I am unable to see the screen on my iPhone. I want to transfer my pictures to my computer.

I just recently dropped my iPhone and the screen has vertical blue lines. I want to transfer all my pictures to my PC, but every time I connect my phone to my laptop... I receive a message that says:
"Tunes could not connect to iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes"
Is there any other way that I can transfer my pictures to my PC that doesn't require my passcode. Like I said, I cannot see my screen.
Thanks!!

Are you accessing the account with the Mail app?
If so and you want all server stored mailboxes available on your iPhone, you must create/access the account as an Exchange account. Instructions for doing so should be available via Microsoft's Hotmail website or try a Google search for it.

Similar Messages

  • My front and back screen is broken and I can't transfer my pictures to my computer

    My front and back screen is broken and I can't transfer my pictures to my laptop. HELP

    AndrewJBrez wrote:
    My front and back screen is broken
    There is no "back screen".
    If there were, it would be "My front and back screen are broken".
    Have you tried using the Photo Stream Control Panel?
    -> http://support.apple.com/kb/HT4083
    FYI: iTunes is not used to transfer photos to your computer.

  • On my ipod touch the screen went out and I want to transfer my stuff to my iphone, how can I do that if Im not able to put in a password?

    please help its including important school information. I was planning on getting a new ipod but it was to late.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • Please help me exit "full screen mode." I am unable to see the Safari menu bar.

    I have never used this tool. Please help me to "exit the full screen mode." I am unable to see the toolbar in Safari.

    kennedy0520 wrote:
    THANK YOU FOR RESPONDING. Is there a way to adjust settings in Safari, like my homepage? So far I am not pleased with the IPad. Wish I had looked at other tablets before buying. the main thing I don't like is Safari. I welcome any positive comments. Thanks.
    Safari doesn't include a Home page, but does allow for a multitude of book marks. In addition, there numerous other browsers available in the apps store. Some of them will allow for setting Home page if it is that important to you (personally, I don't miss it).
    The bookmarks bar can be be hidden from the setting app. There is no real tool bar in Safari.
    You might want to take a look through the User Guide and learn a little more about how the iPad works, if you haven't already.
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • When in dark mode, I'm unable to see the definitions on the screen when I'm looking up a word.  Is there a fix for this?

    When in dark mode, I'm unable to see the definitions on the screen when I'm looking up a word.  Is there a fix for this?

    Looking up definitions on the screen using Apple Dictionary? What application? Using shift+command+4, capture what you are referring to, and then use the camera icon in this posting toolbar to include it in your response.

  • The very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices

    the very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices, any ideas?

    Back up all data.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    defaults delete -g NSFullScreenDarkMenu
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V.
    Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Log out and log back in.

  • Unable to see the personalization link on any page

    Hi,
    I am unable to see the personalization link on any of my pages (not even on login page).
    I am setting the profile option value to "Yes" for the profile option
    FND: Personalization Region Link Enabled
    Also I have bounced the Apache.
    Please help me as I am stuck due to this.
    Thanks,
    Anoop

    Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
    Abhay

  • Unable to see the values in detail block

    Hello,
    I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
    Thanks
    FM

    IQ wrote:
    I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
    Does your non-database filed has associate any column ?
    For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
    Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
    SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
    FROM ACC_SUB_SUB_CONTROL
    WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

  • HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

    I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

    Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
    As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
    Did you use any third party software to move your Firefox data from internal memory to the storage card?

  • HELP!!! my ipod wont let me see the screen

    My iPod(5) .... Wont let me unlock, the "triple home click" doesn work and i cant see the screen because i turned on voice over and it froze turned off then turned on but the screen is still black. it also wont let  me turn off voiceover.

    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)
    Next would be to restore from backup via iTunes

  • At night, as soon as I plug my iphone to be recharged, my iphone starts behaving abnormaly.  It is like somebody has taken control of it.  I see the screens moving, music starts playing and then stopping, etc.

    At night, as soon as I plug my iphone to be recharged, my iphone starts behaving anomaly.  It is like somebody has taken control of it.  I see the screens moving, music starts playing and then stopping, etc.  I have noticed that several nights.  What I do is in Settings is to change  into Plane Mode, thinking that, may be if I do that, somebody that has taking control of it will not be able to download data.  Yesterday night, I was awakened by an alarm, whose setting I did not changed. When I looked over, the alarm screen changed to Settings and the Plane Mode changed alone in front of my eyes, from on to off.
    I have not observed such a situation during the day. Only when I plug the cable.
    I suspected that may be there is no Trojan installed. May be the cable, which is a spare cable, has been modified by a hacker, and it has electronics installed in the connector.  But tested with the original cable, and the behavior was the same, as described above.

    Thanks Meg for your reply.
    It could be that both cable are bad. But, anyway, you would not expect any of these manifestations, even with a bad cable. I had bad cable for my 4s, and never saw such a thing! 
    I contacted by chat the support of Apple.  They told me that this behavior could be a software problem and recommended me to do a full recover of my iphone. That meant, putting in at the factory conditions and recup all the data from the backup.  I did that, and the behavior did not change.  The backup was made with the data of my PC, not icloud.  Tomorrow will try with icloud and check if that will work. 

  • Unable to see the csv option while scheduling the report

    I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option.  Is there a way to enable in the csv option?
    Build version : 12.1.0.882
    Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version details

    Scheduling the reports in CSV formate is possible in BO XIr3.1.
    I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part.

  • I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

    I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
    I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

    Thanks for your help.  Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV.  I guess I'm just stuck with using iPhoto on my MB Air.  Thanks again.
    paul

  • My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

    My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything,  I have a child that is very ill and I have to have access to a phone at all times can someone help me?  It happened one other time when I plugged it in to my to listen to music.  I know it is working it said something on voice control.  I tried the press the circle button and the top button but the screen only turned white?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My iphone 4s is working but I can not see the screen.

    my iphone 4s is working but I can not see the screen. What is going on?

    Possibly backlight died, if you look at it closely in bright light can you see a "Shadow" of the screen image?
    First, back up your phone
    http://support.apple.com/kb/HT1766
    Then, restore the OS from scratch
    http://support.apple.com/kb/HT1414
    If that doesn't work, you'll need to have the phone serviced
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

Maybe you are looking for

  • Application Report Missing PL/SQL Functional Area

    All, I just wanted to bring to the ApEx developers something I just noticed... I use the Shared Components > Database Object Dependencies report to make sure all is well before moving applications into production. The Parsing Errors feature of that r

  • Unable to change and re-publish existing InfoPath forms on External SharePoint lists (SharePoint 2013 Enterprise Online and On Premise)

    Hi everybody, I really reached the limit of my diagnostic ability... ...please help me!!!! I subscribed an Online Sharepoint 2013 Development site to try Business Connectivity Services and InfoPath forms. Using SharePoint Designer 2013 I successfully

  • Improper code structure

    I am working on a jsp page and I am struggling with the proper way to indent my code. I know this is simple, but I just need a little direction first. If someone would be willing to show me how to format my code that would be most appreciated. <HTML>

  • DBMS_JAVA Permissions & Host Procedure Errors

    I have a package which calls a procedure "Host" (all source below) to execute a command. Everything was working fine, except I was't able to see the DBMS_output results. So, I tried to get the DBMS_Java.Set_output to working by playing with the dbms_

  • Regarding Upgradation of Project

    Hi Can you please guide me what exactly is the role of an BW consultant.. For ex: One XYZ  company is Using BW3.1 c now they want to upgrade the systems to BW 3.5 . In this scenario what is the role of an BW consultant and what exactly we are going t