I am unable to open some emails from an exchange server.

Since I updated to iOS7 I have been unable to download most emails from a work exchange server. In most cases it appears to be downloading the message yet nothig appears after a lenghty wait.

A reset of the device is a good first step:
Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.
If you have already done this and it didn't resolve the issue, try remove the email accound and then re-add it.

Similar Messages

Config OES/sendmail to forward email from/to Exchange Server

Hi
I have installed an OES on a Red Hat ES 3.
But on my network i have a Exchange Server that send/receive all emails. And i cannot change here nothing(company rules). Now what i need to do? I need to config the Linux sendmail to relay on the Exchange Server(the exchange is now configured relay on Linux) to forward the emails that i need.
I only need this to one email account e.g [email protected] The Oracle Email Server is running, but i need to config the Linux to forward the email to the Exchange Server, and go to outside. Also i need that receiving an email to [email protected] that my Linux receive this email from the Exchange Server.
I have configured the sendmail.cf like Oracle says on the Administrator’s Guide manual. I have add the ip and name of the Exchange on /etc/mail/access to relay. But still i cant send emails outside. If i test the sendmail -v testuser, and all says ok. I have tested telnet domain 25, and all went ok.
I think the only problem is forward the oes to exchange to forward outside
Any help
Many thanks
Thank you
Jail

Hi andreas
Yes i also think that it maybe resolved by an alias and forwarding
Th COM is the domain in the OES is the com default. Is this domain that you referring?
The company domain that is in the OES(e.g xpto.com) is the same that is in the Exchange. Do you think this will be a problem? Must i create one like oes.xpto.com? To work with the OES?
I have created a relay on the access file, but is this ok? Or must i need change anything else? Mean while i will check that url
And yes i can connect to the Exchange on port 25 from the RH
Since i have several user/account created on the OES, the only think that i did not understand yet is how can they receive any email?
The fax@domain was a example. But i can collect all outside emails from that account and with some rules forward to any other OES account? I think this is possible? Or this is the hard way to configure the OES?
Thank You
Jail

How to read emails from Microsoft Exchange Server

I have microsoft exchange server and I want to read emails from microsoft exchange server. There is no POP3 server. So is it possible?
If it is possible to read emails from microsoft exchange server then please give me some idea.
Thanks
Santanu

santanu wrote:
Hi,
My company is using Microsoft exchange server.
IMPA and POP3 has been disabled, but my requirement is I wan to read email.Then ask the administrator of the server to enable IMAP. If you have a valid business requirement to do that, there would be no reason for the administrator to refuse.

I am unable to open some email messages

I had been able to open emails from a person until about 3 weeks ago, now I am not able to open emails on my cell ph from this person. I can open in my dash top computer. All other emails from everyone else will open. ???

You should really read the manual. Click Support at the top fo this page, then click Manuals.
You should be syncing to your computer regularly. Your game data is backed up when you sync.
First try a restart. This eraes nothing.
If that does not solve, then try a reset. This erases nothing.
If this fails then try a restore

Readinjg mail from Microsoft Exchange Server

Hi,
I neeed java code to read emails from Microsoft Exchange Server.Can somone please share the code.
Thanks in Advance
Rama

Thank you very much for the reply.
I tried to write the code .At one place I am getting the below error.
DEBUG POP3: server doesn't support TOP, disabling it
Exception in thread "main" java.lang.NoClassDefFoundError: javax/activation/DataSource
     at com.sun.mail.pop3.POP3Folder.createMessage(POP3Folder.java:333)
     at com.sun.mail.pop3.POP3Folder.getMessage(POP3Folder.java:314)
     at javax.mail.Folder.getUnreadMessageCount(Folder.java:761)
     at InboxReaderIMAPLast10.main(InboxReaderIMAPLast10.java:41)
Pls help me in fiding the reason
Rama

TS3276 i am unable to open web pages from email links on my ipad

I am unable to open web pages from email links on my ipad

A few more details might help, if nobody else recognizes this.
What happens when you try to open the links?
Can you post an example of a link that doesn't work?
Is there any particular source for the mail with the (bad) links, or is mail from all sources failing?
If you happen to know it, what's the format of the mail message? (Maybe the message is an image?)
Do the embedded links work as expected from an OS X system running Mail.app, or some system and some other other mail client?
To view the link in iOS: if you press on and hold your finger on an embedded link in most contexts, iOS will show a pop-up with the link contents, and will offer to copy it. You can use that to acquire and post the link. If pressing and holding on the link doesn't offer the pop-up, the format of the link itself may not be valid, or it might not really be a link.

