I am unable to record using vista

I used to be able to use the recording icon on my Creative Media Source Organizer for my Zen V Plus. But now after I installed it on my vista, I am unable to use it. Each time I click on the record icon it says "The selected recording device cannot be used." It will not let me Select Recording source either. And when I click on the Enable Monitor icon as well it gives me the same warning.
I would like to know if it is my Organizer or my Vista which is causing this problem.
Once before my vista forced me to download a free licsence in order to play a song I had on a burned CD.
The song was from a CD I owned like all the other songs.. But for some reason my Vista made me go through all that trouble even though on my other computer I didnt need to. I don't know if that has anything to do with this situation but I thought it might help.
And I'm hoping that some people here would be able to help me as awell
Thank You.

I used to be able to use the recording icon on my Creative Media Source Organizer for my Zen V Plus. But now after I installed it on my vista, I am unable to use it. Each time I click on the record icon it says "The selected recording device cannot be used." It will not let me Select Recording source either. And when I click on the Enable Monitor icon as well it gives me the same warning.
Try to change the recording source
Select Control Panel, and then Hardware and Sound.
Click on the Recording tab.
Select the recording source for example, Line In 2/Mic 2, and then click Set Default. Recording device will be marked with a green tick mark.
Message Edited by Rad-Wulf on 03-26-2008 09:42 AM

Similar Messages

  • Unable to download using Vista; FF goes to run or save; I've selected both; download goes thru "downloading" and then disappears; can't find anywhere; have tried this many, many times on two identical computer setups.

    Have tried many times to download both Firefox and Thunderbird on two 2-year old, rarely used, identical computers, both using Vista. (I downloaded both successfully on an old computer using XP.) The program goes thru the downloading process; alternately I've told it to "run", "save", "save to desktop", "save to my documents folder on desktop." It disappears when through downloading. I've checked in these folders plus temporary folder as found through "tools/internet options. I've tried to find these downloads by using "run" and using every word I can think of to help find them (temporary folder/or User/my name/firefox 3.6.9.ext and others. Get the message can't be found. Any help sincerely appreciated. Thank you. Jim

    A: Why won't AirPort Utility find my Netgear Router?
    AirPort Utility works only with an Apple router, as does the utility for a Netgear work only with a Netgear router.
    B: Why won't AirPort utility find my AirPort Express?
    Any of 3-4 common reasons. We'll have to work on troubleshooting that.
    C: Why, on the two occasions the AP Utility did find the APE, did it not give me the option anywhere to set it up as an EXTENDER to the current network?
    Apple designed the wireless "extend" feature on their routers to only work with other Apple routers.
    D: Is there any other way to add the APE to my network as desired without using AP Utility?
    No
    Not sure how you want to proceed at this point. It might be possible to use the AirPort Express to extend the Netgear network if you connect it using a permanent, wired Ethernet cable connection back to the Netgear router.
    If you cannot run the Ethernet cable, your best bet by far is to use another Netgear extender or repeater, which would likely be compatible with your Netgear router.

  • I'm having trouble with Captivate CS4 the audio won't record (using Vista)

    Hello,
    Please help!!!...I've tried the patches outlined in prior question/answers regarding audio recording problems by replacing the nsaudio.dll files as suggested at http://blogs.adobe.com/captivate/2009/03/audio_play_back_and_usb_mic_is.html
    and used the SubInAcl Windows Registry Tool outlined at http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installation.html
    The issue seems to be resolved at first but inexplicably the audio recording stop working again.  
    I also noticed that I'm getting error messages regarding the following Captivate files.  NSAudio.dll , Ppsuplo.dll, avi2swf.dll, FullMotionrecorder.dll and WaveEditCtrl.ocx files
    What can I do to resolve the recording problems that seem to plague Captivate CS4.   Does Adobe offer any updates to their software to resolve well documented bugs.
    Thanks in advance for any help!

