I am unable to reset my iphone

I am unable to reset my iphone

This is a reset... press the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Is that what you are trying to do?

Similar Messages

  • My screen is not working how can i reset my iphone 3gs

    I M UNABLE TO RESET MY IPHONE COZ SCREEN IS NOT RESPONDING, AND I HAVE TO RESET IT CAN ANY 1 TELL ME D WAY

    Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • I want to reset my iphone 4 setting but i forget my password

    hi
    I'm unable to reset my iphone 4 factory setting because i forget my password.

    Hey chanduu,
    Thanks for the question. Are you referring to the Restrictions passcode of your iPhone or the passcode lock? If it is the latter, see this resource:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been usingiCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix))

    my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix)

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • HT5569 I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

    I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

    Thanks for the responses, they have been very illuminating!
    This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
    I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
    I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

  • Unable to start my iPhone after resetting/erasing all content.

    I have iPhone 3GS 16GB. I got a problem. I have reset my iphone i.e. want to restore to factory setting so when i have selected :Home screen/settings/general/reset/erase all content and settings, my phone got off and after that its not restarting now. Even i have connected to itunes but its not being started so pls guide to restart again so that i can start using my phone once again.

    Charge up your phone and try to see if it get's past the Apple logo. If it does not try to reset the device.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If this doesn't work, then try to turn the phone off.
    Restoring the device may be your only option at this point, you will lose any data not already backed up.
    Press and hold the home button and plug it into your computer with iTunes open. Keep holding that Home button until you see the "Connect to iTunes" screen, the iTunes logo and USB cable.
    Then iTunes should tell you that it has detected an iPhone in Recovery Mode and needs to be restored.
    Those steps are also in this article with pictures!
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808

  • Unable to reset  IPHONE UNKNOWN ERROR HAPPENED 40

    Unable to reset iphone .
    UNKNOWN ERROR HAPPENED ( 40 )

    try this...
    Thank you for your responses guys!
    This is how I managed to fix the problem...and I hope this helps others in the similar situation.
    I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
    I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
    I hope this will help others who are having problems to burn stuff on iTunes. I can give more info if you need it.

  • HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

    I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

    Hello anacc,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    Best of luck,
    Mario

  • How do i reset my Iphone 4 password without restoring to default?

    Recently I've been having problems with my roommates watching me enter my password which forced me to change it periodically.
    Only now I can't remember what I changed it to most recently and restoring it to factory settings isn't really an option considering the volume of the content on the device.
    I've been without access to my phone for the past week and it's getting almost aggravating having to call and talk to some lady about the issue I'm having, having her sound very empathetic and saying they could "assist me in resolving this today", only to have her say that I'd need to pay $30 just to have her tell me a few words.
    I don't have $30 right now and I think it's beyond stupid that they're 'unable to help' me because of this.
    In the Backups section of the Apple site I read:
    " If you protect your iPhone or iPod touch with a passcode, you will be prompted to enter the passcode when you connect to iTunes. Once you successfully enter the passcode, iTunes will recognize that device as authorized and you will not need your passcode to back up or sync (Which I've done). When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode.) iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups. "
    I've just tried restoring from a backup I created last week but my password is still enabled and I'm still unable to remember what I changed it to.
    I'm not sure if I misunderstood the bolded section but I was under the impression that restoring it from iOS 4 or later would remove/reset my current password and allow me to set a new one. That hasn't been the case.
    I'm not really sure where to go from here, so any and all help is appreciated.
    Thanks,
    Mjk

    How do i reset my Iphone 4 password without restoring to default?
    If you don't remember it, you can't.

  • I deleted my old email address and now I can't acess icloud because I can't remember my password to the icloud account.  It is not allowing me to log in obviously and now my old email is showing under the settings now do i need to reset the iphone?

    I deleted my old email account and when i went to change everything on my iphone it still shows the old email even though i created a new apple id.  I also can't remember the password and now can't access icloud.  Do i need to reset the phone?

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Unable to sync my iPhone with iTunes all of a sudden...

    I'm presently unable to sync my iPhone with iTunes for some odd reason. It says "Syncing is disabled on this computer." I checked the iTunes settings and it said under "Syncing" in the preferences that it was in fact enabled so I don't see why all of a sudden I'm having these problems. Any suggestions?

    I first reset the sync services in the (Applicantions - Utilities) Terminal: killall SyncServer syncuid SystemUIServer
    Then I went to *User/Library/Application Support and dragged the SyncServices folder to the Trash.
    Then I logged out from the Apple Menu.
    Then I logged back in.
    Now all of the syncing services are working correctly.

  • I was resetting my Iphone 4 at itunes it locked and now blinks on and off logo what do I do to reset it?

    I was resetting my iphone 4 at itunes and it locked and now blinks on and off the logo and will not allow me to reset it.
    What do I do now to reset it.

    Try to connect in recovery mode and restore again, explained here:
    iOS: Unable to update or restore

  • I lost my keycode and can`t reset my iphone 4

    please, i can not reset my iphone because i  lost the key code

    If you have forgotten your lockscreen password, connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
    iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

  • HT5654 I had an PC crash while backing-up my iPhone4, before installing iOs7. Now I am unable to restore the iPhone. Can anyone please help me! Arjen Ronhaar

    I had an PC crash while backing-up my iPhone4, before installing iOs7.
    Now I am unable to restore the iPhone.
    Can anyone please help me!
    Arjen Ronhaar

    Hey Arjen Ronhaar,
    Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls

    Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts using the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls tab. Has anyone a fix for this problem? If you want to try it out, do the following?
    Dial a number from your iPhone Keypad. After cutting the call, try to save the number you just dialled to your contacts by choosing the new contact option. You will see that you will not be able to key in the name of your new contact.

    Works fine for me.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Maybe you are looking for

  • Is there any way to print directly from InDesign CS3 to Mavericks 10.9.4?

    Are there any fixes or workarounds that allow me to print directly from InDesign CS3 to Mavericks 10.9.4. Everything I try now causes InDesign to freeze if I attempt to print. The only way is to export the file as a PDF. Thank you.

  • IC Webclient - Changing values in Text Type -Log in view IRecReason.htm

    Hi, I m working on IRecReason.htm view, in the right hand side corner there is a place to add comments, the field is named as text types. All comments are then stored & visible in the Field named as "LOG" which is also one of the valus in the drop do

  • Is Logic priced too low?

    In 2006, for me, Logic was a huge, $1,000 program. The interface was overwhelming and I thought the name was ironic, since nothing about it seemed 'Logical'. So I bought the Apple book and read it front to back. That turned out to be like a quick-sta

  • Stops working when  "Starting up panels..."

    Just bought Adobe Creative Suite 5.5 Design Standard.  InDesign refuses to load.  I get the error message: Adobe InDesign CS5.5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you

  • Renders fine in DW8, not CS3

    Ok, I've got a site where the pages rendered fine in the design view in DW8, but with CS3 the navbar on the left shows shifted to the right. Renders fine in browsers too. That said, I certainly wouldn't rule out that I've done something that's not qu