I am unable to pan my view using my magic mouse in maya.

i am unable to pan my view using my magic mouse in maya. panning needs a middle mouse button and there is no middle mouse button in magic mouse. scrolling sideways or up and down only zooms in and out. please help.

In Maya/Preferences/Interface/Devices, click "Two button" for "Mouse tracking." That will let you use opt+click for rotating, and opt+cmd+click for panning.
If you need actual middle mouse button functionality for any of the tools, then maybe the application Better Touch Tool can help. For the trackpad it has the option "Use special middleclick mode (for CAD users)," which works with three-finger click. I am not sure whether something similar will work for the Magic Mouse.

Similar Messages

  • How can I use my Magic mouse in a Macbook pro?

    I have an iMac and I'm using the magic mouse. I just got a Macbook Pro and would like to use the mouse with this computer too.
    How can I make it work in both computers?
    I won't use them at the same time of course. I use one during the day, and the other at night so I'm hoping to make the mouse work in both.
    Thanks in advance!!

    THANK YOU SO MUCH!!!
    You have been very helpful! I will try that! Thanks!!
    PS: One last question, will it work if I put it in "sleep" mode or it has to be shut down?
    Thanks again!

  • Macbook Pro keyboard and track pad freezes after a day or two of using bluetooth Magic Mouse

    The first time this happened I thought my 3 y/old 17" Macbook Pro had died. The mouse cursor had frozen to the top left of the screen and the keyboard was also frozen and no matter what I did it didnt unfreeze. Even restarting. I searched extensively online and the only solution offered was to re install the system software.
    The next day I took it into work, opened it ip there and the cursor and keyboard was working again.
    This led me to believe there was a conflict with my recently purchased Magic Mouse and/or bluetooth.  Even though I had been using the mouse for well over 3 weeks with no problem.
    I resumed using the Magic Mouse with the computer for another week and then the keyboard/trackpad froze again. The Magic Mouse remained active.  This time, I took the batteries out of the mouse and took the computer downstairs. After a couple of hours everything is working fine again.
    Has anyone had this experience and knows how to fix? Or am I resigned to using a wired mouse?

    I have never encountered anything similar. However, try resetting the PRAM and SMC.
    Barry

  • My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

    My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

    Usual first things to try are a smc and pram reset.

  • Smooth scrolling using a magic mouse

    Hi all,
    I've recently made the switch to Mac (sporting a MacBook Pro 15" retina early 2013) from Windows. I'm still using Windows through Parallels since I need to use Visual Studio for my work as a developer.
    Currently, I'm using a Razor DeathAdder mouse because it's simple, ergonomic (at least to my hand) However, scrolling in both OSX (10.9.4) and Windows (8.1) is a bit annoying since it's not smooth at all. It's quite "laggy", so to speak. Like it's scrolling in steps. I've tried some third party apps for OSX, but none of them have done the job in makeing the scrolling smoother.
    Then I came to think: if I use the Magic Mouse from Apple, will I get the same smooth scrolling as I do on the touchpad? Because in both OSX and Windows, it's really nice and smooth when using the touchpad on the MacBook :-)
    Can anyone confirm that scrolling is as smooth on the Magic Mouse, as it is on the touchpad in both OSX and Windows?
    Thanks a lot in advance.
    All the best,
    Bo

    Scrolling with the magic mouse is nice and smooth for me in both OS X and Windows (running in VirtualBox, I don't have boot camp set up as I don't need Windows that often any more and definitely have no need to boot it 'raw').

  • Zoom in in Preview Mode using a Magic Mouse?

    I am used to using a track-pad where I can easily zoom in on a document while in Preview Mode using ALT+Scrolling.
    Now I'm using the Magic Mouse and can't find a way to zoom in in Preview mode. ALT+Scrolling doesn’t work. Any ideas?

    The mouse settings might override the ALT key (on a Mac?) assignment of Indesign. Check the extended mouse settings.

  • I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro  retina???

    I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro  retina???

    There is a fix; I finally discovered how to clear the Windows 7 xx64 Device Manager's warning of a missing Bluetooth Peripheral device.
    Thinking Boot Camp 4.0 would correct thid, I installed it ititially today only to have the warning remain.
    The Bluetooth company called Broadcom (you notice the reference during the installation of Boot Camp) offers a BlueTooth "device finder" (my phraseology) that detects all BlueTooth devices in your Apple or PC but withing a Windows operating system; included are Windows 7 , Vista, XP and even 2000 operating systems.
    So download the 3 MB file, from Broadcom.com.  While your Bluetooth equipment is plugged in to the computer, run the program.  The program searches for any BlueTooth peripheral activated equipment and BlueTooth devices that makeup your MacBook Pro, or other Apple or a plain PC computer having a Windows operating system installed.  It then downloads the appropriate software required.
    The company's URL address:
    http://www.broadcom.com/support/bluetooth/update.php
    In my case, I ran the program, rebooted my MacBook Pro (in Windows 7 x64 and with the new Boot Camp 4.0 installed) and the missing BlueTooth peripheral device indication was eliminated.  It took 10 minutes to complete. 

  • What kind of bluetooth dongle(usb) should I get to use my Magic Mouse properly?

