I am unable to select the collate option to print reports. This a problem when using duplex printing
Attempting to print multiple copies of a report using duplex printing
Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN
Similar Messages
-
When I attempt to erase my hard drive, I am unable to select the "security options" tab?
I wish to erase my hard drive and for the contents of the hard drive to be unrecoverable. In order to do this, I have done some research and I believe there is a tab called "security options" when I go into "Disk Utility" and click "Macintosh HD." This tab is indeed there for me, however, I am unable to click it. What I mean by this is basically when an option is there but you simply cannot click it because... well, yeah, that's exactly my problem! I don't know why I'm unable to click it.
Thanks in advance!
Message was edited by: RyanValmontDo a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions. Then select the Erase tab. Format is Mac OS Extended (Journaled). Select Secure at the level you want. Erase and then reinstall the OS.
OS X Recovery
OS X Recovery (2) -
I am unable to sync my new iPhone 4s OR my iPod Touch 4 to iTunes.(this is the first time I am plugging them into iTunes) I have version 10.6.1. Both devices are up to date with the latest software version. Once I plug the device in, it is recognized on iTunes.The synce process does not start automatically. I am unable to select the sync option. I've tried reseting the device and restarting iTunes and the same problem happens. I have plugged in my husbands iPhone 3gs and the sync process starts automatically. I have also added my computer as an authorized computer for the new devices. What now?
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Boot Camp to install windows, unable to select the checkbox
Hello,
I recently purchased windows 8 64bit on a dvd and I'm trying to install it using Boot Camp Assistance on my Macbook Pro (early 2011). However, the second option is greyed out and I cannot select it.
I already downloaded the latest support software and I'm not sure why I'm unable to select the second option "Install or remove Windows 7 or later version"
Please Help/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 439.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Apple_HFS Backup 59.9 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *438.9 GB disk1
Logical Volume on disk0s2
Unencrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: IR3_CCSA_X64FRE_EN-... *4.1 GB disk2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *16.4 GB disk3
1: DOS_FAT_32 UNTITLED 16.4 GB disk3s1
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Boot Camp *1.4 GB disk4
Abdullas-MacBook-Pro:~ 3bdulla3moodi$
Name: Macintosh HD
Status: Online
Size: 439248101376 B (439.2 GB)
Free Space: 18882560 B (18.9 MB)
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 439248101376 B (439.2 GB)
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
Disk: disk1
Status: Online
Size (Total): 438876897280 B (438.9 GB)
Conversion Progress: -none-
Revertible: Yes (no decryption required)
LV Name: Macintosh HD -
Unable to select the value from a list item in forms 6i
Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
DeepthiIf you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony -
I can´t remove windows partition from my mac because I´can´t select the remove option from boot camp assit. Can any body help me?
open disc utility choose the drive you need partitioning highlight the bootcamp partition and click on the minus sign at the bottom left.
after this manually resize your drive by dragging the partition line all the way down and click on partition. -
Unable to select the operation mapping in Enhanced RD?
Hi Guys,
I am unable to select the operation mapping in the Enhanced Receiver determination in PI 7.1. Looks like a bug in PI 7.1. Did anybody else faced the same problem and got any resolution.
any help would be appreciated
Thanks,
SriniLooks like a bug in PI 7.1
Not a Bug but it seems to be a restriction......have a read of the below help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/94467db1746003e10000000a1553f6/content.htm
From above help section:
During the definition of the interface mapping, you assign the abstract service interface ReceiverDetermination as the target
interface. The service interface ReceiverDetermination is in the Enterprise Services Repository in the software component SAP
BASIS (namespace http://sap.com/xi/XI/System).
You will notice the same behavior when you try to select the Operation Mapping in Extended RD....click on the input help....pop-window will appear....what are the source and target SI that you see?
Regards,
Abhishek. -
Entity Framework - unable to select the oracle data connection
Entity Framework - unable to select the oracle data connection from the wizard that allows you to select the data provider. Even though we successfully added a data connection that points to an oracle database, we still can't select an existing data connection or create a new database provider that points to an oracle instance.
we are using both vs 2008 sp1 and vs 2010. We connect to oracle 11g and we use the latest oracle odp.net driver. the Driver is installed and working in vs studio.I had this exact problem when I started. I think I had downloaded the wrong odbc (the 64x version). When I unloaded that version and downloaded the 32bit version it worked.
