I am unable to pick a partition to format.

Partition drive with a 49 Gb partition with boot camp, insert windows xp pro disk and error message "No disk found....Free space 131072GB".
I am unable to pick a partition to format.
ALL info I have found relates to Windows 7 or vista but NOT XP.
ANY help would be GREAT !!.
Thanks

Thanks for your replies.
I have had to reformat the Apple disk to remove the XP as it does not have service pack 2 on it.
Installed Windows Vista and that removed ALL the Apple stuff
Now zero out the drive and reinstalled Apple os
Now using my wife's laptop...must get mine fixed. Would rather have a MacBook but just too much !!
Think the fan stopped which cooked the chip...opppps !!
Thanks again for your help

Similar Messages

Unable to pick up the file from Receive Location

BizTalk is unable to pick up the files from receive location.
My admin console is working so slow.
It is showing the problem of snap-in as follows:
I have checked all my receive location and its masking,it is working fine.
Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
It is not picking up the file from receive location.
I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
Prakash

For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance configured with your receive location is running. If the host instance is in
running state, restart the host instance and try.
Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
version of BizTalk and also ensure the service pack for your OS is updated.
Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Problem with payables open interface import-unable to pick invoice data

Hi,
I have put the Interface data in two staging table and then moved them to AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables.
Code:
insert into XXWU_AP_INVOICES_INTERFACE (
invoice_id,
invoice_num,
vendor_id,
vendor_site_id,
vendor_site_code,
invoice_amount,
INVOICE_CURRENCY_CODE,
invoice_date,
DESCRIPTION,
PAY_GROUP_LOOKUP_CODE,
source,
org_id,
OPERATING_UNIT
values (
ap_invoices_interface_s.nextval,
'INV345DJ',
'3317',
'14335',
'ACH NY1',
1200.00,
'USD',
to_date('01-31-2010','mm-dd-yyyy'),
'This Invoice is created for test purpose',
'WUFS SUPPLIER',
'Manual Invoice Entry',
81,
'WU_USD_OU'
insert into XXWU_AP_INVOICE_LN_INTERFACE (
invoice_id,
invoice_line_id,
line_number,
line_type_lookup_code,
amount,
org_id
values (
ap_invoices_interface_s.currval,
ap_invoice_lines_interface_s.nextval,
1,
'ITEM',
1200.00,
81
INSERT INTO AP_INVOICES_INTERFACE (SELECT * FROM XXWU_AP_INVOICES_INTERFACE);
INSERT INTO AP_INVOICE_LINES_INTERFACE (SELECT * FROM XXWU_AP_INVOICE_LN_INTERFACE);
I can very much see the data in Open Interface Invoices(Front End). But when I run the payables open interface import program with correct Operating Unit, Source and Batch Name, the program unable to pick the data from the interface tables and unable to create a invoice.
Note:
1] The program run successfully everytime, but there is no output in the output file.
2] In the Log file One Message is there saying 'Zero(0) invoices were created during the process run.'
3] All the initail setup is right, i think, because I ran the same program few days back and it was working fine and the invoices were created at that time. Now what is going wrong I am unable to figure it out.
Please help ASAP.Thanks in Advance
DJ Koch.
Edited by: DJKOCH on 17 Aug, 2010 9:51 PM

Can you run the program - Payables Open Interface Import with Debug mode set to Yes.
Once the program completes sucessfully verify the log file of the program and try to find out if there are any invoices which is causing the exceptions.
Also confirm that the invoices which are in the AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables are of the correct period in which you are trying to create the invoices.
Hope this helps.
Thanks and Regards
Manish Jain.

SAP QM unable to pick Code group & code in creation of defect in QA32

Hi every one,
I am new to QM , can any one guide me to solve this issue.
In T code QA32 after results recording, am trying to maintain defect document of one of reject MIC. But, i am unable to pick Code group or code. System showing error "Code group QM-Q contradicts the code group of the catalog profile "
Regards
Srinivas

Hello Srinivas,
Check below path and let me know what settings you have maintained.
Now, Also check your Catalogs profile, You have to maintain Catalog "Z" for the same catalog profile.
Amol.

