I am "unable to sign in" to Youtube from my new appletv - suggestions?

I Am trying to set up my new apple tv - in particular - I am trying to watch youtube - but am "unable to sign in" - "this account cannot be used with apple tv - " try again using a different account" - I am not sure sure what this means nor am I sure what to do to get a different account - suggestions greatly appreciated - thanks from London, Canada

This happened once to me, I did a factory reset on my ATV3 and it worked for me.
Try that,
Assuming you are using a gmail account, do you use the 2 step verification? If so you need to create an app specific password to use when logging into youtube on the ATV.

Similar Messages

  • Unable to Sign In to iTunes from apple tv (1st Gen). GRRRRR!!!!

    Two days ago I was searching for movies to rent. So I casually went on to the Apple TV to browse all the HD movies. The #1 movie was Iron Man 2 (I watched the preview), #2 was Get Him to The Greek. I decided to opt for the comedy and rented Get Him to The Greek right from my Apple TV. I watched it and all was right with the world.
    The next night I decided that I'd rent Iron Man 2 (wife's out of town). So I go into the Apple TV to get it since I knew that it was the #1 top rental the previous night was Iron Man 2. Much to my surprise, Iron Man 2 was nowhere to be found in the iTunes store on the Apple TV. Not further down the top rentals list. Not in the alphabetical listing of all movies, not even in the search. "Well that's bizarre," I said to myself. "I wonder if I can find it in the regular iTunes store on my Mac Pro?" Well sure enough, iRon Man 2 was there. So I rented it on the Mac Pro. Curiously, it didn't show up on my Apple TV. I waited and waited. So I went back to iTunes and, oh silly me, I have to put it there in the iTunes sync dialog and then sync the Apple TV. I did that, and since it was late, I went to bed.
    Today, I finally got the kids to bed and cleaned up and decided to watch my rented Iron Man 2. Fire up the Apple TV, see that Iron Man 2 is right there at the front of the listed movies on my Apple TV. Sweet. Select, select play, settle in with a nice drink and ....
    Your Apple TV is not authorized to play this content.
    What the?!?!
    Hrm. That's weird. Well let me double check that I can play Toy Story (a movie I had downloaded and watched with my boy a while back). Yup, Toy Story works all right. So I decided to futz around a bit to see if I could figure out *** is wrong. Over to the settings list, hmm, maybe I should try the "Downloads" option? Click. Okay it says "Check for Downloads." Sure why not. Click. Enter your Apple ID. Yeah okay. Now enter your password. Done. And...
    Unable to Sign In.
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
    What? Oh silly me, I must have made a mistake and entered the wrong email address or password. I'll just do it again, I'm sure it'll work this time. And...
    Unable to Sign In.
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
    Um. Okay, third time's the charm. First let's go into iTunes on my Mac to make sure that I really am entering the right information. Yup, exactly what I thought I entered on the Apple TV. So back to the Apple TV to enter the username (and triple checking it) and the password (carefully inspecting each character as I do it). Still no luck.
    Well I guess I'll look up this error online. I found an Apple Support document that indicates there is a problem with aol.com email addresses to log onto iTunes from the Apple TV. That shouldn't be it, I'm using a gmail.com address. Then I found an Apple Discussions link from 2008 where people were flustered by this issue. A few had gotten their Apple TVs to work again by unplugging the Apple TV and deauthorizing and reauthorizing the computer the Apple TV is sync'd to, plugging the apple TV back in and syncing the Apple TV back to the computer.
    I gave that the old college try. I came back to try the Apple TV and still got that Iron Man 2 was not authorized on the Apple TV. I thought I'd try Toy Story just to make sure that it still worked. Now that movie said the Apple TV was not authorized to play that movie.
    I'm going backwards! Things that were working now aren't and I've spent my entire night trying to figure this crap out. Someone please help me make this "just work" so I don't have to go and smash it to pieces with a baseball bat. My stats as of right now:
    1) I can't log into my iTunes account from anywhere it asks for it on the Apple TV. I've tried settings>downloads, settings>general>itunes store, settings>general>network>test network.
    2) I can't log into my YouTube account. I've triple checked that my information is correct.
    3) I can't play any movies purchased through iTunes even if they were purchased from my Apple TV.
    4) I CAN play music and a music video that I purchased on my Apple TV and music I purchased from my Mac.
    5) I can play a TV season that I purchased some time ago on the Apple TV.
    6) I can log into my account in iTunes from both of my Macs.
    Oh also to get the easy questions out of the way: 1) Yes I'm 100% certain that I entered my username and password correctly. 2) I am completely up to date with my iTunes software on the Mac and my Apple TV software (as far as I can tell).
    I'm trying to stay calm and keep things light. But holy crap this is frustrating. I spent good money on the movies that I can't watch. I wasted hours and hours of my time troubleshooting and researching only to find myself going backwards and losing the ability to play things that I once had no problems playing. This just isn't working and I wasted my whole night on it. Someone please help!

