I am unable to update ios new version as it is asking for passcode. I am trying to submit the password, it is not accepting on my iphone5S

Currently using iOS 7.1.1
For longtime trying to update to 7.1.2
I am unable to install it, as it is asking me for Passcode.
Is passcode different from my Apple ID Password?
I tried to put the pass word, it gives me failure notification
Because of this also changed Apple ID Pass word recently

The Passcode is NOT the password for your Apple ID, the Passcode is the four digit number you enter to unlock your phone after it has auto locked.

Similar Messages

  • I have forgotten my passcode for the locked screen on my iphone6 and have already restored the phone as new.  It is still asking for passcode...what do I do now?

    I've forgotten passcode for screen on  iphone6.  I have also restored the phone as new.  It is still asking for passcode.  What can I do now that I have not bee given a chance to set a new passcode?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT1414 after installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

  • I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

    I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

    Hi Rosera,
    This is bad and I am sorry to hear that you are running into these issues.
    Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
    It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
    Have you tried the steps mentioned below by Barbara?
    If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
    Regards,
    Ankush

  • I recently created a new Appleid and then the password to my old Appleid suddenly did not work.  When I tried to reset the password I do not receive the email with the link and Apple does not either recognize my birthday.  What to do?

    I recently created a new Appleid and then the password to my old Appleid suddenly did not work.  When I tried to reset the password I do not receive the email with the link and Apple does not either recognize my birthday.  What to do?

    Hi ingaosk,
    Thanks for the question. Based on what you stated, it seems like you did not receive the reset email. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    If you didn't receive your Apple ID verification or reset email - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • I have a new 5s iphone my fingerprint and the password it is not accepting what to do next

    I have a new iphone 5s mu touch id and the password entered is not working what to do next?

    I have found that it's a fake. And to make matters worse, I was just 2 weeks outside the time for my credit card company to remove the charge.  So now I feel victimized twice. There are 2 available on amazon, but could also be fakes. At least I will know right away this time. Thank you for trying to help.

  • After updating to new version of Firefox, my paid for RoboForm will not work. What should I do? I MUST have it working. Thanks Jane

    Yesterday I downloaded the new version of Firefox as suggested by you. Then my paid for version of RoboForm , which always has worked, would not work. I MUST have it working. What can I do now to solve this crucial problem? PLEASE send detailed info so I can follow exactly. Thanks, Jane P.

    You need version 7 of RoboForm for Firefox 4. Version 6 will only work with Firefox 3.6.* or earlier.
    If you have version 6 this may be viewed as a method to generate income by Roboform in forcing users to update to version 7 and not offering updates to version 6 to make it compatible.
    An alternative free password manager that works with Firefox 4 is Lastpass - https://addons.mozilla.org/firefox/addon/lastpass-password-manager
    If you have version 6 of Roboform and need to use it you will have to downgrade to Firefox 3.6
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • After update to iOS 4.2.1, iPod is asking for passcode. what is it?!

    I have never set any security on my iPod Touch. But I have just updated to iOS 4.2.1 and, after the update completed, my iPod is now asking for a passcode when I "slide to unlock". What is the default passcode?!

    snakes527 did you notice that the post is about 3 1/2 years old? The poster already said that he got it working.  Also, most posters never mark their post as solved.
    Further, there was no FindMyiPod in iOS 4.2.11
    snakes527 wrote:
    THE PASSCODE IS WHATEVER PASSWORD YOU MADE FOR THE 'FIND MY IPHONE/IPAD'

  • New PC asks for authorization and I don't know the password

    I purchase a new PC for my wife and transferred the itunes library via an external drive.   I then auhorized the new computer on her account (she has about 2,300 songs).  When I tried to sync her ipod, it came back and said that 221 songs would be deleted from her ipod unless she authorized her account.   The authorization window came up and the Apple ID it prestored was an email account she had years ago that she no longer has.  My sense is that her ipod contains songs from 2 different itunes accounts.  She does not know the password of this old account.  I get prompted for "did you forget the password" and it says it is sending the password to the email address for the apple id.  Problem is that email address does not exist anymore so I am stuck.
    The best I can tell is that her old PC had both Apple IDs authorized and she has had that PC for years so her ipod and iphone has worked fine.  Any idea how to get into the old Apple ID if we don't have the password.  The other choice I see is to lose the 221 songs.
    Thanks

    Here's what you need to do. First plug the iPad mini into your computer. When you get the message about iTunes not being able to access the iPad because it's password protected, press and hold the power button and home button at the same time. Hold these buttons down all the way through the reboot until the apple goes away. After that you should a graphic of a USB cable and the iTunes symbol. When you see that release the buttons. Close out of the error message in iTunes. You should now be able to restore and update your iPad mini and set it up as a new device, or even restore it from your backup if you have one.

  • TS4036 I downloaded the ios 7 when I turned my Ipad on again it asked for a pastcode.I tried a few as I could did not remember my Code now my IPad has been disabled and as a senior I dont know how to get it back

    I downloaded the new ios 7 and when I restarted my Ipad it asked for a pastcode I could not remember a pascode and entered my apple id info. now my ipad is disabled and as a senior I don't know how to get my Ipad working again. Any suggestions?

    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • New ipad air opened up asking for passcode

    brought a new ipad air i have opened and tuened it on it it asking for a passcode.i havent set up a passcode. why is this?

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • New version of Logic constantly asks for serial on startup

    Does anyone have a solution for this?
    Thanks

    Ah, that's your problem. The FINAL CUT STUDIO SYSTEM ID file stores your serial so if the file isn't there, it's going to keep prompting you for it.
    This is most likely a permissions problem. Try going to /Applications/Utilities, open Disk Utility, select your system drive in the list and click Repair Permissions.

  • I updated ios 7 for my ipad .its asking for passcode.how toget it

    i updated my ipad software ios 7.its now disabled and asking for passcode.how to get passcode

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Maybe you are looking for

  • I am having some confliction between FX-5200

    Hello Guys, I want to know that what does a new driver has to do with modem that it makes noises like "click click" during the gameplay... Right now i am using the old version that came with the box.It is 43.45 that has been released almost an year a

  • SAP Connect Job Cancelling

    I keep having this same issue happening every couple of weeks where the scheduled workflow job SAPCONNECT ALL SEND will start canceling out with the error "Job canceled due to system shutdown". Usually when this happens there will be an RFC connectio

  • SQL Server 2008 + 2008r2 install

    Hello, I have SQL Server 2005 express installed on my Windows 2008 server I installed SQL Server 2008 express on my machine. I didn't add the tools - so I donwloaded and installed the tools afterwards. I accidentally downloaded and installed the SQL

  • Notification rule of type "system" in OEM 11g

    Having used OEM 10g I'm now using 11g. When I create a new notification rule one of the options is to use a type of system, as I have a system defined I thought "oh goody that will be useful !" unfortunately not as there is no option to add metrics p

  • Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!

    I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal