I am unable to print main VI due to "image.ccp"

I am abla to print sub VI but when try to print main Vi it says Failure:"image.ccp" line 11326.

Jeremy,
I think that there is more to it than this. I have a test set that has been running essentially the same software for 2 years. Win 2K, LV 7.1. The print section of the program hasn't been changed. A month ago we had this problem intermittently. We updated the printer drivers, and changed to a different printer (different type) all to no effect. A week or so later it mysteriously stopped. Now the problem has returned. If we select File>>Print Window it will print OK. I have tried both Print Panel.vi and Easy Print VI Panel or Documentation (string).vi.
Jim
Jim
LV 2013

Similar Messages

Unable to print main window and associated secondary windows in next page

Hi All,
iam print line items values in first page by using main window (table) and associated terms &condition in second window(template).
But i want terms & condition to printed in other page.I tried to create COMMAND to manually trigger second page but it doest work.
Kindly suggest.
Attached is snap shot of current output(Shaded region are space of dat window).Also attached is overlapping of main and secondary windows.
Since i need to increase the above template sizes i shifted main window and other 2 secondary window downwards so i wanted them to print in next page.

Hi abhijeet,
Add Programming lines before Command before loop statement,
In that Count the itab using describe table.
Add condition if count EQ Sy-tabix.
pass to command line.
Try this,
Regards,
Venkat.

Unable to Print Dunning Notice due to Payment menthods

Hi Gurus,
I had configured Dunning and also attached payment methods to the Customer Master. When I run Dunning, even though the procedure is completed, I am unable to see the Dunning notice. When I remove the payment methods, I am able to generate the dunning notice.
It is important for me to have payment methods attached to the customer master and I also want to use Dunning.
Can somebody help me in this regard.
Prasad

Solved the issue myself.
If a customer has a payment method in the master data that means "we" pay ourselves by pulling in the customer's payment usually by direct debit or some such means. We are therefore responsible for ensuring that we get paid, not the customer. Are we going to dun ourselves? No we are not. We are going to use the payment run to create the customer payments. Therefore standard SAP does not allow dunning to these customers.
If your payment method is not used by the payment program but is purely an information on how the customer pays (e.g.
check) delete the payment method because it is doing nothing except preventing dunning.

Crm_ml_preview - Unable to print with smartforms with bitmap images.

I'm using CRM 4.0 and I've an issue on Enterprise Portal when I try to print an Activity.
In fact, If I press the botton "PRINT" a new window opens with following URL:
http://myhost:8080/sap/bc/bsp/sa/crm_ml_preview/ml_preview.do? ...
If the smartform linked, has a bitmap inside (for example the company logo) I receive from this linhk a blank page. If the smartform contain only text, everithing is printed correctly.
With SAP gui, inside CRM system both smartfoms (with or without bitmaps) are printed correctly. This problems arise only when I try to print the activity from Enterprise Portal.
Any suggestion to solve the problem?
Regards
Luca Sozio.

It's an HP P3005dn (duplex+network) printer. OS X simply recognized the printer on the network and set itself up accordingly (without the option of selecting PCL or Postscript). The Windows computers in the office, though, - ugh - it was ugly getting them set up. None of them would recognize the printer on the network, and couldn't even browse for it and find it. I wound up having to download Bonjour for windows, and set it up that way. I downloaded the drivers from HP.com, and believe I set them all up to print using PCL.
It sounds like PCL v. PostScript may be the issue; is it possible to print using PCL on Macs?

Bands in pictures printed from Preview (due to image expansion?)

When I print a color picure from Preview, areas of medium color like an evening sky show bands about one inch wide. parallel to the print head movement direction. So one inch tall band will be lighter, the next darker. These are subtle differences, but ruin the print. I've contacted Epson who told me to try all the things I had already tried e.g. clean, calibrate, & align printer, new Epson brad ink, etc. They said if that didn't work it was the computer, or the cable, which I find unlikely. So I then tried printing from Gimp and Picasa, which did not have the problem, but also printed at the correcct size instead of expanding the image to fit the paper. This happens with both small images 320X231 as well as large ones 1600X1200
I read a comment in the community written in 2009 that said "After you choose File -> Print, under the "Orientation" section, about halfway down, is a drop-down menu. Choose "Preview" in there. After that, use the Scaling options to get it to print the size you want." I tried that but it doesn't change the size of the printed image. I also tried fiddling with the image size on the Tools menu but that didn't help. It seems like the only way to shrink the image on the paper is to change to a smaller paper size, which is a workaround. So if anyone can point me to a way to scale down the printed image sizee I'd appreciate it.
Are these bands being caused by the expansion of the image? It's being blown up about 60%. Any thoughts?
Background: Preview version 5.0.3, OS 10.6.8, printer connected directly via USB. Printer is Epson Workforce 633

