I am unable to update the iOS 2.2.1 to next version
i am unable to update the iOS 2.2.1 to next version
What happens when you connect to computer and update via iTunes?
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
You need itunes 10 or later and that requires OSX 10.5.8 or later
You have a 2G (vi the SN yo provided) and that can go as high as 4.2.1
Similar Messages
-
How do I update the ios on an iphone 4 from version 4.2.8 to the most updated verision?
How do I update the ios on an iphone 4 from versioon 4.2.8 to the most recent?
Plug your phone to your PC - open itunes - itunes should automatically see that your phone needs an upgrade.
Make sure you backup prior to updating.
YOu may also need to update your itunes. -
unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01followed someones instructions and it has worked ios 5 is now working on my iphone 4
-
I am unable to install the ios 5.1 to my ipod touch. I have tried over and over and get the message "unable to install update." My touch has 100% battery charge so I know that is not the problem.
Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
HT4623 My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest.
My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest. Need help. Thanks
connect ipad to computer, launch itunes and update from there.
-
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
-
1st generation iPad running iOS 5.1.1 and can't seem to update the iOS. Any ideas?
I currently have a 1st generation iPad that is running on iOS 5.1.1. I have been unable to update the operating system. In fact, when I look for updates under the general settings icon nothing comes up. Shouldn't this older iPad be running on iOS 7.0.2 like my new iPad? Also, I have 19 app updates that I can't even access. I'm assuming this is because iOS 5.1.1 is too antiquated, thus not meeting the requirements for the other apps to update. Thank you for any help or advice you can offer.
my ipad 1st gen when i go to update to ios 5.1.1 on itunes and run check update it says ios 4.2 is the furthest version? Please Help
-
Unable to update my iOS on my iPad and iPhone.
I am unable to update my iOS on my iPad and iPhone. Though I have had these devices and have been updating for over a year, the issue just started with this new release (iOS 5.1).
When I connect my Pad and Phone to iTunes (Windows PC with Vista), I am told that an update is available. When I update, iTunes tries to connect to a server. Then I receive the message, "There was a problem downloading the software for the iPad. The network connection could nopt be established."
When I try to update the devices iOS using WiFi directly (not connected to iTunes). The devices say, "Checking for Update..." and does not connect. It says, "Unable to check for update...An error occurred while checking for a software update...Cancel or Try Again"I solved this by downlading the iOS update via wi-fi at another location other than my home. I would still like to know why this download did not work at my home as it has for over a year. I have made no changes in my firewall or security settings.
-
Unable to update to ios 5.1 on windows
unable to update to ios 5.1 on windows on iPhone 4
My error message says "Unable to Install Update" 2nd line "An error occured installing iOS 5.1."
no specific error number/message.
With a generic one like that, it might be best to try working through the following document:
iOS: Resolving update and restore alert messages -
I was in Singapore when I created this Apple ID and payment information. Now I am have shifted to India and I am unable to update the Country and Payment related information. When I click on country no option comes up. Can somebody suggst anything?
Hi Peyush!
You may want to try changing the country associated to your Apple ID from your iOS device. I have an article for you here that I believe will help you change the country for your signed in Apple ID:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Specifically, this is the section of the article you will want to pay attention to:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
unable to update of iOS. it gives network connection error after downloading the software please help
If you are still having problems, try posting in the forum for your iOS device (iPhone, iPad, iPod Touch) - this is a forum for iWork applications, so people with the answers to your connection problem may not be looking here.
https://discussions.apple.com/community/ipad
https://discussions.apple.com/community/iphone
https://discussions.apple.com/community/ipod
Please make sure you search those forums before you post a question - someone may already have asked and answered your question. -
Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?
Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?
Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Preparing an iPad in Configurator without updating the iOS
Hi all,
I work on a research study that uses iPads and an app to collect data. The app is a third party app and will not work if the iOS on the iPads is updated beyond iOS 7.0.6. I was trying to apply a backup via Configurator to one of the study's iPads and I got the error message that Configurator couldn't recognize the supervision status of the iPad and that the iPad needed to update the iOS for Configurator to work. I did some research on the interent and it seemed like people who didn't want to update the iOS created a custom iOS in Configurator then prepared their iPads using the custom iOS. I unsupervised my iPad and dowloaded the ipsw I wanted and put it in the custom iOS folder in Configurator but it doesn't work. Everytime I hit the Prepare button I get the same error: Unable to install iOS 7.0.6, unable to restor device with firmware found at file:///Users/DailyDiaryStudy/Library/Containers/com.apple.configurator/Data/Li brary/Caches/com.apple.configurator/UnpackedFirmware/iPad2,3_7.0.6_11B651_Restor e.ipsw/.
Personalization failed, error codes 4027 and 3194.
I've done everything the Apple support website and other websites recommend but it still hasn't worked. I also can't find any file called Unpacked Firmware in the location Configurator gives in the error message. The iPad is already on iOS 7.0.6 and I don't know if that's the problem or the firmware is the problem or if it's something else. I tried preparing the iPad with 7.0.4 and the same thing happened. I only use Apple technology for work so I really don't know anything about it beyond what I've taught myself. I've done some internet searches but I haven't found anything helpful. One person got error code 4027 and did something in the Host file but I don't know what it was. I know updating the iOS would likely solve all my problems but like I said, doing so would mean I would no longer be able to use the study's app on that iPad. I'm using the latest version of Configurator and I'm running Mavericks on the Mac. Any help would be greatly appreciated.
Thank you.Another way to see this:
Apple offers half price apps. Configurator is not mandatory, but half price apps are almost useless to a school without Configurator.
Using Configurator means schools are forced to always use the most bleeding edge iOS.
==============================================================
Imagine if Microsoft offered half price apps to schools, but only if the IT staff forced everyone to use windows 8. Oh my...
This affects many apps. If you feel apple should not be so forceful and restricive please call and let them know you don't want configurator to force the new ios at the time of prep. (866) 752-7753 -
How can I update the IOS on my first generation IPAD? There is no software update option in my settings
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I am unable to update to ios 8.3 ..
I am unable to update to ios 8.3 over wifi....I keep on getting a message saying that an error occurred while updating. Can anyone offer any help?
I have exactly the same problem. Thanks for posting, and hope someone around are able to help with this matter,
Maybe you are looking for
-
"SERIOIUS ERROR" Message after updating to 8.1.2
I was having problems opening PDF's. Every time that I open a PDF, either in IE or Acrobat, it appeared for about 10 seconds, then disappeared. Immediately, I updated the application, to version 8.1.2. Now, every time I open a PDF, about 5-10 seconds
-
Can you move a single vertical line in a table in Indesign ?
Ok I have a very complex medical form with several rows and columns. The problem is that I want to move just sections of a column line and I can't seem to figure it out. Below is a screen shot of part of the form. The vertical line between 1st QA and
-
Cs3: batch capture in/out edits incorrect
OK - heres my problem. I have a hdv project which i captured dv files. Ive edited these in the timeline and now want to offline and batch capture as hdv. When i do this however many of the clips appear incorrectly on the timeline. they are slightly o
-
Hi all, Any pointers of documentation on Pricing in CRM 5.0.Let me know. TIA, Vijayata
-
How to use RMI Stub class in programming?
Hi all, I'm new on RMI. Is there anyone can explain to me how to use RMI Stub class which is generated by invoking rmic command? For my testing, I can only invoke rmi object nethod via its remote interface. Then what is stub used for when we are codi