I am unable to run flash files, I get an AIR error.

I get this Adobe AIR error: " This installation of this application is damaged. Try re-installing or contacting the publisher for assistance." I have reistalled AIR 3.3 and still am unable to run flash files.

Shah Shah wrote:
The idea is once my iPhone is paired with the MBP via bluetooth...
No it's not. Read the description of the application:
"Bluetooth: Tokenlock can monitor any Bluetooth device to check if it is removed from range, such as your cellphone or a headset. Token lock checks periodically based on a schedule you choose to see if the Bluetooth device can still be seen. You can set different schedules based on whether or not your computer is plugged into power or is simply on battery to conserve battery power. The device does not have to be paired with your computer, allowing you to use just about any Bluetooth device - not just those that the computer supports."

Similar Messages

Unable to run batch files in my EP server

Hi,
I'am unable to run batch files(go.bat and configtool.bat) on my EP server.Anbody please give me a solution.
With Regards
Pradeep.B

If your EP Server is on non-windows based environment then you cannot use go.bat & configtool.bat or else you can. If you are trying to execute these on unix based machines then you have to use go.sh & configtool.sh files.
Pradeep

Unable to run batch file through BO XI 3.1 server

IHi,
I am unable to run batch file (.bat) from BO XI CMC. the batch file is running fine through command prompt but fails at server. Error msg is "Running this type of program is disabled by your administrator".
Can you help?
Thanks in advance,
Avijit

Have your administrator enabled the running of that type of program in the CMC?
Sincerely,
Ted Ueda

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

>tutorial on learning PE
Here are some links I've saved
Saving & Sharing http://forums.adobe.com/thread/1051093
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive
-the page also has links to help pages for previous versions

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

When i run my program, i get the following Error:

" Error 7 occoured at Open File+.vipen File.
Possible reasons:
Labview: File not Found .
or
NI-488: Non-existent board.
Please Help?

In my experience it usually happens when one of my sub VIs is trying to open
a file and can't find it. (We don't use the NI-488 boards, so for us, the
error is due to a problem opening a file. If you are using GPIB boards, the
problem might be due to a missing GPIB board.)
Hope this helps.
Jim
matrix wrote in message
news:[email protected]..
> When i run my program, i get the following Error:
> " Error 7 occoured at Open File+.vipen File.
> Possible reasons:
> Labview: File not Found .
> or
> NI-488: Non-existent board.
> Please Help?
>
>

HT203176 i have a slow macbook, i ran live disk utilities and said I need to repair disk from a cd. did that, I got volume repaired from the external disk. when I reboot from hdd, then run disk utility, I get the same error message i did b4 repair

i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great!
When I reboot from hdd, then run disk utility, I get the same error message i did b4 repair. I went thru two rounds of this.....
Can anyone help? thanks

Sorry guys, I don't see how to reply to you so I use reply to "me" basically.
So the error I get is "volume header needs minor repair" and then you need to perform repair from the installation disk message.
I did repair not verify from the disk twice. Every time ending in the "the volume had ha been successfully repaired". Then I reboot from the internal disk. Run disk utilities from it, do verify and get the same error message I got before repair. I hope this can shed some light fr you guys. Sorry I didn't include details in the original
MEssage.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

When I try to unzip the files I get the following error msg "checksum error in adbeapecore.dll"

when I try to unzip the files I get the following error msg "checksum error in adbeapecore.dll"

Hi,
We are tracking this issue at:
http://forums.adobe.com/message/4286522#4286522
Please follow the steps and update thread if your issue is resolved.
Regards,
Ashutosh

Ever since i "upgraded" to yosemite i can't run illustrator (i'm getting a plugin error "Photoshopimport.aip" and "PhotoshopExport.aip" message... i've tried to get support (no longer available for cs4 design premium!!!... i've uninstalled and reinstalled

ever since i "upgraded" to yosemite i can't run illustrator (i'm getting a plugin error "Photoshopimport.aip" and "PhotoshopExport.aip" message... i've tried to get support (no longer available for cs4 design premium!!!... i've uninstalled and reinstalled... the problem persists... can anyone at adobe provide guidance, orientation, help?... thank you kindly,
bob kincey
[email protected]
[email protected]

Some people have reported success with opening Photoshop before opening AI. Some how the aips are registered there and are then available to work in AI.

When I am trying to export or render Mxf files I get an unknown error. Help!

Hi everyone,
When I am done editing my videos I want to render them. But when I do and the videos are MXF files, I get an unknown error.
The same when I try to export.
I work on a windows laptop and have Premiere Pro CS 6.
Is there someone who can help me, please?

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too

Unable to run jar file without lib folder containing swing-layout-1.0.jar

I have done my project through NetBeans 5.0. Eventhough I have copied my lib foloder containing swing-layout-1.0.jar inside my project.jar, I am still unable to run my project.jar in other systems, it is creating an error as Could not find the main class. Program will exit. But if I copy the lib foloder containing swing-layout-1.0.jar in the same path as the project.jar, then my project.jar is running.
But I want to give only the project.jar for other users and not also lib foloder containing swing-layout-1.0.jar each time.
Could someone please help me with this.

When you develop GUI applications using the Netbeans you may endup using netbeans specific jar files in your auto generated code.
And when you build jar files with netbeans it copy the third party jar files used in a application in to a lib folder in the same directory as the jar file of your project. And then set a class path entry to those jar files in your project jar file's manifest file.
So if you want to redistribute the package you have to redistribute your jar file and every thing in the lib folder in with the same directory structure.
If you want to change the structure you will have to change the class path to suit the new structure.

Unable to open Flash file from 2009. Can I backsave a Flash file?

I have Flash files from 2009 and unable to open them in the current programs. Is there a way to backsave it?

Hello Rezun8 --
Here is a link to the Flash file: Dropbox - Flash_test_file_for_modules
Thanks for your help!

Running flash file from non-english folder

I am trying to run a flash movie located in a folder with non
english characters (japanse, chinese). (Using latest flash 9
player)
The movie does not play at all. Moving the movie to another
folder with english only characters works fine.
Also, it seems that this is something that has changed in the
latest version of flash.
Previous version of flash 9 seems to work correctly.
Any ideas?

Hi Jim.
Sorry, I thought I read that somewhere that a Flash file can preview your whole project before you Burn it.
Can you give me any insight on my other problem about the Code 25-Not Enogh Space on Disc Problem I'm having?
Also do you knkow of a good 3rd Party software I can use to burn ISO files if Encore cannot do it.
Thanks

I am unable to run flash files, I get an AIR error.

Similar Messages

Maybe you are looking for