Hope that helps. ~ Darla -
Unable to get the Approve option in Salary form
hi friends,
we are implementing payroll using UAE localisation, when i try to add new salary for an employee i am unable to get the approve option in the salary form..we are working on version 11.5.10.2..i have the given the setup steps below
HRMS Responsibility>People>assignment>salary >add New Salary..
I have attached the function the" Salary Approval" to the menu also..even we have bounsed the apache server also...still we face the same problem we are unable toget the approve option still we can see only the proposed optionand we are unable to enter the new salary for the employees...
Pleae advise your better openions to over come this..
Thanks and Regards
RajHi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna -
Unable to select multiple with holding tax codes.
This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]Hi,
Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
Thanks & Regards,
Nagarajan -
I am unable to select any 3D options in PhotoShop cc. Can anyone tell me why?
I am unable to select any 3D options in PhotoShop CC. Can anyone tell me why?
If on a Mac, It's in Preferences > Performance, if using Windows, Edit > Preferences > Performance
This should be checked on.
This should be at least 512 MB -
I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?
You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O. -
How do you create a appleid but i cant select the none option and i don't have anything to pay with.
Hello, did you mean create an Apple ID without any credit card info?
If that I can help. Just go to iTunes and choose a "Free" apps to download. After that, it will pop up with "sign in with existing Apple ID" or "Create a New Apple ID". Click create a new apple id. through this process, you will see a "none" choice in payment method while registering the Apple ID. -
Is there any workaround to auto-select the shipping options upon entering the zip/postcode?
Is there any workaround to auto-select the shipping options upon entering the zip/postcode? Because currently, the user still needs to select the shipping option again (radio button type).
Yeah, but its custom coding in conjunction with a 3rd party for the postcode lookup. You also then need to handle the annoying dom manipulation BC does with its code on things like discount code fields, shipping option changes etc effecting your code. You really need to have a good understanding of coding AND BC in this case unfortunatly.
Possible though, but if you do not want to pay for it to be done or not able to do it yourself - Best to avoid this if you can on the project. -
After purchasing a movie from iTunes, I clicked on the film and it brought me to the movie's DVD menu. However, it will not allow me to select it to play. I can select the "chapters" option, but I cannot select any of the chapters. Essentially, it is stuck on the menu.
Did the download complete?
Resuming downloads from a computer
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Click the "Check Downloads" button.
Click the Resume or Resume All button, or the resume arrow to resume the download.
from http://support.apple.com/kb/HT1725
Try right clicking or Control clicking the movie and choosing Show in Finder.
Can you Right click the movie and Open With QuickTime Player?
Maybe you are looking for
-
Late 2010 iMac Running Sluggish and Loud-PLS HELP
I have only found one or two threads relating to my specific problem, and I still need more help. Anyone's help (...Linc Davis) would be very much appreciated. First off, let me tell you what I am running. Late 2010 model iMac (3.2 GHz intel core). O
-
Can Acrobat be made to verify one form field against another?
Here is an interesting problem, and I'm wondering if Acrobat has the functionality to solve it. The sales department is holding up application processing time. They either forget to fill in blocks of information, or they misspell the buyer's name (B
-
Exact positioning of pointers in gradient fills
I have a gradient fill with 8 pointers. I want them evenly spaced apart. So far I have been eyeballing it. Is there a way to position them at precise points? For example, in the Flash-clone program Corel Rave, it displays a percentage (0 being at the
-
Error: binding="#{customerAction.outputPanel}": javax.ejb.EJBException
Hi every body, I have a problem since few days and I need someone to help me. I have implemented a .xhtml file that contains an outpuPanel and a HtmlPanelMenu. the outputPanel is binded to a htmlA4joutpuPanel property in my backingBean. when I execut
-
Xi installation - database instance error
hai everyone, while installing XI3.0, in the step database instance after specifying Exports DVD label.asc file i'am getting this error ERROR 2007-02-28 17:23:17 FSL-02015 Node C:/XI/DATA does not exist. ERROR 2007-02-28 17:23:17 MSC-01003 ESyExcep