I am unable to see business systems in ID
Hi Experts,
I have created Technical and business systems in SLD,
I have done mapping every thing working fine but when go to integration directory
i am unable assign business systems, i didn't find my busuiness systems in ID.
Can u please tell me where i have done wrong.
Thanks in addvance.
Manisha.
Hi Manisha,
There is a simple solution for this problem,
1. If you use the same business system to map more than one scenario U can't see the Business system in the ID directly.i.e., at assign business systems in ID.
2. Go to next tab which is Objects (ID) there you can see all the business systems which are using by XI server please do like this to get the business system.
3 select the business system which u want to work on- right click and select add to acenario(current ID scenario)
4. come out of that tab then u can see the business system added to the scenario. then rest is normal.
hope you understand
regards
praveen
Similar Messages
-
Cannot see business system in integration directory.
Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh -
SPROXSET ...Unable to rectify Business systems not found issue..
Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
TeresaCheck RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm -
Unable to Define Business System in SLD.
Hi All,
We configured SLD host on EPDEV system (EP System based on Only Web as Java).
We have diffrent system for PI. At the time of PI installation I mentioned SLD Host as EP system.
In PI am facing some problem while executing SLDCHECK, output as "No Business System defined for PI Technical system"
In EP SLD HOST, By using wizard I am trying to add PI as a technical system, In in first step, I selected Web as ABAP, after that next two steps its ok, In Installed product step, I added installed pucts and saved then it giving me error of "CIM_ERROR_ALREADY_EXISTS".
Then I canceled the wizard and came on main screen, I found two technical systems for PI SID as below.
1. PI Web as ABAP
2. PI Web as Java
I checked the installed products for both PI Technical Systems then I found,
1. PI Web as ABAP there is no installed product and when I tried to add new Installed product then itu2019s again showing the same CIM_ERROR.
2. PI Web as Java its showing all installed products for Java, so I am able to create business system for this technical system.
But I am unable to create busyness system for PI Web as ABAP system because no installed products in the list.
So can you please tell me how to resolve this problem. I tried to delete all PI technical systems and recreate ones again. It gets delete but at the time of recreation again the same CIM error I am getting.
Is this problem because of my EP is only based on Java??
Can I switch SLD HOST to my PI system as this is ABAP+JAVA? If possible its no big problem for me because its new implementation and only PI DEV and EP DEV two systems are there in this SLD group.
Please reply with your good experience skills.
Regards,
JaySo can you please tell me how to resolve this problem. I tried to delete all PI technical systems and recreate ones again. It gets delete but at the time of recreation again the same CIM error I am getting.
Is this problem because of my EP is only based on Java??
You need to import SLD with latest cimsap & cr content to reflect ABAP & JAva systems provided by SAP....
Can I switch SLD HOST to my PI system as this is ABAP+JAVA? If possible its no big problem for me because its new implementation and only PI DEV and EP DEV two systems are there in this SLD group.
You can have SLD on EP or XI.. Technically it donse't matter. But as PI relies heavily on SLD, i would recommend the SLD to be moved to PI & EP sytem pointing to PI-SLD..
How to repoint SLD... Check SLD Installation guides...
-Siva Maranani -
Unable to create Business System with role Integration Server
hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AMHi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus -
GB e-filing - can't see business systems
We are trying to implement GB e-filing using XI.
Our 4.6C R/3 system is shortly to be upgraded to ECC 6.0 so we are moving from Business Connector to XI.
The XI system is installed and appears to be running OK. It is the latest version with the latest patches.
We have a central SLD on our Solution Manager System (v 4.0)
The XI machine and our QA (upgraded to ECC 6) are in a landscape in the SLD.
We have got a good way through the e-filing document at
http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
but have got stuck at Stage 6 [A] 3. 2. which says
2. On the Tab Business System Services for A2A, use the F4 help and select the business system on which the SAP HR component 6.00 resides in your system landscape
We can't see any systems.
Any idea what needs to be done to see our ERP system?Hello Prakhar
Thanks for advice, really useful!
Can you please clarify where exactly I can create the Busines Transactions, such as Norman Correction?
