I am unable to upgrade Camera raw8.6 and Bridge CC..Error 49

I am unable to upgrade camera raw for photoshop cc and bridge cc It gives error 49.Thank you for your help.

I have never used it but have a link Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
FIRST try resetting CC 2014 Preferences, Click the icon to start CC 2014 immediately if not sooner press and hold Shift+CMD+Option Photoshop should prompt asking if you want your Mac CC 2014 preferences deleted reply yes.

Similar Messages

Unable to upgrade Camera Raw with CS4 in Lion...

Hi All,
very frustrating; I have been unable to upgrade Camera Raw despite several attempts.
I've downloaded the latest version as an upgrade; I've done Software upgrades through PhotoShop, but for some
reason these do not seem to have taken, ie., the version of ACR in Bridge preferences remains 5.0.
This makes it impossible for the computer (a brand new MacBook Pro) to read or convert to DNG raw files
from a Nikon D300S.
Oddly, ACR 5.0 converts raw files from a D700 just fine.
Also puzzling is that my attempt to upgrade to ACR 5.7 in a 5 month old iMac have been smooth as silk (OS 10.6.7)
Help!
Stu Rosner

At one point, I was one of the most vocal critics of camera raw in the CS4 / Lightroom v2 days. In short, I felt that there was not enough control over noise reduction and fine detail rendition when processing digital camera raw files, especially at higher ISOs, although I had been quite pleased with earlier versions. That all changed when CS5 / LR v3 was released. You now have an enormous amount of control over exactly how much sharpening and how much noise reduction will be applied to an image. The amount of fine detail one can extract from a low-ISO raw file is extraordinary. When you crank up the ISO and an image gets noisy, you now can choose whether or not you prefer a smoother look at the expense of some of the more subtle texture details, or a slightly grainier look where one has a feeling that no significant fine details are lost from the original capture (what I prefer). The raw processing defaults in Adobe's latest software are good starting points, but for my personal tastes, I generally do modify them a bit with less NR and slightly more sharpening at a smaller radius.
Even out-of-camera JPEG files will benefit from the new processing engine. I find that turning down the sharpening and NR in-camera, and then applying some subtle tweaking in LR, for example, makes for much better looking images even when starting from a JPEG. If you are a raw shooter, like I am, then upgrading to the latest Photoshop and Lightroom is absolutely 100% worthwhile in my opinion!
I personally feel that the quality of raw conversions in Adobe's latest software are pretty much the best there are. I have used many other raw converters (Capture One, Aperture, RAW Developer, Silky Pix, Canon's DPP etc.), and while each have their strengths, overall I far prefer the look of the final image from Adobe's latest software. Sure, I might find the colour rendition slightly better, in some cases, from some other raw converters, but colour I can fix. Poor detail rendition or heavy-handed/crude noise reduction I cannot.
EDIT: Also should mention how good the lens correction controls are. Not only are there automatic lens corrections available (possibly of limited use with an M8 due to potential lack of lens EXIF information), but the manual corrections are extremely useful. Chromatic aberration, vignetting, highlight fringing and distortion control all work extremely well and are minimally harmful to image quality, unlike performing those same corrections in Photoshop after the raw conversion stage. You also have excellent perspective corrections that, amazingly enough, seem to have very little impact on image quality even when fairly dramatic adjustments are made.
Lastly, I own both Noise Ninja and Topaz DeNoise and since upgrading to Adobe's latest software, I don't think I have felt the need to use either of those two third party NR plugins once. Purely from a noise reduction standpoint, upgrading to CS5 or LR v3 is almost like getting a new camera, almost like moving from a cropped sensor to a full-frame as far as high-ISO image quality.
I would suggest you download Lightroom v3 and give the 30 trial version a whirl. Spend some time in the Detail section of the Develop module and make sure that for each image you are looking at, ones that you may have edited in previous versions of Camera Raw or Lightroom, that you have "2010(Current)" chosen in the "Process:" section of the CameraCalibration tab in Develop. That will ensure that you are fully benefitting from the latest raw conversion engine. Zoom in to 100% before you tweak the Detail settings to make sure you are seeing actual pixel-level detail. I think you may be amazed at what you can do...
Regards,
Mike Mander

Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore

So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..? Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful. I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week
CS6 running on windows 8.1

Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...?

Im unable to upgrade to firefox 26, i recieve patch error

When trying to upgrade firefox from version 23 to 26, the upgrade file downloads and starts to run and then i get an error about Error in the patch.

