I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

Do I need to delete all my email accounts and start again?

Similar Messages

Sending email using Mail from T-Mobile Hot Spot

I cannot send email messages from a Hot Spot using the Mail program. It says it cannot send using the server smtp.mac.com. This is the first problem I've had with this. Today is my first day using a Hot Spot. Has anyone encountered this same issue? Do I have to change some of the settings?
I tried using the Internet based .Mac account and was able to send messages but not directly from Mail program.

5. Does T-Mobile provide me with an email account?
T-Mobile does not provide email accounts for its users.
6. Can I access my personal email account through my T-Mobile HotSpot account?
You can access any web-based email account such as Yahoo.com or Hotmail.com. You can also access corporate email accounts if your employer provides you with a virtual private network (VPN) client and a firewall. T-Mobile strongly recommends that its customers take measures to ensure the security of their wireless connections, such as virtual private networks (VPNs), encryption and firewalls. As with any wireless communication, the T-Mobile HotSpot service is not inherently secure and you should ensure you have adequate security safeguards in place. See the Hotspot Security Statement posted on our website for additional information concerning the security of the service and steps you can take to enhance the security of the service.
http://hotspot.t-mobile.com/support_faq.htm#U1

I am unable to send emails using iCloud, but am receiving.

I am unable to send emails using iCloud from both my laptop and my ipad. I am paying for 25Gb of storage and am only using 3Gb at the moment. I get the following message " Your email has been placed in the Outbox as you have exceeded your limit for sending emails". I have not sent any emails today at all!

http://support.apple.com/kb/ht4863
Or contact Apple: https://getsupport.apple.com

Unable to send email javax.mail.MessagingException: 553 Domain require

Hello
When sending a test message using One to One fulfillment I get the following message
unable to send email
javax.mail.MessagingException: 553 <UNSET>... Domain name required"
Has anybody got this message before? how did you resolve it?
Thank you
Kind Regards
Eva

See if there is any space in the name of the email server. If yes, remove the space and stop and start the fulfillment server.
HTH

HT4061 My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

HT1430 I just upgraded to an i5 and I'm unable to send emails. It says my username and or password is incorrect, however all of my settings are the same as they were on my previous phone. Any ideas?

I just upgraded to an i5 and am unable to send emails. I can receive them however every time I try to send an email I get an error message saying my username and or password is incorrect. My settings are exactly the same as they were on my old phone... Any ideas?

Contact your email provider and verify you have the correct settings

Upgraded to 10.4.9 now cant receive or send emails using Mail.app

I just upgraded to 10.4.9 from 10.2.8 and now the new Mail.app(v2.1) can't receive or send emails.
"Sent" emails only get to the Outbox for trying again later.
"Get Mail" is answered after 20 seconds with an error stating among other things "The attempt to read data from the server "xxx.xxx.xx.x" failed"
I connect to the internet through ethernet which is connected to my work's server setup. Ethernet is at the top of the list of the Network Config Options.
Tried removing the Mail preference file and reentering settings - after settings added, says the server cannot be found.
It's a Mail.app issue as accessing the web is no problem, sending and receiving mail using Eudora and Thunderbird is no problem.
The problem occurred after I went to 10.4.9 as I received an email in the short time I was on 10.4.6.
Tried reinstalling Mail from install disk but it didn't want to install an older version of the program it seems.
Any advice would be appreciated.
PowerMac G5 1.8Ghz Uniprocessor Mac OS X (10.4.9)

Mac OS X 10.4.7 introduced connection issues in Mail similar to what you’re observing as a result of (according to the documentation) “Mail now supports connecting to mail servers through a SOCKS proxy”. If that’s the problem, it can usually be fixed by going to System Preferences > Network, choosing the network port configuration used to connect to Internet from the Show popup menu and disabling the SOCKS Proxy in the Proxies section, if it’s enabled.
And while you’re at it, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.

Unable to send emails using SMTP Plug In

Hi all.
I am trying to configure SAPConnect so that I can send emails from SAP to
external domains. I have done all settings in SCOT. But our Outgoing SMTP Server needs authentication. So in my JOB TRACE I am getting error '530 Authentication Required'.
In transaction RZ10 where I have maintained Instance Profile IDS_DVEBMGS00_IDES-SERVER
I have set Parameter: icm/server_port_0 with value PROT=SMTP, PORT=25. Is there any way I can pass "Authentication Required" as a value here or in transaction SCOT.
Anyone who has a solution plz help me.
Thanks and regards.
Vipin Varghese.

Thanks all for the help.
The server that I am supposed to configure that is the email server that you are talking about right?
I m fairly new into WF and these Basis steps are new for me.
There are 4 profiles created in RZ10 - 2 start profiles and 2 instance profiles.
I am making changes in an instance profile. But after the changes when I try to activate, its showing some warnings and errors. But somehow it gets activated and an instance profile with version 2 is actively saved.
Also when I open MS OUTLOOK and go to the account settings, for Outgoing server ( SMTP ) , Authentication Required checkbox has been marked.
Now is any one of these the problem?
Regards.
Vipin Varghese.

Sending Email using cl_bcs from a badi implementation

Hi,
I have written my code to send Email, inside AFTER_SAVE method of BADI Implementation of DOCUMENT_MAIN01.
Now this method of cl_bcs requires COMMIT WORK for the mail to be sent. And inside BADI implementation, we cannot write a COMMIT statement.
What is a workaround for this? While going through few other posts, I came across remote enabled FMs.
Is that the only way? Can I use some additions like STARTING NEW TASK etc. Following is the call used in case of cl_bcs:
   CALL METHOD G_REF_SEND_REQUEST->SEND(
          EXPORTING
            I_WITH_ERROR_SCREEN = 'X'
         RECEIVING
            RESULT              = G_SENT_TO_ALL ).
I also tried using SO_NEW_DOCUMENT_SEND_API1 STARTING NEW TASK and it works fine. But the subject length is a constraint their.
Please suggest.
Thanks in advance.

