I am unable to print a copy using my 3510e printer

I am unable to print a copy of a document using my 3510e printer

Hi @birdhouse632 , do you run into an error when copying from your printer? Please check your printer firmware and install the latest firmware using the printer front panel as shown here. 
Although I am an HP employee, I am speaking for myself and not for HP. *Say thanks by clicking the "Kudos! Star" which is on the left* Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves
I work for HP but my posts and replies are my own.
I work for HP but my posts and replies are my own.
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else .....

Similar Messages

  • Unable to print PDF files using Acrobat 8.

    I had to uninstall and then reinstall Office for Mac 2011.  I don't know if it's related or not,  but since doing so I have been unable to print PDF files using Adobe Acrobat 8. After opening a PDF file and hitting print, Adobe Acrobat 8 crashes. Any suggestions?  I already uninstalled and reinstalled Adobe Acrobat 8, but it still won't print PDF files. O

    While you are having difficulty in printing a PDF file, you may try the  subsequent steps. If you are in a rush and would like to print a simple  document such as a letter, a form, or a calendar, you may print it as an  image. Next option is that you may need to update your printer driver   if the PDF does not print, the PDF prints as a blank page or with  unreadable text or if you get an error message when you print.  Sometimes, when you print a file that is on a thumb drive or a network,  the file gets damaged. Then you have to open the copy on your hard drive  and print again. At last, you can try printing the PDF using another  printer and check your printer connection too if the PDF does not get  printed. get more help to fix unable to printer PDF file hope this helps you.
    Good Luck!

  • How do I use air print, after updating to 7.0 on iPad am unable to print. Pretty fed up with apples tricks

    Unable to print to hp printer AirPrint after update to 7.0. 7.1

    AirPrint Setup and Troubleshooting
    http://www.apple.com/support/ipad/assistant/airprint/
    How to print from your new iPad using AirPrint
    http://www.imore.com/print-ipad-airprint
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • I am unable to print color photos from i photo using a Brother Printer

    I am unable to print color photos from i photo using a Brother MFC-6490CW all in one.  The photos appear to be in grayscale.  I have checked the printer settings, but for some reason I am not able to access the color management on my printer from printer set up.  It only gives me the standard option.  I have spent hours checking Bother's website and Apple's and I am not able to come up with a valid answer.  I know that the color print works.  If I print something from the internet of from outlook it will print in color.  I know all of my cartridges are in working order, I have cleaned the print head on my Brother, but I am still not able to print photos in color!!!
    What puzzles me the most is why I am unable to really access the color management menu on my printer?  It just does not come up.  I have the option from paper handling to print photos, but this has nothing to do with the quality.  I have also tried printing the photo from an Adobe PDF file and I still have the same problem.  Can anyone point me in the right direction?  Thank you.

    In the Print dialogue box click on the little triangle to the right of the name of the printer. That will expand the dialogue box.

  • PDF: Unable to print a document as PDF from APEX when using the BI Publishe

    Hi,
    From an APEX application, I am unable to print a document in a PDF format when using the Oracle BI Publisher.\
    Here is the configuration:
    1) Server A is W2K3 and hosts the Oracle BI Publisher server, with IP address ip01.
    2) Server B is a OEL5.2 and hosts the database server of the APEX application, with IP address ip02.
    3) Machine C is a W7 desktop from which through an URL both the APEX applicationn and the BI server are accessed, with IP address ip03.
    4) The APEX application is configured with the following to use the Oracle BI Publisher:
    - Printer server: Advanced (requires Oracle BI Publisher)
    - Printer server protocol: HTTP
    - Printer server host address: ip01
    - Printer server port: 9704
    - Printer server script: /xmlpserver/convert
    - Network services are enabled (at least I did get any warning/error message)
    From C, I access the the APEX application through its URL, if I try to download a page by selecting PDF in the download section of the interative report section for that page, I am unable to open if and get the error:
    <file>. pdf file can not be opened because the file type is not supported or because it is damaged (because, for example as an e-mail attachment is not sent and correctly decoded)
    Yet, still from C, I am able to open any other PDF document.
    The same way, still from C, acessing the APEX application through its URL, I have a query report defined with a PDF output format. Then, when I test the report (Test Report in the Report query) for that query, I get the error:
    ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
    At first sight this could be a wong entry in the priinter configuration for APEX. But with this address, through the URL I can log in to the Oracle BI Publisher server.
    Does someone has an idea what the problem could be?
    Thanks for any tips.

    How are you trying to print to pdf?
    Don't go via PostScript or Acrobat Distiller, which are old deprecated technology.
    You use:
    Menu > File > Print > PDF (button bottom left) > Save as PDF…
    Peter

  • On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

    On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

    I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
    Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do.   Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.

  • I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

    To try to resolve this problem, I have done the following actions.
    1 - I have run Disk Warrior.
    2 - I have repaired permissions.
    3 - I have deleted all plist that are either Cannon or Adobe.
    4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
    I am still unable to print PDF's.
    In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
    In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
    Any help would be greatly appreicated!