DavidHNelson wrote:
Not a fan of iPhoto. Alll that content smushed into one file.
All what content smushed into one file....?
David, I have over 40,000 photos in iPhoto dating back as far as 2002. I can easily find any one of those photos in seconds and make a perfect print of it in any size that I want.
DavidHNelson wrote:
I don't know what Apple was thinking about with the design of that software.
OK never mind, you seem to have your mind made up and are not willing to do much more than complain.

B210a Unable to Print from Photo tray

I have recently purchased a Photosmart Plus B210a. However, I am unable to print photos from the photo tray even though I have set the printer properties to do so. It repeatedly tries to print from the main paper tray. Can anyone help???

Hello,
As far as I understood you noticed that unable to print with device due to not pick up or feed paper from the Photo Tray.
Please try to perform the following TS steps at link;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02686262&cc=us&lc=en&dlc=en&product=4021935&tmp...
hope it helps,
Take it easy,
Say "Thanks" by clicking the Kudos Star in the post that helped you
Although I work for HP,my posts and my replies are my own
please mark the post that solves your problem as "accepted solution"

Unable to print BSEG-SGTXT in Main window - SAP Script

Hi
I have an issue in Scripts.
I want to print BSEG-SGTXT in my Main Window and below is my code but i am unable to print the text. while debugging, i am getting value in zsgtxt field, but i am unable to get/print in script.
can any one help me why it's not printing? and plese suggest where it's wrong.
In Main window:
/:   PERFORM TEXT IN PROGRAM ZFIGS_CHECK_PRINTING
/:   USING &REGUP-BELNR&
/:   CHANGING &ZSGTXT&
/:   ENDPERFORM
CH   &ZSGTXT&
In Subroutine pool:
FORM text TABLES intab STRUCTURE itcsy
                         outtab STRUCTURE itcsy.
DATA: zbelnr(10),
        zsgtxt LIKE bseg-sgtxt.
READ TABLE intab WITH KEY name = 'REGUP-BELNR' .
IF sy-subrc = 0.
    MOVE intab-value TO zbelnr.
    SELECT SINGLE sgtxt INTO zsgtxt FROM bseg
          WHERE bukrs = '8140' AND
                belnr = zbelnr.
    IF sy-subrc = 0.
      MOVE zsgtxt TO outtab-value.
      MODIFY outtab INDEX sy-tabix.
    ENDIF.
ENDIF.
ENDFORM.
Thanks,
Siva

Hi,
Can any one tell how to write loop statement in Main window to display BSEG-SGTXT. As i am getting text (BSEG-SGTXT) from subroutine pool and calling into Main window using Perform statement and printing duplicate text in multiple times insted of different text.
Thanks,
Siva

Unable to print multiple line items in Z-SAP SCRIPT

Hi ALL,
We have a scenario where in we are calling the Driver program (RFKORD50) for Document Extract(F.64), Where in we have attached the Z-Script to the program(RFKORD50),
Unable to print multiple items.
1) Checked with all the elements in STD program for printing multiple items in main window but unable to get all the items we are able to fetch only 1 item .
(&BSEG-BUZEI&,,     &BSEG-SGTXT&,,,,&BSEG-DMBTR&)
2) I have also tried with external subroutine but it also didnot work.it is fetching the latest value.
Ex: if we have 3 items say 1,2,3 first 2 items are not getting fetched it is taking 3rd item and printing it straight away(Problem is it is not going to script for fetching the first item).
see the perform which i have used
/: PERFORM ITEMS IN PROGRAM ZTFI_ZNV20296
/:USING &BSEG-BUKRS&
/:USING &BKPF-BELNR&
/:USING &BSEG-GJAHR&
/:CHANGING &V_BUZEI&
/:CHANGING &V_SGTXT&
/:CHANGING &V_DMBTR&
/: ENDPERFORM
IL &V_BUZEI&,,     &V_SGTXT&,,,,&V_DMBTR&
Please suggest me whetther we can call write_form from external subroutine. or is there any loop commands in SAP SCRIPT Form.
Regards,
Jana

