5. Restart JDeveloper
: Optional steps to use the right driver at runtime within the
IDE
: - must be performed for each project that you will use the
: non-814 JDBC driver with:
: 1. Select Project Properties from the Project menu for the
: project you are working on.
: 2. Make sure the library for the non-814 JDBC driver you want
to
: use appears in the
: libraries list (if not, click Add to add it).
: 3. Select the non-814 JDBC driver you want to use and drag it
to
: the top of the list. It must appear BEFORE BOTH of the
following
: libraries:
: a. Oracle 814 JDBC
: b. Enterprise Java Beans (this library also pulls in the 814
: JDBC driver)
: Notes on using the 8.0.5 drivers:
: 1. If you are using the 8.0.5 thin driver to connect to a local
: database, type the name of your host, or the IP address. Do
not
: use 'localhost' for the host name.
: Instructions for upgrading to Oracle Lite 3.5 drivers:
: 1.Install Oracle Lite 3.5
: 2.Find the following files in <ORACLE_HOME>:
: olad2035.dll
: olite35.msb
: oljac35.dll
: oljdbc35.dll
: olobj35.dll
: olod2035.dll
: olodmg35.dll
: olrep835.dll
: olsql35.dll
: (these files will be refered as olite35-dlls from now on)
: 3.Copy olite35-dlls into <JDeveloper_Home>\bin
: 4.Create directory <JDeveloper_Home>\jdbc\lib\olite35
: 5.Copy <ORACLE_HOME>\Lite\Classes\olite35.jar into
: <JDeveloper_Home>\jdbc\lib\olite35
: 6.Open <JDeveloper_Home>\bin\JDeveloper.ini, replace
: "olite30\olite.jar" with "olite35\olite35.jar" in the
: IDE_CLASSPATH.
: 7.Launch JDeveloper 2.0
: 8.Create a Oracle Lite 3.5 Library:
: a. Select Tools | Default Project Properties from the menu.
: b. Click the Libraries button.
: c. Click the New button to create a new library.
: d. Name: Oracle Lite 3.5 JDBC
: e. Classpath:<JDeveloper_Home>\jdbc\lib\olite35\Olite35.jar
: f. Click OKto create the library
: 9.Select the Oracle Lite 3.0 JDBC library in the Library list
: and
: click the Remove button.
: 10. Click Add and select your newly created Oracle Lite 3.5
JDBC
: library from the list. Click OK to add it.
: If you already have a project defined and opened in the IDE,
: select Project Properties from the Project menu, and make sure
: your new Oracle Lite 3.5 library is listed in the libraries
: list.
: If not, use steps 9 and 10 above to add it to your project.
: phil (guest) wrote:
: : Hi,
: : I am trying to create a java application using the
: : Data Form component. I keep getting the error message
: : TN adapter unable to make connection when I use the data form
: : wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
: : TIA,
: : Phil
null

HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card

I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.

I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy

ITunes was unable to load data class information from Sync Services. Reconnect or try again later.

Ever since I upgraded to iTunes 10.4 I've been getting this dreaded message on many occasions when I try to sync my iPhone 4 or iPad 2 with my Win 7 64 bit machine. "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." What happens is that local content (music, videos etc) will sync properly to my iPhone, but other content (such as Outlook information, MobileMe stuff, etc) will not.
I have uninstalled and completely purged all Apple data from my PC (including hidden files and folders under Common Files and in the Registry) and reinstalled iTunes. Yet after one or two syncs, the same problem resurfaces. The other weird part is that the Sync Services crap-out message will happen after I do a successful sync, leave the iPhone connected to the PC, and don't even touch the computer for several hours.
I've actually developed a very tedious work around that seems to restore syncing if for a short time.
- Undock/unconnect all Apple devices from the PC.
- Close iTunes, MobileMe control panel, and Safari (if you have it).
- Start Task Manager (Ctrl + Alt + Del) and shut down iTunesHelper.exe and SyncServer.exe
- Open up a Windows Explorer window (like My Computer) and under Tools, Folder Options, View, toggle on Show Hidden Files and toggle off Hide Protected Operating System FIles
- In WIndows Explorer, navigate to "C:\Users\<your name>\App Data\Roaming\Apple Computer". Rename the folder Sync Services to something else, like Sync Services_Old.
- In WIndows Explorere, navigate to "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support" and double-click on AppleSyncNotifier.exe.
- Go back to your Folder Options and turn off SHow Hidden Files and toggle on Hide Protected Operationg System Files
Now you can start up iTunes again and connect your device. It should sync properly again (at least, until it doesn't once more).
Does anyone at Apple have any idea about this error or a solution?

I actually spent a fair amount of time on the phone with a senior Apple tech last week. He directed me to this topic:
http://support.apple.com/kb/HT1923?viewlocale=en_US
It's important that you go through the steps EXACTLY as described here and in the proper order. Also make sure MobileMe control panel is uninstalled (if you have it).
Interestingly, when I went through this procedure and then reinstalled iTunes 10.4 64-bit (didn't do MobileMe or Safari at this stage, but QT is automatically installed) everything worked perfectly. The aforementioned error messages disappeared and all is working flawlessly, as it should.
I hope my expereince will help! Give it a try.

I recently began getting an error message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." How can I correct this?

I'm getting the following message when I try to sync my iPhone in iTunes: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." This message began appearing a few days ago. Before that, the sync function worked just fine. Can anyone help? Thank you!