    I cannot help you other than to say I have exactly the same problem and have been trying to resolve it for over an hour now with no luck.
    Besides unplugging and replugging in my ATV I have also tried:
    - resetting my password to the same thing
    - resetting my password to something else
    - creating a new Apple ID and trying to use it
    None of this works.
    At this point I am guessing that Apple's servers are hosed and the error message is just incorrect. Hopefully they will fix the problem at their end over the weekend.
    And yes. Holy crap this is frustrating is putting it mildly.
    It amazes me that just a few hours ago I was playing with FaceTime and thinking very positively of Apple, but now I'm just ****** at what is clearly a screw up on their part.

  • I can't sign in to YouTube from the iPhone app...

    I've searched and seen a lot of people posting about this.  However, nobody seems to be having the same problem as I am.
    When I attempt to log in to YouTube either from the YouTube app, or from my video upload screen, it just continually pops up the YouTube sign in screen.  No error message.  I know I am using the correct YouTube sign in - I have verified it.  I do not have 2 step authentication activated on my Google account.  Why can I not sign in?  I am extremely frustrated by this - all I am trying to do is upload a video I took on my iPhone 4, and I can't even get signed in to YouTube.  I can get there from their mobile site, but frankly, why do I have an app if I can't use it? 
    Can anyone help me?

    I was actually never able to "restart" the youtube app, because its a "stock" app, and they can't be deleted or restarted. I actually set up the 2-step google verification according to the advice in the previous posts, and that wasn't working so I switched it back from the verification. Then I took the ipod to school, and used it there and it worked again...I think maybe it was a problem with my WiFi at home or something..? Honestly, I was not really sure what fixed it...sorry, that's probably not super helpful for you...what exactly is the problem with your youtube app on your ipod touch?? Can't sign in...??

  • Unable to sign up/enter prinder code for new printer?

    Unable to access eprintcenter.com to sign up & enter printer code for my new printer??

    Hello,
    It may be that you have a SnapFish.com account. Alot of long time customers of HP have SnapFish.com accounts and do not realize it. One of the printer software releases signed customers up automatically, and most people did not know, or forgot, because they never used it. Try going to SnapFish.com and using the forgot password link at the log in screen there. Once you have the password reset, go to ePrintCenter.com and use the SnapFish.com log in information to log in. If that does not help you may need to contact SnapFish.com directly to have them delete the account, or use a different email to register with.
    If you are getting an error message, let me know the error and I will see what I can find on it.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I am unable to sign in to imessage on my new iphone 5.  Says check network connection

    I just got a iphone 5 and I am unable to log on to my apple id.  It says check your connection.  I have wifi in my house.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • AirPlay YouTube from iPhone to AppleTV over LTE w/ No Hotspot

