I am unable to open my current LR catalog. How can I take a .CR2 and. .xmp file to create a .jpg?

I work off my external hard drive. I am still able to access all files on the hard drive, however they are all .CR2 files and .xmp. I'm trying to take the files and create a .jpg. What is the easiest way to go about this?
HELP!

What happens that you cannot open the catalog??

Similar Messages

Links are set to open in new tab, not current tab. However since update to FF 14, they open in current tab. How can I change this back?

I would like links I click on to open in a new tab, not the current tab. In the Tools>Options, I have it set to do this. However, since the update to 14.0.1, I can't get it to open in a new tab. This is for all web sites and email.
What can I do to change it?
Thanks.

Thank you John99. I used a combination of your suggestions above. The "Reset Firefox" worked the best, after I did a System Restore!
Thanks for your help.

I have changed my apple I'd email address so when I log in it is correct. But when my friend iMessage me it only works to my old email not my current one. How can I sort this out???

I changed my apple I'd email address and when I log in I use that email and the right password both work. But when my friend iMessage me it only works if they send it to my old email address not my new current one. How can ai change my iCloud and iMessage address?? To match my current one?

So have you changed the accounts in the iCloud and Messages Settings?
Settings > iCloud > Account
Settings > Messages > Send & Receive

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version as Pages '09 and am still unable to open it in the earlier version of pages. Help?

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version in Pages '09 but am still unable to open it in the earlier version of pages. Help?

No, it isn't. Pages 5 isn't compatible with Pages 4.3 as it is lacking more than 90 features that Pages 4 has. So when you open a Pages 4 document in Pages 5 only the simplest documents will look the same in Pages 5.
Pages 4 can't open Pages 5 documents at all!! You have to export back to Pages 09 as I said above.
You probably will be more happy if you just use Pages 4 (Pages 09). There are many threads in this forum that describes the lack of compatibility between the two versions. Pages 5 is in my view not Pages anymore.
If you don't desperately need Pages 5 for moving documents over iCloud to new iOs devices don't use it.

How can i get the month and year of the current open Periode?

At the beginning of each month the booking period for the new month was not open,but i need to book material automatically with the last day of the old month. The booking period will change at the first working day between 13 and 17 a clock. when the booking period was changed i have to book with the current date.
How can i do this ??
Regards
Ralf

Hi Ralf,
here's a complete example:
DATA: last LIKE sy-datum, "ultimo of last month
      gjahr LIKE t001b-frye1,
      buper LIKE t001b-frpe1.
last = sy-datum - sy-datum+6(2) .
PERFORM check_period.
IF sy-subrc <> 0.
ADD 1 TO last . "-> next month
PERFORM check_period.
IF sy-subrc <> 0.
    MESSAGE a001(00) WITH 'no open fi period'.
ENDIF.
ENDIF.
*formatting for germany
CONCATENATE last+6(2) last+4(2) last(4) INTO bbkpf-budat.
WRITE: / bbkpf-budat.
FORM check_period.
MOVE last(4) TO gjahr.
MOVE last+4(2) TO buper.
CALL FUNCTION 'FI_PERIOD_CHECK'
       EXPORTING
            i_bukrs          = bbkpf-bukrs
            i_gjahr          = gjahr
            i_koart          = '+'
            i_monat          = buper
       EXCEPTIONS
            error_period     = 1
            error_period_acc = 2
            OTHERS           = 3.
ENDFORM.                    " check_period
regards <a href="https://www.sdn.sap.com:443/irj/servlet/prt/porta
l/prtroot/com.sap.sdn.businesscard.SDNBusinessCard?u=i
Wo3ssHlIihvCrADIEGqaw%3D%3D">Andreas</a>
Message was edited by: Andreas Mann

Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?

Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
Windows XP, all updates installed.

Hi,
One thing to slow it down: low ink. Please check ink cartridges and replace if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

How can I know the name of the file that the user has currently open ?

Hello
I'm developing a module for x3dv.
http://hiperia3d.blogspot.com/search/label/X3DV%20Module%20For%20Netbeans
I am going to add a button to open the files when I click it.
I just need to know how can I know the name of the file that the user has currently open in the editor. What variable holds it in Netbeans?
Thank you
Jordi

If you are using the JFileChooser to open the document, I would create another class with this included:
//initiate class variables
private File f;
//create JFileChooser
JFileChooser fc = new JFileChooser();
fc.setMultiSelectionEnabled(false);
fc.setFileSelectionMode(JFileChooser.FILES_ONLY)
//set the chooser to initialise File f with the file selected
int status = fc.showOpenDialog(null);
if (status == JFileChooser.APPROVE_OPTION)
f = fc.getSelectedFile();
public File getFile()
return f;
}

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

Sorry, yes this is Microsoft Excel. The Microsoft XP has Excel files denoted as xl, the later versions of Microsoft Excel are denoted as xls files. The later verions of Microsoft Excel open the xl files OK, does Excel for Mac not able to do this?

After installing Ableton 9, I am unable to open Logic 9 now. How to fix?

After installing Ableton 9, I am unable to open Logic 9 now. How to fix?

Well, Ableton was a crack version, which worked fine. I've since uninstalled it and still get this error message: The Application Logic Pro can't be opened-1712

HT4796 How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users?

How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
I just dont want to have to og in and out of 2 different accounts .. Help please.
-Nina

Sorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
So, in the Finder, select Computer from the Go menu.
You'll see Macintosh HD, double-click that to open it.
In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
If you have any more confusion, please stop and ask. We'll get there.
If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc. That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
A path that starts with ~/ means your Home folder, the one inside /Users named with your account name.

In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 4 (beta)

Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

Unable to prepare to publish (-49). How can i fix it ?, Unable to prepare to publish (-49). How can i fix it ?

Unable to prepare to publish (-49). How can i fix it ?, Unable to prepare to publish (-49). How can i fix it ?

Hi
My notes on this.
Error -49
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

I am unable to open my current LR catalog. How can I take a .CR2 and. .xmp file to create a .jpg?

Similar Messages

Maybe you are looking for