Hi vbsugihara,
Thanks for visiting Apple Support Communities.
You can find troubleshooting steps to resolve the error message you're seeing in this article:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
All the best,
Jeremy

"itunes was unable to load data class information..."

Hi everyone,
When I connect the iphone to my computer, the itunes recognize the iphone but it is thinking and after a few minutes the itunes drop me the following message:
"itunes was unable to load data class information from sync services reconnect and try again later".
I tried the following article: http://support.apple.com/kb/TS2690 , but still the problem occur.
What I can do?
(note: it's happen after I format the computer and before and after I update the IOS from 5.1.1 to 6 in the iphone)

Try this.
1. Windows Control Panel > Programs > Programs and Features
2. Remove "iTunes"
3. Remove "Apple Mobile Device Support" (this is mandatory!)
4. Reinstall iTunes
I have tried several methods and resolved the problem using the upper method.
I hope this will be helpful.

Unable to make purchases with my new Mac in iTunes Store.

I am unable to make purchases with my new Mac in iTunes Store.
I can buy with my iPhone or my company lap-top (Windows) without any problems. Only with my brand new MacBook Pro it is impossible.
When I try to authorize my Mac, sure dialog window appears and I give my ID and password. Then I get error message: "There was an error storing your authorization information on this computer. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." The same message I get, when I try to deauthorize.
If I try to buy anything (pushing button "Buy"), then I get following error message:
"iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads".
But I have such a permission!!! I can see it!!!
I have even made so, that "everyone" and "staff" also have permission "read and write" in folder iTunes and all subfolders.! :))
When I ask for "available downloads" immediately I get the same answer: " iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads"
I have done:
1. I have used the Terminal to correct the permissions (in Finder it looked correct anyway).                    -          NO Result.
2. With Disk Utility I have verified and repaired Disk permissions. (There were approx. 10-12 incorrect values and 3 of them concerned iTunes and other - Jawa ).           -           NO Result.
3. I have moved all iTunes files in Thrash and installed iTunes again (previously downloaded from App Store ).                    -          No Result.
4. I have verified Disk permissions with Disk Utility again. There was nothing wrong, but in spite of this I have pushed the button "Repair Disc Permissions".          -          NO Result.
5. New installation of iTunes again.           -          No Result.
Can it be, that the reason of a problem are not correct transferred data from my old MacBook?

with my new Mac
You have a warranty. Take advantage of it! Call tech support or call the iTunes store.

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

IPhoto Book "Unable to verify credit card information please try again"

Can anyone please help me?
When trying to order an iPhoto book I keep getting the following message:
"Unable to verify credit card information please try again"
-One click ordering is enabled
Would appreciate someones help on this.

Last year, and again this year, I was able to buy one iphoto calendar but then when I wanted to buy another to send to a different address, i kept getting the same error message, no matter how many times i double checked and re-entered my billing info. i finally figured out what to do (if i remember correctly, this came from apple customer service after many frustrating back and forths last year):
- go to the "buy calendar" window
- click "account info"
- click "edit shipping address"
- add a new address (the one you want to ship to)
- make that new address the default address
- delete all other addresses
- then buy it
it's really clunky, but it works for me. i'm assuming this will work for iphoto books, too.

In an extended classic scenario, how can we make few purchase orders to sta

Hi All,
In an extended classic scenario, how can we make few purchase orders to stay local (i.e. without copying it to the back end). The decision criteria to stay local is information other than product category, i.e. using pcard and the cart value.
Thanks
Murali

Murali,
As I said usually this integration is done using ALE - IDOCs. You can find the all the configuration do be done here.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
In this the filtering can be done at two levels.
1. Data Filtering
2. Segment Filtering
Data Filtering:
Data filtering can be done in dustribution model where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Look at BD64 where you can do the config for data filtering.
Regards,
Ravi
Note : Please mark the helpful answers

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

"Make this recurring" check box not visible on Mobile

I have created and successfully used a Donation button for my 501c(3) business.It works great in browsers on laptop and desktop computers.However, the "Make this recurring" check box is not visible on IPhone, IPod, IPad, Android Pad, or Android phone. How can I enable recurring payments on mobile phones?The URL on these devices starts: https : // mobile . paypal . com / us / cgi-bin / webscr ? cmd=_express-checkout-mobile ... Thanks in advance

Louisey,
Welcome to the forums!!
a few questions first...
a, did your site work in MobileMe initially before you purchased your domain name?
b, does it still work if you type in your MobileMe URL rather than the purchased domain name?

Unable to make adobe player work

I have downloaded version 11 of player numerous times because I keep getting requests, and nothing will play on my computer. The message says version is running, but I cannot watch any videos, as same request for latest version shows.

It is an adobe flash player running on Vista.
Date: Sat, 6 Apr 2013 21:59:55 -0700
From: [email protected]
To: [email protected]
Subject: Unable to make adobe player work
    Re: Unable to make adobe player work
    created by Pat Willener in Adobe Reader - View the full discussion
There is no such thing as "adobe player". There is Adobe Flash Player, Adobe Shockwave Player, Adobe Media Player - all different products. We also need to know your operating system and web browser.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5213224#5213224
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5213224#5213224
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5213224#5213224. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am unable to make few Recurring information element link as standard link

Similar Messages

Maybe you are looking for