    The goal:
    My goal is to AirPlay Youtube videos from the iPhone 6+ on iOS8.1 to the AppleTV v3 on 7.0.1 over LTE without using the iPhone as a Hotspot.
    The problem:
    The problem is that streaming video from internet sources does not function. However, I can do AirPlay mirroring of browsing websites over LTE. I suspect that I am making a mistake in my network configuration OR that what I am attempting to do is not possible.
    The hardware:
    To achieve my goal, I am using three hardware components: (1.) the iPhone 6+, (2.) the AppleTV v3, and (3.) a TP-LINK TL-WR702N Wireless N150 Travel Router.
    Travel Router Configuration:
    Firmware version: 4.18.96 Build 140729 Rel.58334n
    Hardware Version: WR702N 1.0
    LAN IP: 192.168.0.254
    Subnet Mask: 255.255.255.0
    Wireless Mode: Router Mode
    Wireless Radio: Enable
    Name  (SSID): Geek-Now-Boss-Later
    Channel: Auto (Current Channel 6)
    Mode: 11bgn mixed
    Channel Width: Auto
    Wireless Security: Disable Security
    Wireless MAC Filtering: Disabled
    Transmit Power: High
    Beacon Interval: 40
    RTS Threshold: 2346
    Fragmention Threshold: 2346
    Enable WIMM: Yes
    Enable Short GI: Yes
    Enable AP Isolation: No
    DHCP Server: Disable
    Start IP Address: 192.168.0.100
    End IP Address: 192.168.0.199
    Address Lease Time: 120 Minutes
    Default Gateway: 0.0.0.0
    Default Domain: [BLANK]
    Primary DNS: 0.0.0.0
    Secondary DNS: 0.0.0.0
    In the router, I have reserved my AppleTV's Wireless MAC Address to: 192.168.0.100
    AppleTV Network Settings:
    Settings >> General >> Network
    Wi-Fi: Geek-Now-Boss-Later
    Network Name: Geek-Now-Boss-Later
    IP Address: Manual 192.168.0.100
    Subnet Mask: 255.255.255.0
    Router: 192.168.0.254
    DNS: 192.168.0.254
    iPhone 6+ Network Settings:
    General >> WiFi
    Joined: Geek-Now-Boss-Later
    Static IP Address: 192.168.0.101
    Subnet Mask: 255.255.0.0
    Router: [BLANK]
    DNS: [BLANK]
    Search Domains: [BLANK]
    What I am able to do:
    Use the AppleTV remote APP on my iPhone to control the AppleTV.
    Use AirPlay to stream music on my iPhone to the AppleTV.
    Use AirPlay to stream video on my iPhone to the AppleTV.
    Use AirPlay to do iPhone mirroring.
    Browse the internet over LTE and mirror various webpages to the AppleTV.
    Load the YouTube APP on the iPhone and mirror YouTube video search results to the AppleTV.
    What I am NOT able to do:
    Load video from YouTube and have it play over AirPlay.
    The "loading spinner" is displayed on the television AppleTV and on the iPhone.
    After a time, the video fails to load and this error message appears in the YouTube video placeholder on the iPhone "Playback error / Tap to retry." At the same time, this error message appear on the television: "An error occurred loading this content. Try again later."
    If, while the video is loading, I switch AirPlay FROM the AppleTV TO the iPhone, the video loads fine and I can watch it on my iPhone.
    Any suggestions or insights would be appreciated!

    Hey,
    I'm using the exact same setup for my car, and am facing the exact issue.
    I suspect the problem is from how YouTube app works. All the "What I am able to do" and "What I am NOT able to do" make me believe that when Airplay-ing a video with YouTube app on iPhone, it sends the url to Apple TV, asking Apple TV to download the video directly over its own network. With our network setup, the router is not connected to any internet source, resulting in endless spinner on screen.
    I'm not sure if there's any workaround solution without turning on Hot Spot... please let me know if you found any.

  • HT201071 I am unable to transfer pictures to iPhoto from my new Nikon D4S DSLR. Any suggestions?

    I recently purchased the Nikon D4S professional DSLR. I am unable to import pictures to iPhoto. Any suggestions?