TS3276 why can't i open SOME attachments from email and most of the time i can open them?

why can't i open some attachments from some emails and not on others?

Read this link from Apple for more info:
http://support.apple.com/kb/PH11778?viewlocale=en_US&locale=en_US
The Apple Communities is a free information resource, but posting the eventual answer helps future users to learn solutions.

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Unable to open Information Map from planning web Help menu

Unable to open Information Map from planning web Help menu
The error is :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Hi,
It should be accessing :- http://<planning server>:8300/HyperionPlanning/help/en/hp_information_map/hp_information_map.html
Can you access that address on the machine hosting planning?
The file structure on the web server depending on which app server you use should be something like \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\help\en\hp_information_map\hp_information_map.html
Cheers
John
http://john-goodwin.blogspot.com/

New BB Z30 Freezing, Docs are unable to Open, microSD card automatically formatted after restart, unable to open Some Pictures, Long time for Charging

I purchased a new BlackBerry Z30 recently from http://store.shopblackberry.com/store/bbrryus/en_US/pd/productID.298806900/categoryID.66826600/paren... and my Phone Model number is STL 100-5. I also purchased a Z30 Leather flip case manufactured by BlackBerry. I am using my BlackBerry Z30 along with the Z30 Leather flip case.
1) Within the first 2 weeks of receiving and using the new BB Z30 device, I noticed a problem of screen not responding some times. My phone has been freezed at the lock screen. My phone is not responding to any key except for the power button. So, I had an option of only restart/Turn Off my BlackBerry Z30 device. All the time whenever I had this problem, I have to restart my device in order to make it work properly again. I complained about this issue with BlackBerry Technical Support. They assisted me to reset the device to factory settings by taking a full backup. After reset also, I still had the same issue.
2) I am using Sandisk Extreme microSD card of 32GB with my BB Z30 device. Some times due to the restart option, all the data which I had on my microSD card is being erased and is filled with an unknown files.
3) I'm also unable to open some pictures which I have taken using BlackBerry Z30. As I observed, most of the pictures which I taken using Blackberry Z30 are unable to be open/view them after a few days. Still, I am able to observe the properties of those pictures. They are in JPEG format only.
4)Also If I create a Word Document on BlackBerry Z30 using Docs to Go Application and saved it. After closing that particular document and If I try to open it, the document file is not opening and projecting me an error of "This is not a valid .Doc file", but while I check the properties of that particular document it is in .doc format. I tried to transfer the file to my laptop using bluetooth. After a few seconds (approx 2-3 seconds) automatically the transferring is cancelled by the BlackBerry Z30 device. However, I tried to transfer the file within that short time using Bluetooth. While I tried to open it on my laptop using Microsoft Office 2013, the file is displaying with a squares of upto 4 pages while I had a content in it of 3 lines only. While I opened my file using Microsoft Office 2013, there is only squares available in that document.
5) My new BlackBerry Z30 is taking a long time of approximately 6-7 hours to charge the device from 10% to 100%
I request someone to help me with this issues. I would like to thank everyone who can help me with these issues in advance.
Solved!
Go to Solution.

On 7th of Jan 2015 I made my device to factory reset. Also I removed microSD card from my device. As I observed for these 3 days, one time while I received a missed call, I tried to have a look at it. I observed that my screen has been freeze at the receiving call position and its not responding. I tried to close and reopened the display of my device with a flip case which I'm currently using for my device. At this time, after 3-4 swipes to unlock the device, again its back into working condition.
About Documents, I'm able to create, save and open the documents without any issues till now.
About Pictures, they are also working fine without any issues.
I also observed the charging time as approximately 3 hours for charging the device from 14% to 100%.