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

    I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2.  Every time I try to perform a Test print I get an Error msg.  I'm using driver version 1.3.0.261

    https://discussions.apple.com/message/23765195#23765195

  • I am using reader 11.0.10.32 Win7 64 bit.  I am unable to print from Reader.  After selecting print all pages, the pri

    I am using reader 11.0.10.32 in Win7 Professional 64 bit.  I am unable to print from Reader.  After selecting print all pages, the progress bar goes through the proper page count. After that a pop up window appears with the message: The document could not be printed.  After pressing the OK button that pop up closes and the next pop up window appears with the message: There were no pages selected to print.  After pressing the OK button, the pop up closes and the pdf document is still visible in Reader.
    I can print from other programs to that printer.  I can print from Reader to other printers.
    I was able to print to all printers before.  I uninstalled Reader and reinstalled it from the Adobe web site.
    Any suggestions to make it print?
    Thanks.

    Answered multiple times every day: open Adobe Reader | Edit | Preferences
    under Documents, change 'View documents in PDF/A mode' to Never
    under Security (Enhanced), disable Protected Mode at startup

  • Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

    Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

    Hi,
    Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
    Thanks,
    Shakti K

  • I have a Samsung Convoy "dumb" phone, and I plan to keep it until Verizon forces me to some **** overpriced "smart" phone.  Since they migrated Backup Assistant to "the Cloud", I am unable to print a hard copy list of contacts. The web site just runs you

    I have a Samsung Convoy "dumb" phone, and I plan to keep it until Verizon forces me to some **** overpriced "smart" phone.  Since they migrated Backup Assistant to "the Cloud", I am unable to print a hard copy list of contacts. The web site just runs you around in circles, never getting to the answer of how to print out contacts.  I'm sure the marketing people and web creators just love this Frankenstein monster they have built, but for me and my phone, it's just a huge pain in the ***!  Do they plan to fix this, or just let us dinosaurs go away and die?

    there is a point : no workie
    how hard would it be to place my (or yours I am told) iPhone4S on a city block curb………..
    and just walk away.. .. ..

  • I have been using firfefox 3.6.8 since release and have had no problems running Windows 7. Today, I am unable to print anything from the internet using firefox. IE 8 as well as all other programs print fine. Any suiggestions appreciated. Thjansk.

    I am unable to print using Firefox 3.6.8 starting today. All other programs print fine including IE8. I am using Win7 64bit. I did not change any configurations and voila - today the problem started.
    Thanks for any help.

    See http://kb.mozillazine.org/Problems_printing_web_pages and [[Printing a web page]]

  • Unable to Print to Epson printers using LPD on PPC, works on Intel

    After updating to Leopard, I am unable to print to my network printer Epson 870 and CX6400 from my G5 Imac. Everything worked fine with Mac OS 10.4.x. It works from my MacBook running Leopard. I am unable to select (even using browse) the appropriate Gutenprint V.5.1.3 driver. It fails to output to print server. From my MacBook all my network printer works - Samsung ML-1710, Epson 870 and CX6400. From the PPC Imac, only the Samsung works.
    If I share the printer from the MacBook, the iMac sees the printers and automatically selects the appropriate Gutenprint driver. I am using IPD. I also tried Window. I can not select the Gutenprint drivers. For the 870, I tried selecting Epson Stylus Color and Photo series 1.3 and Epson CX6000 series driver.
    I've reloaded the drivers from Apple and also tried Epson's drivers. I haven't tried loading the standard (non-Apple) gutenprint drivers.
    Any help will be greatly appreciated. Thanks.
    Al

    I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
    You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
    One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
    I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
    I hope this helps.

  • Why am I unable to print using Control P?

    After updating a computer in the office to Windows 7, from XP, I am now unable to print using the Ctrl +P keys. This feature works on the same websites on both the old OS and other computers running Windows 7 in the office. When I try it give me the error message, "Some printing functionality is not currently available". What can I do to fix this?

    You can try to reset print prefs on the <b>about:config</b> page.
    *http://kb.mozillazine.org/Problems_printing_web_pages
    *https://support.mozilla.org/kb/how-print-websites
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config

  • I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

    I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

    Does the entire webpage appear in Print Preview? <br />
    File > Print Preview

Maybe you are looking for

  • Grantor Objects Migration from Legacy System

    Hi All, I have a scenario in which I will be requried to migrate Grantor objects (Programs, Application, Claim, Change Request, billing documents) from legacy system. I checked the busines objects for Application but could not find the Create Method

  • For the blue screen at Leopard install, this tech report works for me

    http://docs.info.apple.com/article.html?artnum=306857 I used the second "solution" and my system booted properly after typing in the command lines mentioned in the article. Good luck

  • Installing 9i on win2003 server and patch 9.2.0.6

    Hi, here's my problem: I want to install the Oracle 9i DB Standard Edition on a win2003 server. In the download page, I have the following options: 1) Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32

  • What software can replace iWeb since it is not supported on Lion?

    I had to buy a new MacBook Pro.  Mine was stolen.  I had used iWeb on my last MacBook Pro to set up a website for my business.  I therefore do not have access to iWeb and Lion doesn't support it. What app or software will let me work with my existing

  • HP 3852A Data scanning speed

    Hi Labview users I have 3852A DAQ, which is connected by GPIB-USB-B. It's data scanning/updating speed is lower than expected. It's reading 32 data (23 of thermocouple, and 9 of analog voltage), and the data updated every 2 seconds (While loop is set