I am unable to overwrite the Useragent-String in the config in Firefox 4. Any Tipps?

In Firefox 3.6 I could add to the UserAgent-String with:
general.useragent.extra
But this doesnt work anymore.
Now I want to change the string the Netbook in order to the one of the Mobile versions of firefox.
How can I do that permanently?

Ways to add things to the user agent string have been removed from Firefox 4. You can replace the user agent sting using general.useragent.override

Similar Messages

Unable to Close the book in Firefox

Hi,
I am Unable to Close the book in Firefox when WebHelp Pro
application is opened through the robo server 7. When i open the
help application all the books will be opened and they cannot be
closed by clicking on them. But if i open the same file i.e.,
projectname.htm directly inside the program
file/adobe/roboserver..... it opens fine with all the books closed
and can be opened on click.
Adding to this each contextual call to the WebHelp pro is
opening in a new window in Firefox 2.0.0.12. But all these works
fine with ie7. Can anybody help me out in this regard?
Thanks,
Arun

This sounds pretty similar to an issue that I am
experiencing.
Basically in IE5 on Windows 2000, IE6 and IE7 on Windows XP,
the table of contents appear as required - all books are not
expanded, and once the user clicks on a book, the book is expanded.
However in IE7 in Windows Vista and in Firefox on all Windows
platforms, the table of contents appears with all books expanded,
and when clicking on a book, the book will not collapse.
However if the same page is directly navigated to (e.g.
http://servername.com/dir1/index.htm)
the table of contents appears correctly (all books collapsed and
users able to expand and collapse a book by clicking on it).

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini

My keyboard is not working, especially the letter a. I need to set up a new password but i'm unable to type the letter a. is there any way we can do it online to get access to my documents?

my keyboard is not working, especially the letter a. I need to set up a new password but i'm unable to type the letter a. is there any way we can do it online to get access to my documents?

my passwors begins with the lettera

Unable to overwrite the ODBC connection in runtime

Hi,
I have a VS2008 application which is using CR2008. Problem is I am not able to change the ODBC connection in runtime to any server other than the one that was used to create the report
We are using infoobject model to retrive the report form CMC.
Couple of thing I tried.
First One:
ConnectionInfo objConnectionInfo = new ConnectionInfo();
               objConnectionInfo.ServerName = "Server Name";
               objConnectionInfo.DatabaseName = "Database Name";
               objConnectionInfo.UserID = "UserID";
               objConnectionInfo.Password = "Pwd
               objConnectionInfo.IntegratedSecurity = true;
               objConnectionInfo.AllowCustomConnection = true;
               TableLogOnInfos objTableLogOnInfos = new TableLogOnInfos();
               TableLogOnInfo objTableLogOnInfo = new TableLogOnInfo();
               objTableLogOnInfo.ConnectionInfo = objConnectionInfo;
               objTableLogOnInfos.Add(objTableLogOnInfo);
                Crv.LogOnInfo = objTableLogOnInfos;
Second One:
                    ReportLogons logns = ceReport.ReportLogons;
                    ReportLogon logn = logns[1];
                    logn.UseOriginalDataSource = false;
                    logn.CustomServerName = "ServerName";
                    logn.CustomDatabaseName = "Database Name";
                    logn.CustomUserName = "Userid";
                    logn.CustomPassword = "Pwd";
Above methods I tries but I am unable to change my connection string,Some one please advise on this.

Make sure you have SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Try one of our sample apps:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
recommend vbnet_win_dbengine
Do this with a report that has no subreports 1st.
In your code samples, you are trying to use integrated security in one, not in the other. Is the report designed with Integrated security or not? Re. integrated security, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b021e47e-be1d-2b10-c6b2-efa9db3abd6b] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Wrt54g ver5, unable to access the config pages

wrt54g ver5
firmware ver 1.02.5
i am unable to access the internal web pages on wrt54g ver 5
can access the internet fine. it seems to be a memory corruption problem
i has been doing more and more times

Since the router works, it is doubtful (but still possible) that the firmware is corrupted. More likely there is another explanation for your problem. Here are my tips for viewing your router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Unable to get the output when i run any jsf page in adf

Hi,
I have created one jsf page to access the business components which i had created earlier after that when i drop the another panel splitter into the second facet of the initial panel splitter we created , I was unable to see in the workspace (.jpx) window.can you suggest me on this.
after done all the steps if I tried to run that page it starts the WLS servier and createda URL but the url is taking long time approx more that two hour and still not getting the required output only the loading window I can see.
Please suggest me on this.
Thanks
Chetan

Hi,
the panelSplitter should at least show in the Structure Window. So check if it is there. The runtime issue can be caused by the proxy settings. Go to Tools / Preferences --> Browser and Proxy and add localhost to the list of exclusion
If you are new to ADF I recommend running a tutorial like this: http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
Frank

For the past week I am unable to access the web using firefox even after downloading it again, why?