"Unable to determine destination partition, disk or drive" when Media deployment is used

We are heavy users of MDT 2013's "media" deployments -- in fact, once we finish testing a new image build on our lab server, media is created and is the sole method we use to deploy new systems due to many limitations.
We ran into the following issue lately when using USB sticks or hard drives for our deployment media. Deployment of an OS image fails at the "Inject Drivers" stage. The hard disk inside the computer is formatted properly, but the TS fails with
the error "Unable to determine destination partition, disk or drive".
I dug into the logs, and it appears that "Inject drivers" does a check for where the \Drivers folder should be placed. The problem is that most USB hard disks and many higher-end USB sticks show up as "hard drives" rather than "removable
media" when plugged into the machine. Adding another physical disk that appears as a fixed disk with an NTFS partition apparently confuses MDT and you get this error message. I think any "ReadyBoost enabled" USB stick has to show up on the system
as a fixed disk rather than removable, so if you use these you might have this problem.
The only workaround is to explicitly specify the disk number and partition number to use when you invoke "Install Operating System." The drivers step must take this information when determining where to put the driver store.
Is there any other explanation for why this would be happening? We're stuck with media deployment for the foreseeable future, and until Microsoft fixes the problem with handling of split WIM files, we have to use NTFS formatted disks/sticks...this might
be making it harder for the MDT logic to determine where to put the OS.

MDT should be smart enough to know that it should Skip USB drives.
However if you have a USB 3 Hard DIsk (not a USB Flash Disk), that might be the problem
1. Try using only Flash Drives.
2. Try plugging the USB Hard Drive into a USB 2.0 port
3. Additionally try not to use USB Hard Drives that are *Larger* that the internal hard drive.
If you still have problems, can you copy your Bdd.log file to a public site like OneDrive and share the link?
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

[Solved] unable to mount harddisk partition or flash drive

After recent updates to gnome 3.4.2,i am unable to mount harddisk partition or flash drive .I have 2 year old arch installation with gnome.
When i click on partitions in nautilus,it says "Unable to mount program files \n Not authorized to perform operation"
Problem is not only while mounting partitions.
Wherever we need authorization .Like changing date and time ,changing user accounts using gnome UI etc.The unlock button is greyed out permanently.
even i am not able to shutdown using gnome menus. it just log me out only ,do not restart or shutdown.Though i can shutdown using shutdown command on commandline.
i run gnome using daemon method. not through xinitrc .
https://bugs.archlinux.org/task/25031?p … ekit#close
I found a similar discussion in this bug. But since, i do not use xinitrc, it is unlikely they will help me.
Can someone be kind enough to help me on this?
Thanks in advance.
Last edited by piyushbhatt (2012-09-11 05:48:57)

maybe changes in udev or any other package
you have polkit polkit-gnome
and you user is in optical, disks and wheel groups?
for me those above work in every sitation

B2b unable to pick the file from xml gateway

Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnu

Anuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

Unable to resize a partition.

Hello everyone
I `ve recently created a new partition on my MacBook Pro running OS X 10.9.4, and that was for install the public Beta of Yosemite, then i decided to delete that partition with Utility disks, then that space now appear gray, but the problem is when i tried to resized the partition dragging the lower right conner above, and then i clic "apply", nothing pass, So i was unable to resized the partition.
Could someone please help me .
here is a picture of UD.

As I suggested on your first post of this topic:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you have installed OS X you can use Boot Camp Assistant to create a new Boot Camp partition for Windows. Do not attempt to use Disk Utility or Boot Camp Assistant to create a third partition. You can have at most two partitions: OS X and Windows. You created a third partition which you then removed, and that is why this problem arose.

