I am unable to print to my hp deskjet 1000

I have a macbook pro and an HP deskjet 1000, when i try to print it says the printer is offline. I have uninstalled it and reinstalled it like the printer instructions recomend, but it still says offline.

"Reset the printing system" as described here: Mac OS X: How to reset the printing system
You will need to add the printer again.
It could be as simple as a bad USB cable. If you have another, try it.

Similar Messages

HP Deskjet 1000 Printer - J110a cannot print in color using WIndows 8

J110a cannot print in color using WIndows 8. The printer will only print in black and white even though it works fine on a PC with Windows 7. I installed the latest drivers from the HP web-site.

Hey @KC1964,
Welcome to the HP Support Forums!
I understand that since installing your HP Deskjet 1000 Printer on your Windows 8 computer you have not been able to print in colour. Because you are able to print fine from a Windows 7 computer we know that this issue is not being caused by your printer. I would like to assist you today with resolving this issue. I'm thinking that your machine is either experiencing a driver conflict or a setting issue within the Windows 8 computer. Please follow the steps below.
Step 1: Check Settings:
Open your Start screen by selecting the Windows button on the bottom left hand corner of your computer screen or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl button
Once the Start screen opens type Devices and Printers
Click on Devices and Printers
In the Devices and Printers folder right click on your HP Deskjet
Select Printing Preferences
In the Preferences window select the Advanced button on the bottom right
Look for the Greyscale or Print Black Only and make sure they are disabled
If all settings are correct, yet the issue persists, please proceed to the next step.
Step 2: Try Alternate Driver:
To confirm if this issue is specific to the Deskjet 1000 driver I am going to have you load an alternate driver on your machine.
Open your Start screen by selecting the Windows button on the bottom left hand corner of your computer screen or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl button
Once the Start screen opens type Devices and Printers
In the Devices and Printers folder right click on your Deskjet 1000 and left click on Printer Properties
Left click on the Advanced tab
Left click on New Driver
When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
Select HP as the Manufacturer on the left
Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
After selecting Deskjet 9800 hit next to complete the New Driver Wizard
Under the Printer Properties window select 'Apply' but don't hit OK
Select the General tab
Rename your printer back to HP Deskjet 1000
Hit OK
Lastly, right click on your Deskjet 1000 one more time and left click on Printing Preferences
Left click on the Paper/Quality tab
Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
Click Apply and OK
Now that the new driver is added in, please test printing in colour again.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters

I am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters

Start up in safe mode
http://support.apple.com/kb/PH4373   <<< click here.
Restore your computer’s software
http://support.apple.com/kb/PH3840   <<< click here.
http://www.apple.com/buy/locator/   <<< click here.

HT4356 unable to print from my ipad mini

unable to print from ipad1 or ipad mini. tried all suggestions in support. This problem has been highlighted before is there a a problem with an software upgrade. I have hp 5510 that works fine fromPC.

I rebooted my BT router, Switched printer off and on, Checked printer on same wifi as router. closed ipad wifi to forget this network and reselected.
Printer worked OK on my ipad1 up until a few months ago it has never worked on my new ipad mini. works from my PC.

How do I use air print, after updating to 7.0 on iPad am unable to print. Pretty fed up with apples tricks

Unable to print to hp printer AirPrint after update to 7.0. 7.1

AirPrint Setup and Troubleshooting
http://www.apple.com/support/ipad/assistant/airprint/
How to print from your new iPad using AirPrint
http://www.imore.com/print-ipad-airprint
AirPrint Basics
http://support.apple.com/kb/ht4356
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Unable to print from HP Deskjet 1510

Scan and photocopy are working fine.HP print and scan doctor shows everthing is fine but I am unable to print test document.