    I've now achieved success at my end. Let me describe.
    The Nikon D4S uses either USB 3.0 or Gigabit Ethernet to communicate with a computer. It speaks USB without any intervention or configuration on the user's part, it looks like mass storage. Ethernet connectivity requires a bit more configuration. My issue was getting Ethernet connectivity working.
    The camera communicates via Ethernet in several manners: FTP transfer to server, HTTP web server, PC communication and Camera Control. Each requires setup both on the camera and other end to work properly. Configuration is mostly done on the camera. It's done pushing buttons therNikon offers a utility - "Wireless Transmitter Utility" - to help with setup via the computer.
    I wanted "PC Communication" as it simply pushes the contents of memory cards directly into a directory on the computer that you specify. I began with my 13" Retina MBP, running 10.9.2 and using v 1.3 of Nikon "Wireless Transmitter Utility" which configures the camera/computer to handle IP traffic, wireless or wired. I was planning to directly connect the camera to the MBP (w/o router or switch).
    To use the Nikon utility, you need to have both an Ethernet cable and a USB cable. You connect the camera via USB, turn on the camera and launch the app. You choose which type of Ethernet functionality you want to setup and use the app to configure that. About 3 or 4 steps in, the apps will load your configuration (IP address, ports, handshakes, names, etc.) into the camera via USB. That's where I was getting stuck. It would simply timeout.
    I said earlier that I knew the connection (Ethernet) would work as I'd set it up manually on the camera. I could get web server (HTTP) comms working but could not get PC Xfer working. This told me that it wasn't hardware, drivers or cabling but something in software.
    Last evening I tried the setup again, this time on a MacBook Air. Because the Air had no direct Ethernet connectivity, I connected the camera via cable to a TimeCapsule. The Air was connected wirelessly. I downloaded the Nikon utitility and found a newer version - v 1.5. Upon connecting the camera via USB I was able to get past my previous block and could add/delete configurations. I deleted all of them and began fresh.
    Success! The MBA --(wireless)--> TimeCapsule --(Ethernet)--> D4S worked fine. I specified a directory off of root, enabled the transfer on the camera and voila! It streamed the entirety of the CF card onto the computer. I got both RAW and JPEG files across.
    I then installed v 1.5 of Nikon "Wireless Transmitter Utility" on my 13" Retina MBP. I connected the camera via Thunderbolt --> Ethernet with similarly successful results. It is now fixed.
    As for being able to interpret the .NEF (RAW) files, I cannot say whether or not any Apple software will do so as I use Lightroom.
    I hope this helps someone.
    Steve

  • Iphoto and Facebook aren't communicating. I'm unable to post pictures to FB from iPhoto. Any suggestions?

    IPhoto and Facebook not communicating. Pics won't upload from iPhoto to Facebook.

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4847 i am unable to sign into icloud on my windows 7 computer using the icloud control panel . keep on saying server error

    unable to sign into icloud account from my windows 7 pc. keep on getting the message serwr not available

    Hi,
    In the Finder use the Go Menu whilst holding down the ALT key.
    Select the Library that appears when you do this.
    Navigate to Containers/com.apple.soagent/Data/Library/Preferences
    You will notice that many of the items are Aliases (to the Originals in ~/Library/Preferences).
    But there are exceptions.
    Delete (Drag to Trash)  the com.apple.soagent.plist and com.apple.messageshelper.AccountInfoController.plist
    Restart the Mac (I have not worked out is SOAgent launches when the Mac does).
    Restart Messages.
    If this does not work navigate to ~/Library/Preferences
    In here find and Delete com.apple.ids.service.com.apple.madrid.plist
    This will need a Restart of the app.
    You will be asked Again for your Apple ID
    9:28 pm      Sunday; January 26, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT201320 MY NEW IPHONE 5 SAYS UNABLE TO CONNECTION TO SERVER..FROM MY EMAIL

    I'm unable to connection to  my email from my new iphone.

    Did you go to settings to set up your email account or
    did you have an iPhone previously?

  • Apple TV 2 Waiting for network services, unable to sign in to iTunes store

    Received my Apple TV yesterday.
    It is connected to my network (I have tried wired and wireless).
    I can view movie previews and Podcasts.
    I cannot sign in to the iTunes Store (therefore cant rent movies), cannot view Youtube videos (No content available), cannot use Netflix (Waiting for network services when I try).
    I spoke to Apple support, they couldn't help. They say the problem is with my network or my ISP.
    I have a Linksys WRT160N router, on which I have tried disabling the firewall.
    My ISP is Telus, I am on their Fibre Optic network in BC. I wonder if Telus are blocking Apple TV?
    Anyone else experiencing this?
    Message was edited by: gbcecanada
    Message was edited by: gbcecanada

    I received my Apple TV yesterday.
    I am running cable internet with 10Mbps constant.
    So I connected it up and proceeded to issue after issue. I could not log into my Apple account. It was stating that my name or password was incorrect.
    When I would start the unit it would stay at the waiting for network connections screen for several minutes!
    I did all the tricks of turning the apple of and back on, NO FIX.
    I tried to update the software, and I recieved a message that stated I have the most updated software, so....NO FIX
    I did a full restore. The Apple TV downloaded the newest software and rebooted after about 7 minutes, NO FIX
    I logged into my router and opened all ports, added ports 80 and 123, NO FIX
    I also disabled my entire firewall on my router and turned off the WEP security feature...and what would you guess.....NO F I X!!
    So I logged back into my router and reset all my original settings...still NO FIX.
    SO here is the good part...Apparently the system has to connect to time.apple.com and get updated...it's sort of like a verification of the system.
    So after it updated everything worked great! No unable to sign into my account. NO waiting on network connections anymore.
    So the biggest advice I can give, especially after my 3 hours of gradually wasting my time until I almost threw the unit out my bedroom window, is connect it to your WIFI system and let it sit by itself for a few hours and let it connect to the Apple server.
    Hope this helps everyone that, at some point, has shared my pain and frustration.