I would like to create Normal Correction via SOLMAN_WORCENTER,so I navigated to Change Management > Common Tasks > New Request for Change (for instance)
After that I'm getting the list of various roles, such as:
Select a business role: AIC_MANAGER-AIC Manager
IC_AIC_AGENT-Accounting IC Agent
AUT-PM-Automotive Partner Manager
CASEWORKER-Case Worker (Social Services)
.....etc..
and I don't know which one to use.
Can I still use "old-fashioned" CRM transactions for this?
It all has been changed dramatically if you compare it with 7.0
Thanks,
123
Edited by: SOLMAN123 on Nov 23, 2011 7:11 PM -
Unable to assign Business System in Configuration
Hi,
I have created a new Technical system in SLD. I have also configured a Business system for it. But when i am trying to assign this system in Configuration, "Assign Business system", i am not able to see the newly created business system.
Please help me.
Regards,
Siva Maranani.We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind -
Unable to Export Business System
Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using pisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an error .I have the necessary authorisation
Kindly helpHi,
First, you have to start the SLD.
To transport business you must first of all create business system groups, then associate the business systems with the group and finally map your business systems.
To create a group, proceed as follows:
> Business Systems
> Click on the drop-down next to Group and select Edit Groups
> Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
To assign business systems to a group, proceed as follows:
> Business Systems (Group = all)
> Select your Business System
> Click on the Integration tab.
> Select the related Integration Server (which is associated with a group - see step 1)
To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
> Business Systems
> Select the group of your choice
> Select your Business System
> Click on Transport
> Click on Add/Change Target
> Select the Target Group and System
KR, Danny De Roovere -
Unable to see Business rule in Dev in 11.1.1.3?
Hello,
In Planning while editing the webform under business rules I could not see the business rules when im trying to assign them to a dataform in Dev but I could see only calc scripts. But I could see the business rules in Prod.
Anyone faced this issue then plz provide ur suggestions on this.
ThanksHave a look at the following doc in Oracle Support - "Have a look at Troubleshooting Hyperion Business Rules Issues (Doc ID 763345.1)"
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to see file system on touchpad over USB from Windows 7
When I plug in my HP touchpad running 3.0.4 via USB to my PC running Windows 7 the device appears in device manager, but I don't see a new drive appear with a given drive letter under my computer.
If I look at device manager in windows, I see two webos devices. One is under disks. The other is an unknown device with a question mark next to it.
If I look at the disk from the disk management interface, the disk appears, but doesn't seem to have a drive letter nor a filesystem on it.
If I plug the touchpad into an XP box, it wants to format the drive... which loses my apps.
What did I break? Any way of fixing this?
Thanks!
-- gyre ---
Post relates to: HP TouchPad (WiFi)Before you disconnect the cord from the PC, are you correctly choosing "Eject", or the incorrect "Safely Remove Hardware" from the tool tray?
I've heard the latter can cause confusion on a PC...
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
** Unable to see message interfaces in ID under Business Systems
Hi Friends,
When I create sender / receiver agreement in ID by choosing the respective Business Systems I am not able to see my message interfaces. Then, I checked the SLD, our SWCV under Products are not assigned in the Business Systems.
Then, I have assigned our SWCV (by selecting the product, be selecting the SWCV) in tehcnical system and business systems, saved and log off from SLD.
But, still those message interfaces are not appeared while select the Business systems. Those interfaces are abstract interfaces. I tried to close the IR and ID, open it again, still the same problem.
What could be the reason ? Reply friends,
Thanking you
Jegathees P.Hi,
a new import of the Business System is not necessary.
1) Important is to activate the interface in the Integration Repository.
2) Checking in SLD that all installed check boxes are selected. In the Business System -> Installed Software -> select the Product and check that the SC is selected.
In IR it's enough to close the Business System and reopen it to see the new interfaces.
Regards
Patrick -
Unable to see DB13 and ST04 logs in the system.