Hi deepakgupta, Please try the following: Uninstall the software. Uninstalling the Printer Software.Unplug the USB printer cable.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the Full Feature Software And Drivers. (Wait for the software to tell you to plug in the USB printer cable.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

HP Officejet Pro 8610 - Unable to print windows 8.1

Hi ,
I've recently purchased HP Officejet Pro 8610 and unable to print from windows.
I am running 64bit Windows 8.1
I can print from Web via email
I can print using the HP AiO Remote app in windows. This doesnt have full functionality and is also inconvenient if I am working on documents and I want to print.
I have tried the following:
- Uninstalling and reinstalling from CD provided with printer
- Using the HP printer troubleshooter assistant, no success
- Downloading the software direct from HP website
- Updating the firmware using OJP8610_R1416A.exe
-Changing the port to the network port (in this case it is 192.168.0.200, it responds to a ping, also set the printer to have a static ip)
This is the error message that i get when i try to print a test page when i choose printer properties in the control panel
"test page failed to print. would you like to view the printer troubleshooter for assistance"
I have trawlled through other member's issues and i cant seem to find a fix for myself
Please help
Appreciation in advanced

Hi @binhdai & @JFB2014
I would like to help you both the best I can, and I appreciate the troubleshooting efforts you have both made up to this point. Please try the steps below and let me know the outcome;
1. Uninstall the software - Uninstalling the Printer Software Instructions.
2. Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
3. Type in "spool" and press Enter or select OK.
4. Select and open the Drivers folder, select the x64 folder if you have a 64-bit Operating System or the w32 x 86 if you have a 32-bit Operating System.
5. Open the 3 folder, locate the HPBXPSRENDER.DLL file and rename it into HPBXPSRENDER.OLD
6. Reinstall the printer; HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
Fingers crossed
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Unable to print multiple line items in Z-SAP SCRIPT

Hi ALL,
We have a scenario where in we are calling the Driver program (RFKORD50) for Document Extract(F.64), Where in we have attached the Z-Script to the program(RFKORD50),
Unable to print multiple items.
1) Checked with all the elements in STD program for printing multiple items in main window but unable to get all the items we are able to fetch only 1 item .
(&BSEG-BUZEI&,,     &BSEG-SGTXT&,,,,&BSEG-DMBTR&)
2) I have also tried with external subroutine but it also didnot work.it is fetching the latest value.
Ex: if we have 3 items say 1,2,3 first 2 items are not getting fetched it is taking 3rd item and printing it straight away(Problem is it is not going to script for fetching the first item).
see the perform which i have used
/: PERFORM ITEMS IN PROGRAM ZTFI_ZNV20296
/:USING &BSEG-BUKRS&
/:USING &BKPF-BELNR&
/:USING &BSEG-GJAHR&
/:CHANGING &V_BUZEI&
/:CHANGING &V_SGTXT&
/:CHANGING &V_DMBTR&
/: ENDPERFORM
IL &V_BUZEI&,,     &V_SGTXT&,,,,&V_DMBTR&
Please suggest me whetther we can call write_form from external subroutine. or is there any loop commands in SAP SCRIPT Form.
Regards,
Jana

Hi!
The LOOP is always within the printer program. In this case also.
Just check out the RFKORI35 include, the LOOP begins in the 215th line (in 4.6C).
SORT HBSEG BY BUKRS SORTP1 SORTP2 SORTP3 SORTP4 SORTP5
                      BELNR GJAHR BUZEI.
        LOOP AT HBSEG.
*         WHERE BUKRS = SAVE_BUKRS.
          SAVE_BUKRS = HBSEG-BUKRS.
          IF ( HBSEG-KUNNR = SAVE_KUNNR
          AND   NOT SAVE_KUNNR IS INITIAL )
          OR ( HBSEG-LIFNR = SAVE_LIFNR
          AND   NOT SAVE_LIFNR IS INITIAL ).
            CLEAR RF140-ELEMENT.
            RF140-ELEMENT = '521'.
            CALL FUNCTION 'WRITE_FORM'
                     EXPORTING WINDOW    = 'MAIN'
                                ELEMENT   = '521'
                     EXCEPTIONS WINDOW    = 1
                                ELEMENT   = 2.
You might try out to write your code within the 521 elemnt in the sapscript.
Regards
Tamás
Edited by: Tamás Nyisztor on Jun 12, 2008 3:34 PM

I am unable to print color photos from i photo using a Brother Printer

I am unable to print color photos from i photo using a Brother MFC-6490CW all in one. The photos appear to be in grayscale. I have checked the printer settings, but for some reason I am not able to access the color management on my printer from printer set up. It only gives me the standard option. I have spent hours checking Bother's website and Apple's and I am not able to come up with a valid answer. I know that the color print works. If I print something from the internet of from outlook it will print in color. I know all of my cartridges are in working order, I have cleaned the print head on my Brother, but I am still not able to print photos in color!!!
What puzzles me the most is why I am unable to really access the color management menu on my printer? It just does not come up. I have the option from paper handling to print photos, but this has nothing to do with the quality. I have also tried printing the photo from an Adobe PDF file and I still have the same problem. Can anyone point me in the right direction? Thank you.