Hi!
The LOOP is always within the printer program. In this case also.
Just check out the RFKORI35 include, the LOOP begins in the 215th line (in 4.6C).
SORT HBSEG BY BUKRS SORTP1 SORTP2 SORTP3 SORTP4 SORTP5
                      BELNR GJAHR BUZEI.
        LOOP AT HBSEG.
*         WHERE BUKRS = SAVE_BUKRS.
          SAVE_BUKRS = HBSEG-BUKRS.
          IF ( HBSEG-KUNNR = SAVE_KUNNR
          AND   NOT SAVE_KUNNR IS INITIAL )
          OR ( HBSEG-LIFNR = SAVE_LIFNR
          AND   NOT SAVE_LIFNR IS INITIAL ).
            CLEAR RF140-ELEMENT.
            RF140-ELEMENT = '521'.
            CALL FUNCTION 'WRITE_FORM'
                     EXPORTING WINDOW    = 'MAIN'
                                ELEMENT   = '521'
                     EXCEPTIONS WINDOW    = 1
                                ELEMENT   = 2.
You might try out to write your code within the 521 elemnt in the sapscript.
Regards
Tamás
Edited by: Tamás Nyisztor on Jun 12, 2008 3:34 PM

Unable to print/scan- unable to communicate with printer message

I am unable to print due to a unable to communicate with printer error messaege. I was previously able to print just fine( a few hours a go) the IP addy has not change. The printer is connected to the network and able to download updates etc just fine. The printer is connected but they just wont recognise each other. Print and scan doctor was a complete waste of time, it showed the printer insatlled but then could not connect. Can someone please help getting so very frustrated with these products. Printer is the 6700 All in one series and laptop is Hp Envy.

Hello @leilee , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're experiencing connectivity issues. I would like to help!
I would first recommend a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend utilizing this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to print in Reader X

I am unable to print in Reader X, also it happened in Reader 9 - perhaps with the (clean) install of Snow Leopard from Leopard. I am also using Neo Office (an OpenOffice for Mac). Neither the Print Icon, nor the Print menu work - it does not bring up the dialog at all in X. In 9xx, it would ACT as though it printed, but fail with a "no pages were selected", even though they were. So, today I uninstalled 9xx & installed X fresh. When it didn't print, I reinstalled it. It still doesn't work.
Any help appreciated. (I can print just fine from other apps. ; main printer right now is networked Xerox Phaser 8560)
Log entries:
12/30/10 7:57:34 PM    AdobeReader[2653]    *** WARNING: Method selectRow:byExtendingSelection: in class UIT_NSOutlineView is deprecated. It will be removed in a future release and should no longer be used.
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: _CGSFindSharedWindow: WID -1
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: CGSOrderWindowListWithGroups: invalid window ID (-1)
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: CGSOrderWindowList: NULL list pointer or empty list
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    :59:06 Acrobat Plug-in load failure: Comments *** ImportReplaceAndRegister returned FALSE
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19:5
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    9:06 Acrobat Plug-in load failure: Multimedia
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]     *** ImportReplaceAndRegis
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    ter returned FALSE
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19:59:
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]    07 Acrobat Plug-in load failure: Updater *** ImportReplaceAndRegister returned
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]     FALSE
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.1-Patch-2-Intel.pkg
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.2-Patch-1-Intel.pkg
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.2-Patch-2-Intel.pkg
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    2010 12 30 20:01:53 Acro
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    bat Plug-in load failure: Comments *** ImportReplaceAndRegister returned FALSE
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    2010 12 30 20:01:5
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    3 Acrobat Plug-in load failure: Updater *** Imp
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    ortReplaceAndRegister retu
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    rned FALSE

For the record, Mac 10.6.5.
PDFs are the problem, I also see no link for a "possible" solution. Every other application can print, including Firefox, Neo (OpenOffice for Mac), Preview, etc.
My workaround has been to close Acrobat Reader, then open the PDF in Preview and print from there.

Unable to Print to Epson printers using LPD on PPC, works on Intel

After updating to Leopard, I am unable to print to my network printer Epson 870 and CX6400 from my G5 Imac. Everything worked fine with Mac OS 10.4.x. It works from my MacBook running Leopard. I am unable to select (even using browse) the appropriate Gutenprint V.5.1.3 driver. It fails to output to print server. From my MacBook all my network printer works - Samsung ML-1710, Epson 870 and CX6400. From the PPC Imac, only the Samsung works.
If I share the printer from the MacBook, the iMac sees the printers and automatically selects the appropriate Gutenprint driver. I am using IPD. I also tried Window. I can not select the Gutenprint drivers. For the 870, I tried selecting Epson Stylus Color and Photo series 1.3 and Epson CX6000 series driver.
I've reloaded the drivers from Apple and also tried Epson's drivers. I haven't tried loading the standard (non-Apple) gutenprint drivers.
Any help will be greatly appreciated. Thanks.
Al

I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
I hope this helps.