Unable to remove windows partition

Hi:
I want to remove my windows/boot camp partition to free up space on my hard disk. When I launch Boot Camp Assistant to accomplish this, it gives me the error message, "The startup disk does not have enough space to be partitioned. You must have at least 10 GB of free space available." Well, thanks for the warning, but I want to REMOVE the partition and thus increase the available space on my startup disk. But Boot Camp Assistant will not allow me to advance futher, and I'm forced to quit. Ideas?

David Anderson wrote:
No one has any ideas on this? Is it simply a case of terrible user interface design?
I have attempted to use Disk Utility to accomplish this task. It allowed me to delete the Boot Camp partition from my drive, but will not allow me to expand the Macintosh HD drive to use the entire hard disk. I keep getting the error message "Disk Utility was unable to verify the partition." I suspect this is because it was a Windows-formatted partition.
I have also deleted enough files from my drive so that there are 22 GB available, but Boot Camp Assistant still claims that I have fewer than 10GB available on the disk, and therefore refuses to show me the partition removal screen.
I'd appreciate any help that people might have.
Disk Utility is the wrong tool to use, it can (and will) cause problems. Backup your entire disk, erase and then restore it.

Unable to pick release the order.......

Hi!!!!
I am new to oracle apps,
I am unable to pick release, the status is showing in shipping transactions is showing as backordered, but the availability of the item is adequate enough.......
Kindly help..... and advice....
Regards

Welcome to the forum.
This is a common issue. Please search the thread for similar question.
The following thread lists a lot of culprits
Backorder although on-hand quantity exists
Also check the following on metalink
LINE STATUS 'BACKORDERED' AFTER PICK RELEASE ALTHOUGH SUFFICIENT QUANTITY AVAIL [ID 378240.1]
FAQ: Troubleshooting Stuck Pick Release and Shipping Transactions [ID 863761.1]
Reserved Sales Order Lines Getting Backordered While Picking or Shipping [ID 390683.1]
Hope this helps,
Sandeep Gandhi

Unable to wipe ZFS partition table from the disk

I used an SD card as part of a zfs zpool made of three SD cards, without partition table. ZFS was managing the entire devices, not just partitions.
I subsequently retired this zpool but did not run “zpool destroy”. This worked for two of the cards, but it seems as if one of the SD cards just can’t shake the zfs_member marker, no matter what I do.
So far I tried multiple times, on several different machines (including two without ZOL installed, so zfs cache file is not an issue here):
1. dd the entire device with zeros. Four times.
2. zpool labelclear -f /dev/sdc
3. create new msdos partition table in gparted and fdisk
4.
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/usb
mount: unknown filesystem type 'zfs_member'
Unable to wipe ZFS partition table from the disk
5. Windows format and Partition Minitools windows equivalent of gparted.
As you can see, none of those methods wrote over the zfs data. It remains intact and invulnerable to anything I tried.
I am out of ideas. It looks like google is out of ideas, too.

Yeah, somehow while writing the first post I missed that wipefs also does absolutely nothing.
# wipefs /dev/sdc
offset type
0x23000 zfs_member [raid]
LABEL: SD
UUID: 9662645799256520897
# wipefs /dev/sdc -o 0x23000
/dev/sdc: 8 bytes were erased at offset 0x00023000 (zfs_member): 0c b1 ba 00 00 00 00 00
# wipefs /dev/sdc
offset type
0x23000 zfs_member [raid]
LABEL: SD
UUID: 9662645799256520897

