I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page
i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.
Contact Apple support for warranty service.
Similar Messages
-
I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.
Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup -
my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on. can you please help?
my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on. can you please help?
-
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.
It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad: File>Transfer Purchases -
i own a ipod touch and a ipad2g but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help
Ive never used that but I think there is a find ipod app. But im not sure. The ipod might have had to have it on?
-
Good day i am having a problem with loading maverick on my mac tower 10.6.8..my computer guy set the hard drives up in different ports, so i put my operating system 10.6.8 on another hard drive to see if that would work,but i notice the main hard drive and the one i choose changed places on my desk top ,but i still cant download Maverick.. probably something small but i don't no that much about this problem...please help..lol
What kind of Mac do you have. A PowerMac cannot run Mavericks, nor Snow Leopard (10.6.8) for that matter.
-
New Mac only 5 days old. Daughter accessed a movie website and now popups keep appearing and unable to access any other Internet sites without being redirected. Have deleted her as a user and then tried to restore to factory settings. I did something wrong and it is now doing an Internet recovery. Help I am completly lost and don't know what I am doing.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
How do i put photos from my computer to my camera roll on my ipad? please help me
im new to the ipad world and i need to put photo's from my computer onto the camera roll on my ipad so the photo shop can print them out. please help me
Hi Sir Kelpie,
The Camera Roll on your iPad only contains pictures that you have taken with your iPad. To get pictures to download from your computer, you need to sync your iPad through iTunes, and sync whichever photos you have selected to be sync'd on the Photos tab.
Once you attach your iPad to iTunes, look at the photo tab. There you will see options to sync Albums, Events, etc. Select what you want to sync, and then sync them to your iPad.
Hope this helps!
Cheers,
GB -
I got this phone for christmas off of ebay. it came unlocked & im using straight talk. this morning the screen began glitching. i googled it and it seems to be a common problem with the iphone4. i did what others said to do & reset my phone. the only problem is that my computer back up did not work. i tried using icloud to back it up but my phone won't connect to any wifi. And the screen still glitches.. Please help.
Try here.
iPod Troubleshooting Assistant
Make sure and select the correct iPod. -
Hello who can help me?
İ need to open the 3d animation pdf. But my mac is not able to open it and my friends have also the same problem.
İ need this information for my work. İt would be very nice if someone could tell me how i can open the 3 d animation .pdf files. Under windows it is no problem, because adope reader is open it. İ also check the site of adobe to find answers, but no results.If there is no info on Adobe about it, this is probably a case where there is a special 3D plugin that Adobe has access to on your PC. You need to find out what software generated the 3D. Then you can find out if there is an equivalent Mac compatible plugin. That said, you can always run Windows on an iMac Intel if push comes to shove:
https://discussions.apple.com/docs/DOC-2741 -
PLEASE HELP - MY NOKIA 6730 PHONE IS STUCK ON VIDE...
Hi
I really hope somebody can help! My Nokia 6730 is showing 'Video call' and has been stuck like that for the past 3 hours. The time on the phone is even stuck and I can't turn the phone off. Any suggestions?
Many thanks.Take off the back of the phone.
Take the battery out.
When you get it restarted, see if the same issue occurs. It could just be a bug.
Help I'm trapped in a sig factory. -
I need help with FaceTime every time I sign in it tells me check network and try agin my network is working and I try it agin it say the same thing over and over it does it on messages on my I pod touch 4g
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings -
I recently had a hard drive crash and lost almost everything except for what I managed to save on Carbonite. When I got the new hard drive, I updated to Lion and began the laborious process of restoring my files. I think it is up to 40% done.
Anyway, I went to try to transfer my purchases from my iPad2 (4.3.3) and received the message: "You do not have enough access privileges for this operation" followed by: "Attempting to copy to Hard drive failed. You do not have enough access priviledges for this operation."
So, I did a search on the problem and have found similar complaints and some reasonable suggestions, which I attempted without success. So far I have:
1) Rebooted
2) Changed all the Permissions on the iPhoto Library and iTunes folders to Read & Write.
3) Used Disk Utility to Verify & Repair permissions.
Nothing is working.
HELP!Had the same thing happen to me a few weeks back when I switched computers and migrated. Here's what worked on my iMac, so maybe it'll work on your iPad, too. Go to User(your home folder)/Music. Select/highlight your "Music" folder. Then do Command-I ("Get Info" from the File menu), click on the padlock icon in the lower right of the new window. Enter your user password. Click on your username just above the now-open padlock. Select "Read & Write" if it's on "Read Only," "Write Only," or "No Access." Now having your user account with "Read & Write" privileges (it may have been this way already; still do this next step), click on the gear on the bottom-center of that window. Click on "Apply to all enclosed items." When the pop-up says "Are you sure?" (or the equivalent), say "yes." This will grant access privileges to your user account for all the music files inside your music folder--all your iTunes stuff included). Then you should be good to go.
-
My WiFi will stay connected for some time but then when it goes to sleep or randomly it will turn itself off. I used to have to restart the computer a few times but now its telling me WIFI:No hardware installed Please help
My WiFi will stay connected for some time but then when it goes to sleep or randomly it will turn itself off. I used to have to restart the computer a few times but now its telling me WIFI:No hardware installed Please help
Maybe you are looking for
-
Firefox was working prior to updating to version 17. Then when I click it, it won't start. I tried to start in Safe Mode, also Reset Mode. I tried to uninstall version 17, and do a clean install. Also, I cannot run an older version of Firefox since t
-
How to view all pages of a multi-page HTML email in Mac Mail 5+ (Lion to Mavericks)?
In previous versions of Mac Mail (up to that included with Snow Leopard, Mail 4), it was possible to scroll through all pages of a multi-page HTML email, like that send from the Tivoli Storage Manager reporting system. Since Lion, that has not been p
-
hi. i'm automating the high cut frequency on the channel eq to do filter sweeps. every time i go to write the automation the volume of the track skyrockets. anybody know why? i had my song mixed all nice and it's getting screwed up.
-
hi guys i need to run eclipse on solaris 10 any help on step by step, i am new in solaris but i am a java programmer.
-
I have created Table Maintennace generator for a table.When the user enters the tcode of TMG,I want show only particular entries of the table.Can i achieve this if yes?Plz Explain.