    Hi there
    Have you reported these to Adobe support?
    To answer your question:
    vismi wrote:
     ...Does Adobe offer any updates to their software to resolve well documented bugs. 
    The answer here is they certainly do. But updates are sometimes few and far between. And the likelihood of seein an update to address issues such as these is totally dependent on the number of reports Adobe receives about them.
    If you haven't, please consider submitting a Bug Report. That will only help increase any chance of seeing an update to fix things.
    Click here to visit the Wish Form/Bug Reporting Form
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Unable to connect wirelessly on an Acer laptop using Vista

    I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

    #1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
    #2 And check to be sure, if you use a WEP password of Hex or Ascii.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • BT Yahoo Toolbar - I am unable to get this to open, using Vista, however, have succesfully got it to show on my laptop with XP, using v3.6.8 of Firefox.

    I am using Mozilla Firefox v3.6.8 with XP on my laptop and Vista on my desk top. I was asked by BT Yahoo to download the new BT Yahoo Toolbar. This I achieved on my laptop with XP, but have been unable to get the toolbar to show on my desktop using Vista. The file downloads and fails to create the toolbar.

    Sheesh. That looks hard. I think it will fall over at this point:
    "Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
    Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
    With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
    I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

  • HT3204 unable to purchase music - keep getting error code 5002 on - using Vista

    Unable to purchase songs - keep getting error code 5002 - using Vista

    I am having the EXACT same problem. It started on June 16th also. I found out that code 5002 is supposedly a billing issue. The article directed me to edit my billing information (even though it was correct). I tried to submit the new information and was told my request could not be processed, try later. I have been trying for 3 days. Was in contact with customer service. first they said it was an Itunes Stores issue with the software. they told me it was resolved. Then they had me uninstall and then reinstall Itunes, which still didnt resolve it. I am starting to think its still an Itunes Store issue. Still trying to cintact customer service about this.

  • Camcorder video error: "Unable to record. Resolution not supported by memory card."

    We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
    Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem?  I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

    Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

  • Unable to boot to Vista after changing Mac OS partition size

    Greetings,
    After creating an additional Mac OS partition, I can't boot into Vista anymore. Any way to fix it without re-installing?
    I have an intel iMac running Leopard, and Vista on a bootcamp NTFS partition. That was working fine.
    I created a new partition on the drive (using space from my Leopard partition) and installed Tiger on it for a short project.  I’ve been dual booting between Leopard and Tiger just fine.
    However, now I’m unable to boot using the Vista partition.  I boot to a black screen with white text that states "No bootable device, hit any key" error. Of course hitting a key does nothing.
    I can boot into Leopard/Tiger just fine, and can see the Vista partition from Leopard and view the files as usual. However I just can't boot into Vista. I tried running the repair tool from the Vista install disk, but that doesn't work on the NTFS partition (I think it doesn't see a windows partition to fix). Disk utility from Leopard shows the vista partition as the right size and formatted as NTFS.
    I'm really stumped by the problem. Any help would be appreciated.
    Thanks!

    TestDisk - CGSecurity.
    TestDisk is a powerful free data recovery software! It was primarily designed to help recover lost partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally deleting a Partition Table). Partition table recovery using TestDisk is really easy.
    TestDisk can
    * Fix partition table, recover deleted partition
    * Recover FAT32 boot sector from its backup
    * Rebuild FAT12/FAT16/FAT32 boot sector
    * Fix FAT tables
    * Rebuild NTFS boot sector
    * Recover NTFS boot sector from its backup
    * Fix MFT using MFT mirror
    * Locate ext2/ext3 Backup SuperBlock
    # Mac partition map
    # NTFS ( Windows NT/2000/XP/2003/Vista/2008 )
    TestDisk has features for both novices and experts. For those who know little or nothing about data recovery techniques, TestDisk can be used to collect detailed information about a non-booting drive which can then be sent to a tech for further analysis. Those more familiar with such procedures should find TestDisk a handy tool in performing onsite recovery.
    http://www.cgsecurity.org/wiki/TestDisk
    Seeing you could lose everything, I would definitely use WinClone while in OS X to backup Vista, and CCC or SuperDuper to backup your OS X volumes (or Apple DU Restore, just be sure to turn off "Ignore Ownership" and repair permissions afterward, and then rerun 10.5.2 if possible).
    http://www.twocanoes.com/forums/

  • Unable to record on my Thin Client on WMS 2012.

    I really need help here, I have up to 65 thin clients and 4 vm running WMS 2012 on WS 2008 R2 and they are all licensed. The issue is this, on the clients, i am unable to record. Its not detecting the Headphones mic, but it could speak out with the headphone-speaker
    and i am confused right now. I need help. May God bless every one reading and replying this to help me solve this issue.Amen.Thanks

    Hi Philippe,
    I really appreciate your effort. I don't understand the gear in your response saying with certified driver and such and using the same gear with a windows laptop/com... to rule out the thin client firmware, Please can you  explain a little bit with
    basics. For the firmware update i will try it in one of it. Thanks, will be expecting a feedback from you and anyone else can also comment. I want to be sure of the firmware thin before making any changes because when doing any firmware upgrade/update, someone
    needs to be careful.
    Regards,
    Kunle.

  • Going to the next record using Iterators. Please HELP

    No offence meant for asking again as this is URGENT.
    I am unable to go to the next record.
    I need to go to the next record using the RowsetIteratorTag.
    But am getting the null pointer exception.
    Please can anyone tell me the way to go to the next record.
    I AM USING THE NEXT(),BUT STILL NO LUCK
    public class CheckDetailRowsIterate extends TagSupport
         public int doStartTag() throws JspException
           Row currentRow = null;
           Row nextRow = null;
           String m_CmpyCode;
           // Find the current row and get Data out of it.
           RowsetIterateTag detailIterator = (RowsetIterateTag)TagSupport.findAncestorWithClass(this, RowsetIterateTag.class);
           if (detailIterator != null)
              currentRow = detailIterator.getRow();
           else
               // No row iterator
               log.logDebug(ClassName,"","No CURRENT ROW Found : ");
           if(currentRow != null)
             String[] attrNames = currentRow.getAttributeNames();
             Object[] obj = currentRow.getAttributeValues();
             // Get the attribute Values
             m_CmpyCode = obj[currentRow.getAttributeIndexOf("CmpyCode")].toString();
            /* Now,move to the next Row.GIVES NULL POINTER EXCEPTION.
            RowSet rowSet = new IT().getRowSet();
            nextRow = rowSet.next();
            m_CmpyCode = obj[nextRow.getAttributeIndexOf("CmpyCode")].toString();
            log.logDebug(ClassName,"","NEXT ROW Values ARE "     + m_CmpyCode );
            rowSet = null;
            return Tag.SKIP_BODY;
         public class IT extends RowsetIterateTag
                 RowSet getRowSet()
                      return rs;
    }  // End class.

    You cannot look for a duplicate record situation using a timer. When you issue the Raise Form_trigger_failure from the when-timer-expired trigger, all it does is stops that trigger. The when-validate trigger has already run and completed with success, before the when-timer-expired trigger even started.
    You must do the checking and raise form_trigger_failure at the same time from the When-validate-record trigger.
    In fact, you don't even need to Post; first. In the WVR trigger, just do this:
    If :System.Record_Status = 'INSERT', then do the select.
    Then, if v_counter >= 1, issue the message and Raise Form_Trigger_Failure;

  • Home nework using Vista and Windows 7 problem

    I have a netbook using window 7 and unable to connect to my home network using Vista. setting it up using bthelp to connect both but I  am unable to doso  as the screen resulution is not correct. for BT help. the netbook is Asus emachine 10inch version. it is 1024 X 600.
    my Vista computer does show up the netbook but I am unable to access files even after enabling filesharing and checking firewalls etc.
    Windows 7 will only let me set up a homenetwork with other windows7
    Vista homenetwork shows I am connected but no information.
    anyone any ideas as to what I could do?