I have Adobe reader installed. However, I am unable to open some files because it is asking for Adobe's approval to open the files. How do I do this please?

I have Adobe reader installed. However, I am unable to open some files because it is asking for Adobe's approval to open the files. How do I do this please?

That message is NOT from Adobe, and has nothing to do with Adobe's approval for anything.
Quite the opposite: Adobe Reader is NOT YET RUNNING, Adobe aren't involved. Some other app or program is putting out that message. Have you tried giving that permission?

IPhoto09 unable to open some jpgs

After spending two hours with a Mac Genius, who was unable to help me, I'm hoping someone here can.
I recently upgraded to iLife09. I started having problems opening up some pictures in iPhoto. Here are the issues:
1) I can see the thumbnail, but when I try to double click on it, the picture will open for half-a-second and then just gives me a black screen
2) It gives blank screen on some pictures, but not all. They're pretty random.
3) I can find the actual jpg files in the iPhoto library, open the files ok in Finder or Photoshop and edit them, so I know the files are not corrupt
4) iPhoto09 is unable to open some jpgs, if I resave the jpg as tif or gif then reimport them to iPhoto09, it opens fine
5) The worst thing is that it's all random, it's unable to open some pictures in different albums, but I can't detect a pattern
6) This is only happening after I upgraded to iLife09
7) I sent the disputed jpgs to a friend, who imported them to her iPhoto08 and was able to open them just fine
Can someone help me please?

I don't see color profile in Tools, I see Match to Profile and Assign Profile. The default selection is Generic RGB Profile.
In any case, all the pics was shot from the same camera on the same day. iPhoto will only open some, but not all. If I open the jpgs out of iPhoto, like Preview, I can open them all. I can also make edits to all pics in Photoshop but when I reimport those photos into iPhoto, it will open some, not all -- basically same issue as before.

Unable to open some forms

I have installed Adobe reader. I am able to open some forms from a particular website, but not others. The one I need it a fillable online PDF form. Why am I not able to open this form when I can open others in the same format from the same website?

I need some help on the Forms issue, users unable to open the Forms it gives following error.
FRM-40010: Cannot read form /ul01/app/applmgr/lasrx/gl/11.5.0/forms/US/GLXIQACC.fmx.
In fact those fmx are not in the above path, its in different mount point /ul03/app/applmgr/lasrx/gl/11.5.0/forms/US/GLXIQACC.fmx.Please post the output of the following commands:
$ echo $APPL_TOP
$ echo $GL_TOP
Was APPL_TOP set properly when you cloned the instance?
I am not sure from where it's reading the .fmxIt reads from the value of $GL_TOP
Could anybody tell where to check , might be some environmental files.Check the application context file as well as the application env file (search for u101 and replace it with u103). If you change the context file, run AutoConfig and bounce all the services.
Thanks,
Hussein

Since last update, unable to open PDF files from either banking site. The other (IE) works fine but I hate IE. I deleted newer versions and went back to older releases. No help, same thing. Checked settings in options. That is ok. What's up?

Unable to open PDF files from my banking statements.

I think almost every dev is on arch-general, so that is the place to contact the group in general. Specific points can probably be emailed to the dev involved, if one is identifiable and if the bug tracker is not a better place (bug reports to my email get ignored).
I think the whole problem here is that there is really no dev in charge of that package. So your emails were probably seen then skipped over by all devs thinking not my problem... (I know that is true for me). Then Andrea noticed an "orphan" package that needed updated and went ahead with it without connecting it to your previous emails, which is unfortunate.
Now our maintainer backend is fixed, hopefully we can get all the orphan packages adopted out, or at least know if we need to bring on new people to maintain them. That way, there should always be someone who information about specific packages should be sent to.

I am unable to open some emails from an exchange server.

Similar Messages

Maybe you are looking for