In the Print dialogue box click on the little triangle to the right of the name of the printer. That will expand the dialogue box.

PDF: Unable to print a document as PDF from APEX when using the BI Publishe

Hi,
From an APEX application, I am unable to print a document in a PDF format when using the Oracle BI Publisher.\
Here is the configuration:
1) Server A is W2K3 and hosts the Oracle BI Publisher server, with IP address ip01.
2) Server B is a OEL5.2 and hosts the database server of the APEX application, with IP address ip02.
3) Machine C is a W7 desktop from which through an URL both the APEX applicationn and the BI server are accessed, with IP address ip03.
4) The APEX application is configured with the following to use the Oracle BI Publisher:
- Printer server: Advanced (requires Oracle BI Publisher)
- Printer server protocol: HTTP
- Printer server host address: ip01
- Printer server port: 9704
- Printer server script: /xmlpserver/convert
- Network services are enabled (at least I did get any warning/error message)
From C, I access the the APEX application through its URL, if I try to download a page by selecting PDF in the download section of the interative report section for that page, I am unable to open if and get the error:
<file>. pdf file can not be opened because the file type is not supported or because it is damaged (because, for example as an e-mail attachment is not sent and correctly decoded)
Yet, still from C, I am able to open any other PDF document.
The same way, still from C, acessing the APEX application through its URL, I have a query report defined with a PDF output format. Then, when I test the report (Test Report in the Report query) for that query, I get the error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
At first sight this could be a wong entry in the priinter configuration for APEX. But with this address, through the URL I can log in to the Oracle BI Publisher server.
Does someone has an idea what the problem could be?
Thanks for any tips.

How are you trying to print to pdf?
Don't go via PostScript or Acrobat Distiller, which are old deprecated technology.
You use:
Menu > File > Print > PDF (button bottom left) > Save as PDF…
Peter

Unable to print xml publisher report in excel format in R12

Hi All,
We are unable to print xml publisher report in excel format in R12. We were able to see the excel output but it's printing junk characters while printing and it's printing without any issue with PDF format.
Please let me know how to fix this issue.
Thanks,
Raja

Hi Raja,
I presume you have gone through the debugging process of testing your template locally first to get the expected result.....
If yes, this note might probably be helpful "Changing Output Format to RTF or Excel in XML Publisher Request Does Not Display Output Correctly (Doc ID 404512.1)"
Good Luck,
Lamine Balde

Unable to print the report after SP2 (CR 2008 / VS 2008)?

I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

Hi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

Unable to print hp office jet 8500A plus to i mac

Cannot get printer to print wirelessly from imac. Printer is HP officejet 8500A plus and o/s is Mavericks (10.9.3). Everything looks normal on imac but printer does not print when commanded.

Hello wrussellfromny,
Thanks for using Apple Support Communities.
The following support article has steps for you to go through in order to resolve this issue of being unable to print from your iMac:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Take care,
Alex H.

I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

Hi bengaunt ,
Thank you for posting on the Adobe forums, you can try printing as an image.
Open the file>Print>advanced>check the box "print as an image" OK
Thanks,
Vikrantt Singh

Unable to print Complete ALV report

Hi All,
I have made an Object Oriented ALV report .
When I try to print the ALV output I get a warning message "Unable to print last 25 records ."
Any suggestions to remove that message !
Regards,
Mukul Sharma.

This could be an Formscentral issue, the expected behavior is when you click "generate summary report" button, if the form has no responses, it will show "your form has no responses." UI with Test Form button. if the form has at least one response, the report should be generated for you.
One of such templates is "Training Feedback", "generate summary report" button is on Summary Report tab since this template only have plain text field and an data field.
Would you mind share your form with me([email protected]) if you don't see upon "expected" behavior.
Thanks,
Pengpeng Sun

I am unable to print to my hp deskjet 1000

Similar Messages

Maybe you are looking for