    It's probably because your netbook is running the "Starter version" of Windows 7
    http://windowsteamblog.com/windows/b/windows7/archive/2009/05/29/let-s-talk-about-windows-7-starter....
    Sorry, I'm a bit pee'ed off at the minute. I just wrote an informative piece about the history of netbooks and accidently navigated away from this page whilst searching for a link for you.
    Clicking back returned me here with all my write up....." Gone"
    Bah!
    oh well. The starter version of windows 7 iirc doesn't have the capability of home network file sharing.
    An MSCE in computing is like having a McDonalds Certification in World Cuisine, pointless.

  • HT4437 HELP, i can use airplay on photos and videos that i have recorded using my iphone 5 but i cannot stream music????

    For some unknown reason I am able to airplay photos and video content that i have recorded using my iphone 5 but i am unable to airplay any music whats so ever??
    there is not connection problems and as far as i cant tell all the settings are good?? (or photos wouldnt airplay?, right??)
    This is driving me insane, a friend of mine has an iphone 4s and is able to stream music but my far superior iphone 5 cant!!!!! this isnt right surely???

    How to use iTransfer
    1. Launch iTransfer on both devices
    2. Tap "Tap to Connect" on both devices
    3. Select the device to pair and wait for device to connect
    4. Tap "Accept" on the other device
    5. Select Photos, Music or Files to transfer
    6. Tap "Received File"
    7. Select the received file and decide what action you'll like to take e.g. View, Email, Open In

  • Unable to record Windows Explorer

    I am creating my first ever project in Adobe Captivate 3. Is there a know issue with not being able to record anything within Windows Explorer or is it something that I am doing wrong?
    Anyone know how to get round this?

    Hi there
    When you say "unable to record" that may mean several things.
    Are you expecting Captivate to automatically record and it isn't?
    Is Captivate listing any sort of error?
    What exactly is happening?
    Captivate does an amazing job with what it does. But in some cases it is unable to sense things. For example, you may be using Windows Explorer, but what is being presented that you are trying to record? Maybe Captivate just doesn't understand it.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Unable to record voicemail message, no action when red button pressed

    Have used Skype for years but now about to give it up as unable to record voicemail greeting or receive voicemails consistently.  I have received one voicemail from aobut 30 calls.  I am unable to understand or replicate what went right in the successful exception.  I go to Mac > Skyp > Preferences > Calls Set up voicemail.  It's set up.  I got to record with red button.  It's clickable but no recording occurs and nothing to play back.  Sound preferences are set to use internal iMac mike to record.   I'm at divine unknowing.  Anyone have useful experience or ideas?  

    Hi, Did you call 'Echo/Sound Test Service' for ensuring that your audio settings are configured correctly for Skype ? Here's == how to set up a personal voice message. == Hth

  • Cannot Delete CPTL file from Desktop using Vista

    Hi All,
    I cannot Delete CPTL file from Desktop using Vista. Explorer
    crashes. It is a Captivate 2 file.
    I have tried (with no luck):
    - logging in as a different user and deleting the file.
    - running explorer as an Administrator
    - uninstalling Captivate.
    Anyone got any ideas?
    Cheers,
    Raef

    Hi Raef,
    That is a strange issue. Here are a couple more ideas you
    could try:
    - Have you tried renaming the file (including suffix)?
    - Have you rebooted?
    - Do you get any error messages when trying to delete, such
    as "Acess Denied"?
    - Is your machine networked? Is it possible someone else has
    the file open?
    - Can the file be moved to another location or put in a
    folder (and then deleted)?
    - Have you tried using the Command Prompt / DOS mode to
    delete the file?
    It sounds like it could be a Vista issue so I would look at
    the Microsoft Vista forums too. Sorry I do not have an exact
    answer.
    IHTH,
    Aaron

Maybe you are looking for