Hi All,
We are unable to see the DB13 logs in our SAP system. The same is happening while trying to look into the ST04 logs for Database Message Logs. In both the cases we find the same kind of log:
[in DB13 log]************************************************************************
BR252E Function fopen() failed for '/sapdba/sapcheck/cdvxzfrv.aly' at location file_printout-1
BR253E errno 2: No such file or directory
External program terminated with exit code 5
[in ST04 log]*************************************************************************
BR252E Function fopen() failed for '/sapdba/saptrace/background/alert_PIN.log' at location file_printout-1
BR253E errno 2: No such file or directory
External program terminated with exit code 5
SAP is running on Varitas cluster on two different nodes. One node is having SAP services and the another one Oracle services on it. Since the last week when we shifted the Oracle services from one node to another for monthly maintenace work, we are facing this problem.
Our system details are:
SAP 46C (kernel 46D_EXT) 32 bit
SuSe Linux 2.6.5-7 64 bit
Oracle 9.2.0.6.0
Can someone please help me on it.
AnilThanks Padmaja/Eric for your reply !!!
File systems are properly mounted and I can see these said files at OS level. Following are the env variable:
USER=dinadm
LOGNAME=dinadm
HOME=/home/dinadm
PATH=/oracle/DIN/920_64/bin:.:/home/dinadm:/usr/sap/DIN/SYS/exe/run:/opt/kde3/bin:/opt/gnome/bin:/usr/games:/home/dinadm/bin:/usr/bin/X11:/usr/bin:/bin:/usr/sbin:/sbin:/usr/lib/java/jre/bin
MAIL=/var/mail/dinadm
SHELL=/bin/tcsh
SSH_CLIENT=10.234.14.33 1364 22
SSH_CONNECTION=10.234.14.33 1364 10.234.13.50 22
SSH_TTY=/dev/pts/0
TERM=xterm
HOSTTYPE=x86_64-linux
VENDOR=suse
OSTYPE=linux
MACHTYPE=x86_64
SHLVL=1
PWD=/usr/sap/trans/data
GROUP=sapsys
HOST=insapr3din01
HOSTNAME=insapr3din01.pdc.in.ap.holcim.net
MANPATH=/usr/share/man:/usr/X11R6/man:/usr/local/man:/opt/gnome/share/man
MINICOM=-c on
INFODIR=/usr/local/info:/usr/share/info:/usr/info
INFOPATH=/usr/local:/opt/gnome:/usr
LESS=-M -I
LESSOPEN=lessopen.sh %s
LESSCLOSE=lessclose.sh %s %s
LESSKEY=/etc/lesskey.bin
PAGER=/usr/bin/less
MORE=-sl
GZIP=-9
CSHEDIT=emacs
COLORTERM=1
NNTPSERVER=news
XFILESEARCHPATH=/usr/lib/X11/%L/%T/%N%C:/usr/lib/X11/%l/%T/%N%C:/usr/lib/X11/%T/%N%C:/usr/lib/X11/%L/%T/%N:/usr/lib/X11/%l/%T/%N:/usr/lib/X11/%T/%N:/var/X11R6/%T/%N%C:/var/X11R6/%T/%N
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
QTDIR=/usr/lib/qt3
no_proxy=localhost
WINDOWMANAGER=/usr/X11R6/bin/kde
JAVA_BINDIR=/usr/lib/java/jre/bin
JAVA_ROOT=/usr/lib/java
JAVA_HOME=/usr/lib/java/jre
JRE_HOME=/usr/lib/java/jre
CVS_RSH=ssh
G_BROKEN_FILENAMES=1
GNOME_PATH=/opt/gnome:/usr
GNOMEDIR=/opt/gnome
ACLOCAL_PATH=/opt/gnome/share/aclocal
PKG_CONFIG_PATH=/opt/gnome/lib/pkgconfig
GTK_PATH=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
MODULE_VERSION=3.1.6
MODULE_VERSION_STACK=3.1.6
MODULESHOME=/usr/share/modules
MODULEPATH=/usr/share/modules/versions:/usr/share/modules/modulefiles
LOADEDMODULES=
CSHRCREAD=true
LS_OPTIONS=-N --color=tty -T 0
SAPSYSTEMNAME=DIN
DIR_LIBRARY=/usr/sap/DIN/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DIN/SYS/exe/run:/oracle/client/92x_32/lib
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=DIN
dbs_ora_schema=SAPR3
ORACLE_PSRV=DIN
ORACLE_SID=DIN
ORACLE_HOME=/oracle/DIN/920_64
ORACLE_BASE=/oracle
ORA_NLS=/oracle/DIN/920_64/ocommon/NLS_723/admin/data
ORA_NLS32=/oracle/DIN/920_64/ocommon/NLS_733/admin/data
ORA_NLS33=/oracle/client/92x_32/ocommon/nls/admin/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
SAPDATA_HOME=/sapdata/oracle/DIN
waiting for your reply,
Anil -
** Not able to see my business system in our XI server - ABAP Stack
Hi Friends,
When I try to execute the function module 'LCR_LIST_BUSINESS_SYSTEMS', I able to see all the business systems which I am maintaining in the SLD of XI. But, few business systems are missing. I want to see that system thru this function module. Moreover, when I try to execute the tcode 'SLDCHECK' it shows error in one place of the screen for this function module. But, at the end of the summary it shows the message successfully.