  • Unable to Sign In to Itunes Store

    I'm trying to set up Apple TV. I cannot connect to the Itunes store via ATV. Each time I try, I get an error saying:
    "Unable to Sign In - The Apple ID you entered couldn't be found or you password was incorrect. Please try again"
    I am also having difficulty accessing YouTube.
    I am able to connect to the itunes store via my macbook without any problems. I'm also able to download and view trailers and listen to music which have been synced.
    This is what I have done so far. I have done a reset, restored, unplugged and updated software. Still nothing. I'm connected to the internet using a Time Capsule without any added firewall software. Everything is apple and plug and play just isn't working.
    Any suggestions?

    I also have "accessing iTunes Store...." when I try sign in to my account....
    I can browse the store but not sign in.
    I have recently added a Netgear DGN2000 router.......... checked all settings to no avail
    If i swap the router for an alternative internet connection (a gsm modem - it works fine!)... maybe same problem?

  • Why am I unable to sign onto wayport at McDonalds?

    I am unable to sign on to Wayport at McDonalds using Firefox for Windows. I am able to do so with all other browsers - including Firefox 4.0 for Ubuntu 11.o4. The Error received is '''Zero Sized Reply'''

    recall it having problems with accounts you automaticly get with your google account so I made
    another one using youtube and that worked not sure if it's a general problem but read some people advice it

  • HT1498 when i got to rent a move it tells me that unable to sign in .  cannot connect to server.  what does that mean

    Can someone help me. I have gone to rent a movie as usual andit tells me that I am unable to sign in.  Cannot connect to server. try again later.  what does that mean
    does anyone have an answer please

    if other internet services such as youtube also don't work then it mean that your appletv don't have connection to the Internet
    it could also mean that apples server er busy or receiving service and will be up again later

  • Unable to Sign in  analytics After Upgraded obiee from 10g to 11g

    Hi all,
    I have problem when upgrading catalog from 10g to 11g.
    The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
    I upgraded following the steps like this:
    1.Login EM and check BI server is running successfully.
    2.Started the UA.bat.
    Select the operation:Upgrade Oracle BI RPD and Web Catalog.
    Step by Step,and the upgrade completed successfully.
    3.Open the RPD online using the Admintool succefully.
    4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
    5.Then I Try to Regenerating User GUIDs
    1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
    a. Open NQSConfig.INI for editing at:
    b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
    c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
    d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
    e. Save and close the file.
    2. Update the Catalog element in instanceconfig.xml:
    a. Open instanceconfig.xml for editing at:
    b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
    c. coreapplication_obipsn
    d. Locate the Catalog element and update it as follows:
    e. <Catalog>
    f. <UpgradeAndExit>false</UpgradeAndExit>
    g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
    h. </Catalog>
    i. Save and close the file.
    3. Restart the Oracle Business Intelligence system components using opmnctl:
    4. cd ORACLE_HOME/admin/instancen/bin
    5. ./opmnctl stopall
    6. ./opmnctl startall
    7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
    Important: You must perform this step to ensure that your system is secure.
    8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
    9. Restart the Oracle Business Intelligence system components again using opmnctl:
    10. cd ORACLE_HOME/admin/instancen/bin
    11. ./opmnctl stopall
    12. ./opmnctl startall
    BUT THE ERROR ALSO EXISTING!
    So,waiting for the help,thanks!

    Hi,
    if your using oracle db please make sure your db settings and tnsnames.oRA settings
    also try you please try below troubleshooting steps:
    1) please check latest error message and find the root cause,
    presentation catalog log path:
    obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
    also check it nqserver.log file
    oracle bi server log path ref:
    obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
    2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
    if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
    e.x:
    C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
    opmnctl startall: starting opmn and all managed processes...
    C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
    Processes in Instance: instance1
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
    coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
    coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
    coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
    coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
    3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
    check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
    view physical data.
    also paste it your latest error log message (nqserver.log and sawlog01.log message) here
    THanks
    Deva

Maybe you are looking for