[SOLVED] Unable to Print from CUPS - DBus Errors?

Hi all-
I'm unable to print on CUPS after doing a recent system upgrade. Not excatly sure what's going on, but below is an output of the error log. Just as a side note- I have two arch machines. The one I'm having problems with has XFCE, my other arch has aweosme and cups works fine. So we can rule out the actual printer as being the problem.
A few of the errors below are attempts to cancel a test print page job and getting forbidden. Not sure why this would happen other than possibly not logging in as root, but that's not even the main issue. So yea, any help would be appreciated.
Just one more thing, I've noticed in /etc/cups that one of the config files was renamed to cupsd.conf.pacnew. Anyone know why pacman is over-writting those config files?
W [27/Mar/2013:12:37:37 -0400] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_EPSON_Stylus_Photo_R220
E [27/Mar/2013:15:37:31 -0400] Returning HTTP Forbidden for Cancel-Job (ipp://localhost/jobs/44) from localhost
E [27/Mar/2013:15:39:22 -0400] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://localhost/printers/EPSON_Stylus_Photo_R220) from localhost
E [27/Mar/2013:15:40:34 -0400] Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost
E [27/Mar/2013:15:40:34 -0400] [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
E [27/Mar/2013:15:41:19 -0400] Returning HTTP Forbidden for Cancel-Job (ipp://localhost/jobs/44) from localhost
E [27/Mar/2013:15:42:07 -0400] Returning HTTP Forbidden for Purge-Jobs (ipp://localhost/printers/EPSON_Stylus_Photo_R220) from localhost
E [27/Mar/2013:15:42:31 -0400] Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost
E [27/Mar/2013:15:42:31 -0400] [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
Last edited by w201 (2013-03-27 21:57:26)

Inxsible wrote:
w201 wrote:Just one more thing, I've noticed in /etc/cups that one of the config files was renamed to cupsd.conf.pacnew. Anyone know why pacman is over-writting those config files?
In fact, it's not overwriting the config file, which is why you have a pacnew file. You need to read up a bit more on pacman and pacnew and pacsave in general.
You should merge any and all pacnews with your corresponding config files if pacman tells you that it has created a pacnew file during upgrade. Don't just replace them with newer versions though, because it can lead to bad things like locking you out of the system if you do that for certain files like group or gshadow etc.
You're completely right, it's not overwriting the files, hence pacnew... bad choice of words.
***EDIT***
Okay....well, I read up on pacnew and pacsave. Thanks for pointing that out, Inxsible. Merging the files solved the problem.
Thanks again!
Last edited by w201 (2013-03-27 21:57:00)

Unable to print office 2010 document to the printer.

Hi All,
Greetings of the day.
Due to MS office upgrade to 2010, i am unable print document. I am using CV120_START_APPLICATION function module but with this i am able see print preview only.
Kindly do the needful.
Regards,
Yogendra

You see, this is what happens when the question doesn't have sufficient information to provide an intelligent answer. You're saying "i am unable to print document", but what document? From where? What have you already tried to resolve this yourself (maybe try another FM?)? And what is the actual question?
Simply by looking at the FM description I gather it has something to do with DMS. If you go to Google and type in 'DMS print document site:scn.sap.com' there are 1000+ hits. Are none of them helpful?
Going forward, kindly refer to this blog and this one before posting a question.

I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters

I am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters

Start up in safe mode
http://support.apple.com/kb/PH4373   <<< click here.
Restore your computer’s software
http://support.apple.com/kb/PH3840   <<< click here.
http://www.apple.com/buy/locator/   <<< click here.

HT4356 unable to print from my ipad mini

unable to print from ipad1 or ipad mini. tried all suggestions in support. This problem has been highlighted before is there a a problem with an software upgrade. I have hp 5510 that works fine fromPC.

I rebooted my BT router, Switched printer off and on, Checked printer on same wifi as router. closed ipad wifi to forget this network and reselected.
Printer worked OK on my ipad1 up until a few months ago it has never worked on my new ipad mini. works from my PC.

I am unable to print main VI due to "image.ccp"

Similar Messages

Maybe you are looking for