When I click on the firefox icon it was not opening up or it would open then say unable to make connection. I had no problem using Internet explorer. So I thought I should download Mozilla firefox again and I did. It seemed to be functioning but then reverted back to nonresponsive. I am able to contact you using internet explorer. What can i do?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Why does firefox now tell me that it is unable to load the browser because firefox is already running?

After the last 2 updates I have had trouble with the browser. It periodically tells me that I am unable to run firefox because the process is already running. I then need to go to the task manager, stop the firefox process before I can launch the browser

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

HT1937 e phone. I am unable to use the phone in india with any service provider here and the message when i insert a valid sim is 'invalid sim please contact your service provider'.

hi, i purchased 4S at paris (sfr) and got back to india without deblocking the phone. how to activate the phone in india ? Till date it has not been possible. Need assistance
thanks
unnikrishnan

That's because it's carrier locked. Only the carrier it's locked to can authorize unlocking it. Contact them.
Why did you buy a carrier locked phone?

Unable to Push the Config Frm NCS prime to CIsco WIreless Lan Controller

Hi Guys,
We have an issue with NCS prime, in our Network.
We run NCS prime 1.3 and Around 10 Wireless Lan Controllers (5508 & 4404) Models.
We are trying to Push a ACL Config Template from NCS to Wireless lan Controllers.
This ACL is already created before in WLCs, now we created the templates in NCS with few rules added and planning to push Configs from NCS template.
We are receiving errors SNMP operation to device failed. I am pretty sure it is not an SNMP issue.
Any inputs on this is much appreciated

Hi Scott.
I
I tried deleting the ACL from Controller totally and tried pushing it. it was not working neither
Raised a case with Cisco. They asked for few trace logs from NCS , told will check and get back to me.
IS there any more inputs, you can provide, which i can try to test it?
Regards
Safwan

Since upgrading to version 10, I am unable to use the Amazon Cloud Reader. Any ideas?

It worked prior to the upgrade and it works fine with Chrome.

Maybe they are not support beta version of Firefox, can you try with Firefox 9?
* getfirefox.com

How to make mac address gmail contacts overwrite the ones on my HTC Android phone - I don't want to sync - that makes the phone scramble and overwrite my computer. I want to remove or correctly overwrite the phone information as I have done with iPad.

Please help - I am beginning to hate google, my android and gmail. I have just wasted about 5 hours in a futile attempt to try and get my current Mac contacts list on my computer updated to my phone. I'm not that computer literate but I have looked up about google phone accounts, vCards, backing up contact lists, what SD on phones are, and God know what else. I have searched the internet and tried all sorts of things and I still have a mac with a now correct contact list (after the iPad contacts scrambled it and I spent ages manually correcting them all) and a phone with an outdated contact list. If you try and sync them the phone wants to overwrite the computer one just like the iPad did (would it be so **** hard to give you a choice on the phone as to which overwrites which!). After all the advice on the internet failed, I got the bright idea to completely delete all the ones on the phone and if it was empty of contacts the computer one could be exported to it. Not as simple as it sounds. First I backed up (I think) my computer contacts list. Numerous futile attempts to go through the phone options to globally delete all contacts did not work - they gave a warning message and you got to choose whether to continue or not, I did, and it looked like it might be working as it changed to zero data on the phone, but then they all popped back up again from God knows where from, but without their little added bits like pictures of the people. So, I tried un- syncing the darn phone from google and then deleting them globally. That didn't work either. I tried deleting them all again and again and google would crash and not let me do it. It is absolutely ridiculous that this is so damned difficult to do (especially if you are not computer savvy) and that you cannot choose which device overwrites which when syncing. I gave up and ticked sync with Google again (not that it appears to do anything to the phone contact list at all). So after 5 hours I am back to where I started from, with a phone showing all the same incorrect contacts (but the pictures are back), which wants to overwrite the computer if I try any sort of sync, and no way to fix them except go into each one manually and try and do it - and how long would that take (and I've already wasted hours and hours fixing scrambled contact lists!). I think I will do a print out of the computer contact list and just carry it around with me like an address book - so much bloody simpler. So now I have a headache, am fighting an overwhelming urge to hurl the phone at the wall, hoping for a heat wave to evaporate icloud things and am wishing I had bought an iPhone instead of the stupid HTC Android. Can any one offer me any suggestions on how to get rid of the contacts on my phone and replace them with the ones in my mac address list - hopefully after that they can sync to their hearts content and not stuff everything up again (which was why I unsynced google a while back - because the phone's list kept making stuff ups and scrambling and duplicating my computer contacts list). Am I the only one on the planet having this problem or is there someone else out there who has had it and solved it.

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

I am unable to overwrite the Useragent-String in the config in Firefox 4. Any Tipps?

Similar Messages

Maybe you are looking for