Hi friend.
*& Report ZTEST_273068_EMAIL_CL_BCS
REPORT ZTEST_273068_EMAIL_CL_BCS.
CONSTANTS:
    gc_subject TYPE so_obj_des VALUE 'ABAP Email with CL_BCS',
    gc_raw     TYPE char03 VALUE 'RAW'.
DATA:
    gv_mlrec         TYPE so_obj_nam,
    gv_sent_to_all   TYPE os_boolean,
    gv_email         TYPE adr6-smtp_addr,
    gv_subject       TYPE so_obj_des,
    gv_text          TYPE bcsy_text,
    gr_send_request TYPE REF TO cl_bcs,
    gr_bcs_exception TYPE REF TO cx_bcs,
    gr_recipient     TYPE REF TO if_recipient_bcs,
    gr_sender        TYPE REF TO cl_sapuser_bcs,
    gr_document      TYPE REF TO cl_document_bcs.
TRY.
      "Create send request
      gr_send_request = cl_bcs=>create_persistent( ).
      "Email FROM...
      gr_sender = cl_sapuser_bcs=>create( sy-uname ).
      "Add sender to send request
      CALL METHOD gr_send_request->set_sender
        EXPORTING
          i_sender = gr_sender.
      "Email TO...
      gv_email = '[email protected]'.
      gr_recipient = cl_cam_address_bcs=>create_internet_address( gv_email ).
      "Add recipient to send request
      CALL METHOD gr_send_request->add_recipient
        EXPORTING
          i_recipient = gr_recipient
          i_express   = 'X'.
      "Email BODY
      APPEND 'Hello world! My first ABAP email!' TO gv_text.
      gr_document = cl_document_bcs=>create_document(
                      i_type    = gc_raw
                      i_text    = gv_text
                      i_length = '12'
                      i_subject = gc_subject ).
      "Add document to send request
      CALL METHOD gr_send_request->set_document( gr_document ).
      "Send email
      CALL METHOD gr_send_request->send(
        EXPORTING
          i_with_error_screen = 'X'
        RECEIVING
          result              = gv_sent_to_all ).
      IF gv_sent_to_all = 'X'.
        WRITE 'Email sent!'.
      ENDIF.
      "Commit to send email
      COMMIT WORK.
      "Exception handling
    CATCH cx_bcs INTO gr_bcs_exception.
      WRITE:
        'Error!',
        'Error type:',
        gr_bcs_exception->error_type.
ENDTRY.
Just Execute it.
Regards,
Thrimu

Problem emailing using Mail from iPhoto.

When I email photos from iPhoto using Mail and have text under the photos some of the recipients receive the photos with the text superimposed onto the photo making it illegible. Is there some way to avoid this? If I send a copy to me everything is fine. I am not using any of the "fancy' templates in iPhoto, just plain photos with text.

Since posting this I found another post about this problem. The response to that post should solve my problem.

I am unable to send emails via my iphone 4s, i can recieve them no problem

I am currently with utility warehouse in the uk who is my service provider for emails.
I have purchased an iphone 4s and my partners is identical to mine, with the same provider, with the same settings, however, my partner can send and recieve whilst i can only recieve, i keep getting a message "A copy has been placed in your outbox-please go to mail account and enter a password", i have tryed you tube for help, my own provder didnt help so am really struggling, can anyone help Thanks

Go into settings - mail - account - and then look for the outgoing server - click in there and there should be a place for you to enter your password - just as you would when you first set up your email account.

Can I send email using Java from my localhost(Tomcat) with Internet connect

Hi friends,
Please tell me can I send email from my localhost (Tomcat) using Java when my computer is connected to Internet?
I don't have any SMTP username or password or the like, as I found in some codes available in net.
Please suggest and any simple code if possible.
Please don't send me the link of JavaMail API to read.
---Sujoy

Thank you for the link. Though I have not tested the provided code, I will test it.
--Sujoy

Unable to access my iCloud mail from an portal and need in ASAP. How can I access my messages?

At around 9:00P Pacific last night, I received my last email message through iCloud to my [email protected] address. I've tried on my iPad, PC, MacBook Pro and iPhone. I've done a full password reset to be compliant with the newest password standards. I've deleted my iCloud account from my MacBook Pro and iPhone. I've reset network setting on iPhone. Then I tried to log into iCloud.com (should have tried earlier) and I can get to all my applications (calendar, documents, etc.), EXCEPT Mail. I can't find any available route to access my .me mail and need to get to it urgently for travel plans and work documents.
Any suggestions? Please assist if possible.
So far, Apple hasn't been able to help either.
TA

The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/ has the following on the status:
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

I am unable to send emails using apple mail, but can still receive

A very odd situation this. I have a couple of POP3 accounts and an Exchange server account. All was going well until a few days ago when all my accounts stopped sending mail, but still continued to receive mail. I have removed each account and restored it but this hasn't worked, the timer is constantly spinning against the 'Sent' header. All these accounts work in their webmail version so I have to conclude the fault is with Apple Mail. Can anyone help please? Thanks.

Troubleshooting Mail.
http://support.apple.com/kb/ts3899

Sending email using mail that looks like a web page

I want to send an email that looks like a web page (kind of like those emails from apple or other companies). I tried making a document in Pages, but then that didn't quite work. Of course, I could make the pages document into a pdf file, but that's not ideal. Any recommended application?

Check Composing HTML messages in Apple Mail.

I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

Similar Messages

Maybe you are looking for