EQG-30281: Unable to detect index partition mode

Hello,
i tried to configure a search index run over a web source with Oracle Secure enterprise Search Server 10.1.8.4. But when the plan is executed the following error occurs:
15:58:47:712 INFO     main          Cookie support is enabled
15:58:47:712 INFO     main          Maximum number of cookies = 300
15:58:47:712 INFO     main          Maximum number of cookies per host = 20
15:58:47:712 INFO     main          Maximum size of cookie = 4096 bytes
15:58:47:712 INFO     main          Cache file deletion is disabled
15:58:47:712 INFO     main          SQL hook ID is "3"
15:58:47:712 INFO     main          SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
15:58:47:712 INFO     main          SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
15:58:47:712 INFO     main          Crawler launched by schedule "ocbwiki"
15:58:47:712 INFO     main          Bad title to be replaced = "powerpoint presentation"
15:58:47:712 INFO     main          Bad title to be replaced = "slide 1"
15:58:47:712 INFO     main          Zip file processing package is java.util.zip
15:58:47:712 INFO     main
15:58:47:712 INFO     main          =================== Crawling status ===================
15:58:47:712 INFO     main          Crawling started at 1/11/10 3:58 PM
15:58:54:634 INFO     main          URL manager connecting to Oracle...
15:58:54:853 INFO     main          connected
15:58:54:931 INFO     main          Queue manager connecting to Oracle...
15:58:55:150 INFO     main          connected
15:58:56:228 ERROR     main          java.sql.SQLException: ORA-06550: line 1, column 20:
PLS-00302: component 'IS_INDEX_PARTITION_ENABLED' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
15:58:56:244 ERROR     main          EQG-30281: Unable to detect index partition mode
     at oracle.search.crawler.WebCrawler.init(WebCrawler.java:897)
     at ImtCrawler.run(ImtCrawler.java:1954)
     at ImtCrawler.main(ImtCrawler.java:534)
15:58:56:244 ERROR     main          EQG-30249: Crawler process aborted
Anyone an idea?
Regards
Stefan

I believe this error indicates a failure to properly upgrade from 10.1.8.2 to 10.1.8.4. SES has been upgraded but the underlying Oracle Text installation has not for some reason.
If this is a fresh installation, I would suggest dropping the whole thing, reinstalling 10.1.8.2 then upgrading to 10.1.8.4. If it's an installation with lots of sources already crawled, suggest you log an SR with support so they can help you figure out how to recover from this.

Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
drive so all data gone included the drive which was encrypted by bit lockers.
For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first
http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
my data then i format the drive D and again tried to recover data using above software after decryption still no result.
Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support

Few questions about partitioning and formatting in Windows 8

Hello,
I'm very shortly after a Windows 8 reinstall and I want to make use of this moment to finally understand partitioning and formatting in Windows 8.
Before using Windows 8, I was an XP user for 5 years and I actually never bothered myself with formatting my main system partition, that's probably why my computer ended up working like a slime for the last years. Anyway, by now I have been using Windows 8 for a year.
Three weeks ago I faced a system-related problem with my laptop (IdeaPad Y580) which prevented it from peacefully shutting down. A good friend of mine (XP user for his entire life, and now Windows 7 newbie user) told me, that I should keep all my non-system stuff on separate partition and that I should do the main system partition format from time to time to keep my PC out of trouble. It is sure that he took his knowledge from using XP, and here's my first question - does this method apply to Windows 8?
I mean as far as I know, back then, in XP, partitioning was possible only during Windows installation, and now, in Windows 8 we have a Disk Management for this, which do not require running Windows installation to create new partitions.
I'm mentioning this due to the fact that originally (I mean by factory settings) my drive has only one visible partition - C: (1TB), so I would need to use the Disk Management to take some space from C: partition and allocate it to the new D: partition.
In case I do this whole partitioning operation and create a D: partition, is it sure that formatting my system-only C: partition won't have effects on my D: partition, and all the programms and data I have here will stay on their places and work after format? (I'm worried about this because I've seen in some partitioning guide a warning not to format the main partition after the partitioning operation, because it would erase totally all data - I'm not sure if I misunderstood something or is it a mistake? EDIT: here's the link for this guide, just jump to the "Final Thoughts" section to see what I'm taking about: http://www.technorms.com/8438/windows-8-create-hard-drive-partition ).
If this whole method of keeping your system running fine doesn't apply to Windows 8, I guess I'm okay with having only one C: partition.
By the way, it doesn't matter for me if I create new partition in terms of conflicts with preinstalled Lenovo OneKey Recovery, since I had to reinstall my Windows 8 recently from non-Lenovo CD, and either way my laptop is now totally clean, without Lenovo stuff (I found Lenovo Recovery CD for Y580 on the internet, but it had non-single-language Windows 8 in it, and I needed a single-laguage one in order to have my Product Key recognised, so I just used a pure Windows 8 SL installer)