Friend, how do I add the missing business systems thru the above FM?
Kindly help me.
Kind Regards,
Jegathees PHi Friends,
I have tested the destinations TCP/IP connections 'LCRSAPRFC' & 'SAPSLDAPI' from our XI system. Its working fine. My user id is also having the role 'SAP_XI_APPL_SERV_USER'. So, I think there is no problem in the RFC issues.
The exact error message while run SLDCHECK is as below.
17.09.2007 Exchange Infrastructure: Test LCR Connection 1
Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_XID
gateway host: aprins10
gateway service: sapgw10
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: aprins10.aprilbiztec.local
port number: 51000
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host: %%RFCSERVER%%
program id: LCRSAPRFC_XID
gateway host: aprins10
gateway service: sapgw10
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
See the 3rd from the function module LCR_LIST_BUSINESS_SYSTEMS.
Friends, what could be the problem not to see the business system thru the above FM? But, the Business System works fine in RFC to RFC scenarios.
Kindly help me friends to solve this issue.
Kind Regards,
Jeg P. -
Par file customization (Am unable to see .par files in System Admin)
Hi,
Am unable to see any of .par files in system administration->support-->portal runtime-Browse Deployment
can any one help me.
Thanks in advance.Hi Mahesh,
Please check at System Administration >> Support >> Portal Content >> Administration Console >> Archive Deployment Checker >> Look for your deployed PAR file here.
Hope it will helps
Regards
Arun Jaiswal -
Unable to see system variable no in sap b1 due to watch
Dear Sir,
In SAP B1
I am generating report Customer Aging Report.
In PLD Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
system variable number.
The watch cover that variable no. how can i find system variable no.
is there any other method to see system variable no.Hi,
what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
when you have not installed the license properly after the installation, it shows the status as initial
go to SM51
there you can find the instance number along with the Hostname_SID_InstNumber of your server
thanks and regards
Abdul Hadi
Maybe you are looking for
-
How would you upgrade my MacBook Pro 15" to maximize performance? No dollar limit.
I love my MCB, but am not technical. Spend my money, theoretically -- If you had an unlimited budget to upgrade this system to make it fast and more efficient, what would you buy or do to it? I'm deciding if I should scrap it and get a new MacBook Pr
-
Greetings, I have an nokia lumia 1020 produced in HK and I live in Romania. The denim update is released in HK and in Ro too, but my phone doesn't found any update, help me if you can. Regards Vlad Solved! Go to Solution.
-
It's also always asking me to re-save the version of adobe player I downloaded and installed right after mozilla.
-
How to import Expected finish date
Hi all, It would be a great help if someone would tell me how to import the Expected finish date in P6 using Excel import. I actualized the start of an activity by changing the actual start date and tried to change the Expected finish date the same w
-
Elements 3.0 not responding
I'm using Windows XP and when I click on the program, it does not respond. I've gone to control panel and did the repair to no avail. There must be something that has corrupted the program and I don't know where to begin to look for an answer. Tech s