I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !!
I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !! I have tried to uninstall but get the sme error message. I have used 3rd party software to uninstal but still have no joy. My pc is running Vista.
Can you anyone offer a working solution ?
Many thanks.
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled
Similar Messages
-
I have an error installing itunes : the installer has insufficient privilidges to modify this file C:\program files\itunes \ipod updater\ext.dlll? what to do?
iPhone - not enough access privileges: Apple Support Communities
ITunes Access Privileges Error?!?!: Apple Support Communities
The installer has insufficient ...: Apple Support Communities -
When installing iTunes the installer tries to put it in the wrong drive
When installing iTunes the installer tries to put iTunes in a network drive instead of the "C" drive.
Yes, I thought it would do that too, but it keeps coming back with a drive error for a network drive that I am not connected to and don't want it there.
-
After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
i am trying to find jag meltdown the 2 part to the end of jag and beginning of ncis I can not find anything even wiki would like to download the episode can not find on itunes if possible otherwise is harem found guilty?
i am trying to find jag meltdown the 2 part to the end of jag and beginning of ncis I can not find anything even wiki would like to download the episode can not find on itunes if possible otherwise is harem found guilty?
-
I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?
Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen -
In OS X Mountain Lion Messages, after receiving a picture in a text, when I click to enlarge the photo for viewing and then close that window and go back to texting, the photo is gone from the text.
In OS X Mountain Lion Messages, after receiving a picture in a text, when I click to enlarge the photo for viewing and then close that window and go back to texting, the photo is gone from the text.
-
my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?
Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck. -
Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.
The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)
-
after purchasing the 9.99 plan and you decide that you do not want to use it anymore, do you use loose your photos? Are you able to save them your hard drive and such?
But all the adjustments that you apply in Lightroom, if you do not export to a rasterized format, will be inaccessible. You'll still have your catalog file, for if you want to re-inlist in the future, but it won't do anything for you without Lightroom. The same thing will go for Photoshop files like PSD, but obviously if you save to standard image formats you'll be fine.
It's one of the issues that keeps me away from the plan. Not being able to edit individual files in PS is one thing, but Lightroom is a photo organization system. I don't want to rent the system I use to organize 10s of thousands of files. -
Seriously no idea whats going on, and I'm usually pretty good with figuring an issue
Heres the isse:
When updating iTunes, after the restart I booted up iTunes and it crashed. I was prompted with iTunes had been updated incorrectly and to uninstall and reinstall iTunes. After downloading the installer from itunes.ca. I opened up the application, and clicked Next. Under the directory it says M Drive, I dont have an M drive at all, I click change and a prompt pops that says, "The volume M:/ is currently unavailable. Please select another." with "ok" being the only selection.
After hitting ok, it says "itunes installer completed" "Errors occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click Finish to exit the installer." Finish is the only selectable, and upon restarting the installer the same thing happens. I hope theres someone who can help me out with this.Hello Fix88,
Thank you for the details of the issue you are experiencing with installing iTunes. I found a couple of resources that I think will help with this.
I recommend reviewing the following articles:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
When uninstalling iTunes, it is important to remove iTunes and all related components in the order listed.
Thank you for using Apple Support Communities.
Best,
Sheila M. -
ITunes tries to start up and then "unexpectedly quits" before it opens
This just started happening out of the blue. I tried to open iTunes and it looks like it's starting up and then tells me it has unexpectedly quit and I get the following report:
Process: iTunes [353]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-9022501~2
Code Type: PPC (Native)
Parent Process: launchd [75]
Interval Since Last Report: 6466 sec
Crashes Since Last Report: 5
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 6
Date/Time: 2010-01-19 09:11:41.984 -0800
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 618BA05D-4161-4A15-ACF9-EFEF0277C9DF
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _ZN3JSC8JSObject17putWithAttributesEPNS_9ExecStateERKNS_10IdentifierENS_7JSValue EjbRNS15PutPropertySlotE
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
Any help would be appreciated. Thanks!Welcome to the Apple discussions.
This Apple article might help: http://docs.info.apple.com/article.html?artnum=300552 -
IPod Touch.
I can not access the internet thru Safari or a link on an email. I also can not access my contacts.Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
No data is lost due to a reset.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
How can I turn off the option in my message settings so that others can't tell that I have read there message I have an iphone4 updated to the 6ios
Set Settings->Messages->Send Read Receipts to Off.
-
Who is the imbecile that is in charged of Firefox 5, who created it incompatible with Google's toolbar . I have over 50 bookmarks t I can not access. How do I get the old Firefox toolbar that is compatible with Google's toolbar.
Who is the imbecile that is in charged of Firefox 5, who created it incompatible with Google's toolbar . I have over 50 bookmarks t I can not access. How do I get the old Firefox toolbar that is compatible with Google's toolbar.
Maybe you are looking for
-
Iphone 5 bluetooth texting is not working in my Mercedes E550; Mercedes says it's a phone issue. Any ideas or suggestions?
-
S12 Nano locks up and ignores mouse/keyboard
I'm experiencing frequent lockups, where the system ignores mouse clicks and keyboard input. The mouse (external usb or trackpad) will continue to move, but clicks and taps are ignored. The windows key still works, and the system responds to ctrl-a
-
Setting security context in sql*plus session
Hi, For a SQL*Plus session under an account that doesn't have execute privileges on fnd_global, is there any way to set the application security context similar to the way fnd_global.apps_initialize does? For example, as APPS one can do this: <br> sq
-
Hi, I would like to use Flex 2 to build a system that need to handle large dataset, such as a CRM system with more than 1000 customers. Because I'm not familar with ColdFusion, Java and FDS, I using AMFPHP to retrieve the data from DB. Since AMFPHP d
-
How do I get my Ipod onto my wireless network
My Ipad touch 2 can find my wireless network but since I updated Itunes and the Ipad software, I cannot get on my home wireless network. The page which shows the IP address, the subnet, etc. is blank. Any suggestions before I spend money to have Ap