I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use
I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?
The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC
Similar Messages
-
I have a first generation Ipad and am currently running software version 5.1.1 I have tried to update it to a newer version both wirelessly and thru Itunes but have been unsuccessful. Am I stuck with the older version or is there another way?? When I do run the update, it gives me the "you have the current software" message.
Thanks.no - there is no upgrade available for the version one iPad past IOS 5
LN -
trying to update ipad2 its now asking to restore i click the restone bottom but its comes up with error 4013 help
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020. -
Hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off
hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off - any ideas?
See here - http://support.apple.com/kb/TS3694#error1603
-
Can't download my new iTunes songs. Maybe I had not done iTunes updates for a few months (?) so I downloaded what seems to be the latest iTunes to my computer and it still doesn't download my new songs. Am not to computer savy so I would appreciate any help. Thank you very much.
Do you, perhaps, mean "sync" instead of "download?" Please describe the problem you are having in more detail so we can better help you. Include the exact text of any error messages you are getting.
-
I cannot get Firefox to open on my CP. I have had to go back to Internet Explorer to get on the Internet.
Try the procedures in this troubleshooting article - https://support.mozilla.com/kb/Firefox+will+not+start
-
I have been without mu IPhone 4 since yesterday now as I tried to do the IOS6 update and since then it has messed up my phone and I am unable to access any of it's functions as it is locked on the update screen.
My phone was bought through Vodfone and have been on their network ever since, never had any problems like this.
It prompts me to connect to ITunes and when I do it will not go any further as stating 'No sim card is inserted in the IPhone you are trying to activate'. Well there is a sim in there and I have removed it and reinserted it on many occasions today. I am also not trying to activate my phone as all I did was try to the update which I was prompted to do in my setting!
I have seen many people on the net today with the same or similar problems but as yet I am to find a solution!
Help, please as it is driving me crazy!!!Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Is there a way to use my company's fonts when designing using the cloud applications?
I recently subscribed to the cloud and quickly learned that my company's fonts are not available. Is there a way to use my company's fonts when designing in the cloud applications rather than using their fonts?
Which Adobe application(s) are you talking about?
As an example, if you're downloaded Adobe InDesign from the Creative Cloud, there is absolutely no difference in the way it uses fonts from a copy of Adobe InDesign that you installed from a DVD. Both applications are run from your computer's hard drive.
Your company's fonts would need to be installed on your computer to use them in any computer application. -
hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off
See here - http://support.apple.com/kb/TS3694#error1603
-
I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?
Where did you download it from exactly? URL.
Exactly what computer is this. -
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al -
I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?
Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh -
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME!I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME! -
I'm trying to update my iphone 4 and in order to compelte the restore backup from itunes i need to turn off the 'find my iphone' but i cant get passed the restore backup stage - what should i do?
Hi beckiewinter!
I have some information for you that may help you understand your iPhone's Activation Lock more thoroughly:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
So in order to update your iPhone, you may need to turn off Find My iPhone. This can be done through the iCloud settings, and more information on those settings can be found right here:
iCloud - iPhone User Guide
http://help.apple.com/iphone/7/#/iph3c79652c
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
H:selectManyCheckbox and custom converter
Hi there Firstly, I am trying to implement a custom converter to capture choices a user makes on a check box(es), i.e. if they uncheck one or more boxes I want to use the converter to save this information. I have applied this logic previously for a
-
Cannot connect to apexlistener via SQL developer.
I cannot connect via SQL developer to my installed apexlistener (2.0.1) installed on Glassfish (3.1.2) webserver. In the server.log from this domain i always see following error messages; [#|2013-04-24T10:49:25.199+0200|SEVERE|glassfish3.1.2|null|_Th
-
In CS4 I would create a Title, making it look the way I wanted... then Open said title and hit "New Title Based on Current Title", changing the wording to whatever I needed it to be. -This helps to keep the formatting, color, etc. of my titles cohesi
-
Css only partially implemented in HS
In my css document I have the tag "body" calling for a background image, along with text color, font etc. All of them show in the Browse area of HS, except the background image. Also, I have a class for main_heading that seems to be totally ignored.
-
CS3 Design Premium will not reinstall after uninstall in VISTA
I booted up my system and had a system update message which I allowed to load (Vista Service pack 1). When I launched CS3, it said it had problems and to uninstall and reinstall it. The cd removed the software, but only loaded Adobe Acrobat 8 Profess