I am unable to move app icons from one screen to the next, after 2.1

Can any one verify this?
I have restarted the phone, just in case and the behavior continues.
While on the subject, it would be nice if Apple could supply a MAC interface for rearranging the iPhone screens as it is not much fun on the phone itself.

Figured it out last night. it does work but you now have to kind of over along the boder before it jusmps over. I am pretty sure that before it sufficed to push the icon to the border in order to move it over.
I guess this new way is better as you really need to want to move it in order to switch screens.

Similar Messages

  • How to move apps from one screen to the next?

    In order to organize a bit the screens after installing several apps, how can we move them from one screen to the next?
    I've found it possible to place them in the lower bar and then replace them into the required screen but that's very slow...
    Any other way?
    Also, is it possible to place the apps where we want and not get them automatically reorganized (blanks filled)?
    Thanks,

    Sorry I guess the correct terminology would be 'virtual desktops'.
    You pass from one virtual desktop to another swiping left or right on the phone.
    I would like to switch conveniently an app (icon) from one virtual desktop to another.

  • HT4528 how do i move an icon from one screen to another on my Iphone 5?

    How do I mov an icon from one screen to another on my Iphone 5?

    Tap and hold an Icon until they begin to shake. Move the Icon towards the edge of the screen and hold for a couple seconds. The Icon will then "jump" to the next screen.

  • TS2634 my iphone 4s wont slide from one screen to the next and I have to double tap on an icon to make it work. How do I fix this??

    My iphone 4s wont slide from one screen to the next and I have to double tap on each icon to open it. I can hear siri talking and telling me what each icon or button I press is. How do I fix this problem? I have restored my phone to last saved but the problem still remains.

    My problem was fixed via your suggestion. Thanks. Then I heard, though it hasn't been substantiated by anyone I know, that pushing the the round "start" button after the unit is on three rapid times will solve the problem. Do you know if this is valid info?
    Message was edited by: wallyintouch

  • How can i move icons from one screen to the other?

    How do i move icons from one page to another?

    Tap and hold any icon for a couple of seconds. They'll all start to wobble. Tap and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
    You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

  • Is there an easy way to move multiple icons from one screen to another?

    I have multiple screens on my iphone 5c display.  I want to move multiple icons at the same time from one screen to another.  Is there a way to do this?

    You could put them all in a single folder and move the folder to another screen.

  • Unable to move app icons from home page, on my iPad, to another.

    It seems to only move apps when I hold it in landscape view. I've Just received the iPad back, after sending it off to apple to be fixed. It would open apps by itself, freeze and be generally unresponsive.

    Try a reset and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't help, I'm not sure what Apple might have repaired since they generally replace devices rather than repair them, but I would question them and see if they can help. They may have replaced your iPad with a "bad" device.

  • How do I move an app icon from one page to another?

    I would like to organize my Ipad2 but can figure out how to move the app icon from one page to another.

    Tap and hold down on an app icon until it wiggles. Then hold down on the icon and drag it about halfway over to the next screen and just hold it there for a second or two and the app will jump to the next page. Do it slowly and just hold the app on the edge of the screen. Don't try to drag it over quickly. It takes a little practice.
    Tap the home button when you are done and the apps will stop wiggling.

  • TS3274 How do I move icons from one screen to another?

    How do I move icons from one screen to another. 

    Hold down on one icon until they start shaking, then drag the icon to the edge of the screen, and the screen should slide to the next one, you can then drop it on that screen or drag it again to the edge to move to the next screen.
    Page 21 of the user guide explains this under Arranging Apps:
    http://manuals.info.apple.com/en/ipad_user_guide.pdf

  • Unable to move or copy from one library to another

    Hi All,
    I am unable to move my documents from one share point document library to another. I open both the libraries in Explorer view and try moving or copying. But i am getting this below message. please see below image.

    1.         What’s the size of the folder you need to move? Is it larger that 50MB?
    2.         What’s the version of operation system you are using? Is it Windows Server 2003 or Vista or XP?
    If the answer is yes, please try to copy and paste a file which has smaller size to see if it will work. If it works, you can refer to this KB http://support.microsoft.com/kb/900900
    to modify the registry keys to solve the problem
    1.         Click “Start”, click “Run”, type “regedit”, and then click “OK”.
    2.         Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
    3.         In the right pane, right-click the “FileSizeLimitInBytes” value, and then click “Modify”.
    If you cannot see the “FileSizeLimitInBytes” value, right-click the blank space in the right pane, click “New”, click “DWORD Value”, type “FileSizeLimitInBytes”, and then click “OK”.
    4.         In the “Edit DWORD” Value box, click to select the “Decimal” option. In the box under “Value data”, type a value that is larger than the size of the file that you want to download. Click OK.
    Note: The default value for the file size limit is 50000000 bytes.
    5.         Quit Registry Editor. Restart the computer.
    Hope this helps.

