I am unable to set up my new Time Capsule with my BT Home Hub - every time i connect the ethernet cable from Wan port to Home Hub, the internet signal drops

Hi there -
I've just purchased a new Time Capsule, and would like to set up a small home network with my Laptop, iMac and wireless printer. I'm following the first steps, but as soon as I connect an ethernet cable between the WAN port of the TC and the ethernet port of the HH, my BT internet connection drops out and I have to restart the HH. Upon which point it drops out again. The airport utility can see my TC, and gets as far as me typing in the new network name and setting up a password, but then it can't quite get through to the next stage. All the time it's just flashing amber.
Please help!

Setup the TC in bridge mode before you cannot it to the HH.
Simply do the setup fully in isolation. And do it by ethernet.
Setup wireless to create a wireless network.
You can use either same SSID =Wireless name as the HH .. same security same password.
Or use a different name and setup.. totally up to you.
Update the TC and then plug it into the HH by ethernet.

Similar Messages

  • Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know).  What gives?  It works fine when the PC is off.

    Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of).  What gives?  When the PC is turned off, everything is totally fine.  I\m stumped. 

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    I suspect a problem with your router. Try changing the security. First use no security as a test.
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Setting up time capsule with existing wireless router and another time capsule

    Hello,
    I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
    Is this true?? I find it hard to believe this issue hasn;t come up before.
    Thanks,
    Deborah

    Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
    Would I need to connect my time capsule directly to the router for first time set up?
    If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
    Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
    I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
    Thanks, I really appreciate your help!
    Deborah

  • How do I organize photos in DVD size folders, by topic, by date, etc?  I plan to set up a new archive on an external hard drive (1 TB) for about 7500 photos.  Some from a series of XP files, the rest from iPhoto.  I use iPhoto11 on Lion with a 2011 MacBoo

    I need to know several answers, and I don't feel I can do it without the basic folder system.  Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.  How can I keep the captions on my photos (not events) when I print or transfer to a new folder?  I have been using computers for 20+ years for photos, and have scanned some on Windows and transferred some but not all that I wish to archive in new compositions, albums, whatever that are not all on iPhoto.  i also am concerned about overflowing my capacity on MacBook Pro 2011.  Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.  Is this my only option?  I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?

    Paragraphs help the reader, just saying.
    What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
    Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
    It makes no difference at all.
    How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
    You can export while writing the metadata to the file in most cases.
    Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size. 
    HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
    I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
    Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
    You're somewhat confused and you need to
    1. Decide what exactly you want to do
    2. Then go about it.
    If I understand you correctly - and there's no guarantee that I do -  the easiest thing is to bring all your Photos into iPhoto and do everything from there.
    You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
    Regards
    TD

  • Time Machine set up on Time Capsule with data already on it

    I've had a Time Capsule for a while, using it with my Powerbook G4 running OS 10.4. I put a lot of data on it including my entire iTunes library. I just got a new MacBook Pro with OS 10.5. Now I want to set up Time Machine. Can I do this on a Time Capsule with data already on it? I haven't given it a try because I don't have the data on the TC backed up (I know I need to fix that). TM won't require me to erase the volume first will it?

    I discussed this issue with Apple Care at one point in the past when I was considering doing something similar to you.  They informed me that Apple does NOT recommend or support using Time Machine over a network (ethernet) connection.  They said Time Machine was not designed for it.
    Hope this helps

  • New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

    'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

    Hi munaxnight,
    If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'.  When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone'  Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted.  This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??

    How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
    == This happened ==
    Every time Firefox opened

    Firefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
    See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    To have new tabs open a specific web site, add one of the following extensions:
    http://sogame.awardspace.com/newtaburl/
    https://addons.mozilla.org/en-US/firefox/addon/777

  • I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says Voicemail Unavailable, try again later. Any help would be greatly appreciated! thanks

    I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says voicemail unavaliable, try again later. Really do not know what else to try. Any help would be greatly appreciated! thanks

    Voicemail is a Carrier feature... Contact your Carrier...
    But first... Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

    How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

    Yes, you can ..
    Read Q17 here.
    http://pondini.org/TM/FAQ.html
    Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

  • How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up my time capsule with my PC and BT home hub

    Hi, I really need help.
    I have a new time machine I am having trouble setting up. I have a BT Home Hub that I have hard wired to the TC to the WAN port. I have Connected my PC to the Ethernet port. The PC will not find the TC.
    I also need to Wi-Fi attach other laptop PCs to it.
    PLEASE CAN SOMEONE HELP?
    Ade.

    You might have an IP collision ..
    unplug the wan connection to the home hub..
    Restart the Time Capsule with a single ethernet connection to a pc plugged into its LAN port.
    Make sure the pc is getting an ip address. Open airport utility and see if you can now access the TC.. !
    When you say PC do you mean windows machine?
    Windows can have some issues accessing the TC.. especially if you have the windows computer on win7 running homegroup.. which is a wretched piece of incestous connection between win7 exclusively.

  • New Tabs appear as :Blank, why don't they open in my home page every time?

    I have set my home page to the standard Google Ireland search page and this works fine. But when I open a new tab, it opens as a blank tab every time.
    The TAB section under TOOLS does not allow me specify what I would like a new tab to open as....
    It just opens a blank tab every time.
    How can I make a new tab open as the home page every time?

    New Tab Homepage extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/777

  • I am trying to back up on my new time capsule with my mac book pro.  It's been 25 hours and only done 5.8gb of 129gb. any advice.  Thanks

    I am trying to back up on my new time capsule with my mac book pro.  It's been 25 hours and only done 5.8gb of 129gb. any advice.  Thanks

    You can backup 2 computers as long as the TC has enough space.
    Your access might be restricted if you set it up with users.. you must log in with the correct user to get access to the files.
    Otherwise you should be able to see both sparsebundles just with finder.
    Look at Pondini's excellent FAQ
    this one in particular may help
    http://pondini.org/TM/17.html

Maybe you are looking for

  • ITunes and I seem to have created duplicate files.  How do I clean this up?

    Hello experts.  I have a conundrum I'm too inexperienced to reason out.  Hoping to tap your creativity. I have a huge iTunes library I've created over the years.  50,000+ songs.  No problem, other than my desire to whittle through it slowly and pare

  • IDVD vs VisualHub

    I like the ease of use and options in iDVD, but not the quality of video when importing XVID avi files. They end up very blocky, regardless of the settings (already using "best quality", and I'm not out of room on the disc build). VisualHub provides

  • Save data to server by an app

    Hi folks, I need to save some text, or an array, into a server... directly from my app developed in Adobe AIR using Flash (Action Script 3). Can you help me? Thank you so much! Cheers Brandon

  • Does JaxB support inported schemas?

    hi i'm trying to compile the CD_DataBase.xsd schema (using the JaxB that I got from the JWSDP found at Sun's site) which references to an Album element in Album.xsd For some reason, my xjc task falls when trying to read the imported schema. here are

  • Oracle Workflow Monitor

    I've seen plenty of references to Oracle Workflow Monitor, but I've never paid much attention. Yesterday I got an error message from Control Center that instructed me to use Oracle Workflow Monitor to solve my problem (a process was running and neede