    My Mac Pro doesn't have bluetooth. What kind of bluetooth dongle(usb) should I get to use my Magic Mouse properly? I already have one, but it makes the mouse seriously lacking.

    I keep the dongle plugged into the back of my apple 27" monitor so that means it is only 1 to 2 feet away from the mouse.  Don't plug it into the mac pro itself if that is at any distance from the mouse.  The closer you can keep the dongle to the mouse the better.
    Do a smc and pram reset.
    If all is lost, and you have xcode installed then you can do a bluetooth factory reset.
    Note that if you should sleep your machine, power is off the usb's, so the dongle is off.  This means you cannot wake the machine with any BT devices like the mouse (I use a wired keyboard).  Also sometimes upon waking the machine the mouse does not immediately re-pair (maybe 20% of the time).  So you have to flip its switch to get the system's attention.
    While I do have internal BT, using the dongle disables the internal (at least for 2010 mac pro's).
    And of course BT would go inactive if you pulled the dongle out!

  • HT2845 I am using a Magic Mouse on my MAC computer but when I drag object/files etc it only move them a inch or so and then I can not drag the object anymore, help?

    I  am using a Magic Mouse on my MAC, when I drag objects/files etc after dragging the object for an inch or so the object stops and I can not drag it any further.
    Has anyone a solution, I have checked the batteries etc.

    I  am using a Magic Mouse on my MAC, when I drag objects/files etc after dragging the object for an inch or so the object stops and I can not drag it any further.
    Has anyone a solution, I have checked the batteries etc.

  • I have boot camp in my mac to use autocad. Can I use the magic mouse on my windows side and use it to work in autocad?

    I have boot camp in my MacBook Pro to use AutoCAD. Can I use the magic mouse on my Windows side and use it to work in AutoCAD?

    Yes and no. The gestures wont work so it just becomes a regular scroll-wheel mouse.

  • Can I use a magic mouse and apple track pad at the same time with my iMac

    Can any one help with my above question

    Yes, you can use the magic mouse, trackpad and wireless keyboard at the same time.
    Captfred

  • HT4111 Can I use my magic mouse with my wireless keyboard and iPad2

    Can I use my magic mouse with my wireless keyboard and iPad2

    Sorry, but no. Because the iPad does not have a cursor for you to use the mouse with.

  • Can I use Apple Magic Mouse with my IPAD2, have tried to connect them with Bluetooth without success

    Can I use Apple Magic Mouse with my IPAD2, have tried to connect them with Bluetooth without success
    Dag Ove

    I suggest that you request this feature, as I have, at Apple's feature request site. Maybe if enough of us request this it will come in a future iOS release.
    http://www.apple.com/feedback/ipad.html

  • Safari 6 Tab View: how can i use with magic mouse?

    How i can active tab view mode with apple magic mouse?
    Tnks

    THANK YOU SO MUCH!!!
    You have been very helpful! I will try that! Thanks!!
    PS: One last question, will it work if I put it in "sleep" mode or it has to be shut down?
    Thanks again!

  • HT4144 Last April I bought a new a iMac but I didn't need to use the magic mouse  until few days ago. It drives me crazy. I have changed so many butteries but keeps loosing connection. I haven't it on the wall yet but I might be close to. It has to be fau

    Why a magic mouse divours batteries? Why does it loose connection evey few minutes? Can I have it replaced?
    <Edited By Host>

    Hello again,
    Just idly thinking about your post mentioning you had only had it for 4 or 5 days. Such a problem rarely gets better with time, were you suggesting you hoped it would improve, in other words?
    I can see you are now aware of the packing option but if you are using Apple, Duracell or Energiser batteries packing it out should not be necessary.   Any other batteries I cannot speak for.  
    One buys Apple because of its' reputation against other products; you will be helping to maintain that by asking for an exchange.   You will feel better for it, and speak better of it.
    Forgive me if the opinion is a touch biased; I've been very lucky with my iMac purchase and the only exchange I ever made only enhanced my view of Apple; it went so smoothly.
    Thank you for the star.

Maybe you are looking for

  • Compilation error while deploying my BPEL process : ORABPEL-05215

    Hi, I have created a BPEL process and when I try to deploy it, am getting the following error : BUILD FAILED D:\SoftWs\JDeveloper\jdev\mywork\AIASamples\CreateCustomerPartyPortalProvABCSImpl\build.xml:79: A problem occured while connecting to server

  • HT1721 computer does not respond when connect to HDMI TV monitor

    macbook air does not reconize monitor from HDMI TV

  • Signature with digest instead data

    Hello there, I am making an applet to sign document located on a server. Actually I need to upload the entire document to the client computer to sign it. I would to use the digest (given by the server) instead the full document, if it is possible. It

  • IDOC STATUS 62

    HI Experts, I am processing an inbound idoc for material transfer request, In WE19 once i click on "Inbound Function module " button to process idoc. It process it successfully and also creates the Transfer request. In FM in which i am processing the

  • Floating Tables in Dreamweaver MX

    I'm not sure where to begin looking for this topic, so I'm starting here. Can anyone tell me where to find tutorial or instructions on a method to make the "main" area of my web pages center in the browser window, regardless of the size of the window