I just found out that I can't even transfer my Users folder or Program Data to other drive than the one with the system, because it would prevent me from updating my system or even from actually booting to my system. So apparently my whole topic is for nothing... I guess I should live with only one drive, and whenever my system totally crashes again I should do the backups to my external HDD. It's sad though that Windows 8 is a total opposite to user-friendly OS, to say the least.

Thunderbolt partitioned and formatted hard drive not recognized on USB2/3

I have a MBA (mid 2012) and recently purchased a Seagate Desktop Thunderbolt Adapter (STAE129), a Seagate Backup Plus 4TB USB 3.0 external drive (STCA4000100), and Apple Thunderbolt cable. The 4TB hard drive can be separated from the USB 3.0 adapter and the drive placed on the Thunderbolt adapter. I created two partitions (3TB and 1 TB) on the 4TB drive while it was mounted on the Thunderbolt adapter and formatted them Mac OS Extended (Journaled) using partition map scheme GPT. Everything works as expected, the drive hits r/w speeds in the 180 MB/s range (using Blackmagic Disk Speed Test), and no issues at all transferring data to the 3TB partition and using the 1TB partition for TimeMachine.
However, if I disconnect the hard drive from the Thunderbolt adapter and place it on the USB 3.0 adapter and connect it to my MBA, Mountain Lion says "The disk you inserted was not readable by this computer and gives me the options to Initialize, Ignore, or Eject. Going into Disk Utility app, the drive shows up without the partitions I created when the same drive was mounted to the Thunderbolt adapter (just shows disk1s1). In fact, the drive label (Disk Description) is different too and the Partition Map Scheme now shows MBR!
To try work-arounds, I went ahead and repeated the partitioning and formatting steps with the drive attached via USB 3.0 and all works fine until I put the drive back on the Thunderbolt adapter where once again OSX reports that the disk is not readable. I've even tried a single partition with no luck. In short, the drive partitioned and formatted on Thunderbolt is unrecognized under USB and vice versa.
Shouldn't the disk preparation and data be consistent across these different interfaces? I would think so. My biggest concern is that if I had a failure in the Thunderbolt setup (assuming the drive itself does not fail), then I can't access my data. This is not a very comfortable situation.
I'm assuming I've overlooked a very basic detail. Appreciate any steer to solve this problem.
Thanks,
Rob

Thanks for that, I recently ran into the same problem. I even chatted with Seagate tech support and they didn't know the answer.
My situation is a bit different from you. I bought the 3 TB Thunderbolt version of the drive directly and then purchased a USB 3 adaptor seperately. You see, I still own a 3 year old Macbook Pro that doesn't come with a Thunderbolt port. I was looking to upgade to a MacBook Air later. I thought that I might as well buy the TB version now.
In anycase, my old MacBook Pro won't see the drive when I use the USB3 adaptor. I get the same exact error message as you did. I can't really test it on Thunderbolt since I don't have one. I'm going to go install the Thunderbolt drivers now and hopefully, it will recognize the drive afterwards. I'll let you know what happens.
BTW, I was thinking of reformatting the drive with NTFS so that I can use the drive on PCs. My mac has the NTFS drivers loaded so it's no problem. I hope this won't screw up the Thunderbolt connection later when I do get the Macbook Air?

I am unable to pick a partition to format.

Similar Messages

Maybe you are looking for