  • Move icons from one screen to anothe

    Move icons from one screen to another

    Press icons until the wiggle, then drag them to another home screen page.

  • Move Window from One Screen to the Other

    With multi-monitor setup, is there a shortcut key to move a window from one screen to another? This is about the only thing I miss from my old days of using a PC.
    Way too lazy to drag
    Thanks!
    Alex

    Saeven wrote:
    With multi-monitor setup, is there a shortcut key to move a window from one screen to another?
    no, there isn't and I don't believe you can possibly make one. I don't know how this works in windows but os x would need to know where exactly to put a window on the other screen. since screens often have different sizes that would be impossible. besides, with extended desktop there is no actual separation between the screens and a window can be partly on one screen and partly on the other.
    I'm afraid you are just going to have to drag.
    This is about the only thing I miss from my old days of using a PC.
    Way too lazy to drag
    Thanks!
    Alex

  • Can't get iTunes to move from one song to the next

    I'm using iTunes 7.3.1 on an iMac with OS X 10.4.10. Everything was working fine, but now I can't get the playlists to move automatically from one song to the next. All the songs play if I double click on them individually, but when a song is finished playing, iTunes does not move automatically to the next song. I have to then double click on the next song I want to play. Furthermore, neither the "next," nor the "previous" track functions work. I have tried fiddling with the control settings (Repeat Off, Repeat All, Repeat One), but nothing I have tried makes a difference. Bottom line: If I want to sit at my computer and hear a playlist on iTunes, I have to manually click on each song I want to hear. Not too convenient when I want to listen while walking on my treadmill! Anyone suggestions would be appreciated.
    iMac   Mac OS X (10.4.10)  

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

  • How do I stop iPod on my iPad from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop.

    How do I stop iPod on my iPad 2 from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop until it's told to play the next song. In iTunes I can uncheck the checkmarks next to songs, but I can't see where to do that on the iPad 2.

    How to use your iPod to move your music to a new computer

  • Deploy from one system to the next

    I have built an intranet application in HTMLDB for a client, and they are asking me for an easy way to deploy the applcation from one system to the next, say from develop to test and then from test to production.
    Their wish is to do this with the push of one button, now I know that that is quite hard to realize, but I'd like to know how you people do that. Right now all i can think of is remember what you changed, export it and import it into the new application, but that's quite a hassle.
    I found the export script in the utilities, but I haven't look at it closely enough to be able to reverse that process, is that the way it should be done?
    Wendy

    I can't believe that we are at version 2.0 now and
    that there is no decent solution to export and import
    what we made as a whole instead of all these separate
    things.Sad, but true.
    I have to explain to my customers who want to be able
    to work with HTMLDB that when they want to deploy an
    application from one environment to the next they
    have to:
    - export an application
    - export the css files
    - export the images
    - download the static files (because they can be
    exported but not imported(!) )
    - create a ddl of the schema
    - export csv files from the data in the tablesSounds like an opportunity to write a new utility. ;>)
    and then import it all one by one in the new
    environment
    and then hope they didn't forget anything and have to
    debug to find the differences between environments.
    Am I the only one that is running into this problem?No. Anyone that's developing and deploying production apps is in the same boat. Obviously, there are varying tolerances and circumstances that make this more or less of a pain for each of us.
    I am solely talking about the stuff in the database
    now, not the files on the filesystem.....If it's all in the database (which we know it is) then you can certainly bundle all of those steps into a nice little package (pun intended). Let us know how it comes out!
    Earl

Maybe you are looking for

  • File location and address corrupted, can not open pdf, any way to fix this?

    What is the easiest way to correct the file location and address  in a windows file system?

  • Tranfering video clips for Keynote in iPad

    Hello:          I have multiple video clips in Keynote in ultiple presentations (A, B, C, D, etc.). For each presentation, I have created seperate folders with video clips (e.g., A. Video Clips, B.Video Clips, etc.)          I read that I need to pas

  • Y560p BIOS Bug

    Hello. I am using Linux with my y560p. We have an issue with gpe18. It is causing high CPU usage and freezes on display while system is idle. There is a bug report on Linux Kernel: https://bugzilla.kernel.org/show_bug.cgi?id=61051 Lan Tianyu from Int

  • BB 9900 - Activation failed. An error was encountered when sending the activation transmission

    Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and

  • Passing items from one tab to another

    Hi there, I have two reports, each on a seperate tab, I would like to pass values from one tab to another, anybody know how I can achieve this. Thanks... Edited by: user9129179 on 10-Mar-2010 04:21