That happens sometimes when users skip updates. You can get the full Firefox 26 installation package here. <br />
http://www.mozilla.com/en-US/firefox/all.html

Cannot open RAW file from Canon 1DX in CS6. I updated Camera Raw, PS, and Bridge. Also, I do not now see how to determine the version of Camera Raw that is installed. I have Mac Pro 1,1 running Snow Leopard.

I

Thanks, ssprengel!
Updates did not install a version of ACR that would handle the files. I found the link to ACR 8.7 on another thread, but it wouldn't install on Snow Leopard.
Camera Raw plug-in installer
Fortunately I had an available install of Lion, and that did the trick -- ACR 8.7 is now installed and I can see my images! Thanks for your help.
cheers,
Bob

Tried to upgrade to iOS 5 and keep getting error message 1611.

I plug in my iPad and try to upgrade to the new iOS 5 and it restored the iPad and now I'm getting error message 1611 and it won't even let me use my iPad right now, it's stuck at the start screen with the sync cord and iTunes logo... HELP...

I had a similar problem -- but found a simple fixe here.
All I had to do was move my USB cable from a port on the side of my computer monitor to a port on the computer itself.
Easy!
Funny thing is, the original setup worked fine when I upgraded my iPhone 4 earlier in the afternoon, and I've synched my iPad 2 using it hundreds of times. But it wouldn't do the upgrade for the iPad.
Hopefully it will work for you too, and others that may read this thread.
-Tom in SoCal

Trying to upgrade to FireFox 4 and getting this error: The operation can't be completed because the item "libsoftokn3.dylib" is in use.

I am using a new MacBook Pro. I click on the "Download FireFox 4.0" button. The file(s) download and the dialog appears to drag FireFox icon into the Applications folder.
I get a dialog that says "There is a previous version.. Ok to replace?" I click "Replace".
Then I get a Copy dialog that says: "The operation can’t be completed because the item “libsoftokn3.dylib” is in use."
The software is not updated and I am still on FireFox 3. I tried rebooting and doing it again - I get the same results. I also did a web search and was not able to find a solution to this error.

I had success by:
1- Quit Firefox
2- Go to the Applications folder and drag Firefox to the desktop
3- Install Firefox 5 (it installs successfully at this point)
4- Put old Firefox in the trash
5- Secure empty trash
It may be possible to just drag Firefox directly to the trash and use regular Empty Trash, but I did not try that. Some people on the net reported that they could not empty the trash after putting the old Firefox in the trash (got the same "libsoftokn3.dylib is in use" error), so I just tried Secure Empty Trash, which may be no different from a regular empty trash as far as this goes; not sure as I'm a bit new to the Mac.

Error message 2038 - unable to download books to 'Editions' and getting this error message

I've bought 5 books over the past week and they will not download properly into Editions. The opening window shows the orange line moving across, indicating a down load and then a window opens with this error message:
Gone Tomorrow:
IO Error on Network Request.
Please check your network connection and try again.
Network Path:
http://174.129.224.52/pdf/000/000361/000361021.pdf
Event Detail:
Error #2038
--- end ---
Can anyone help please??? Cannot use the Sony Readers at all at the moment as a result - they cost a lot of money!
Best regards.
Grahame 66

Repair your Apple Application Support.
Restart Computer, go to Control Panel/Program and Features/highlight AAS and click REPAIR button.

Upgrade of PS CC and Bridge CC does not work

For both I get the same message :
When I click Retry (Réessyer) the same message appears again.
When I clidk on Infos, I get the following message :
Which means error of downloading.
Apparently the download does not start anew.
Reynold Jaquet

Reynold Jaquet please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download error 49.

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

? CS5 Unable to Update Camera Raw or Bridge

Adobe support case #0181633618
I spent over three hours on the phone with Adobe's technician, and the problem is unresolved.
We un-installed CS5 Photoshop and reinstalled it as a "new user." Install stopped midway to say there was an ISP problem. We chose the option “install anyway." This message was the same on the initial CS5 installation. I upgraded from CS4. Never a problem with CS4.
Turned off all antivirus and firewall software.
Could not find other Photoshop applications running while watching the Task Mgr.Processes.
We manually download the updates and also let Photoshop Updater download them.
Photoshop starts and runs fine, but will not update Camera Raw and/or Bridge.
Error message: "another version of Updater is running. Try again later."
Thanks,
Bob

There are comprehensive answers in the Camera Raw forum and Bridge forum.

I'm trying to upgrade to Mountain Lion and I get an error message that says "server error during download; 403 forbidden. What does this mean, what can I do? I had no problem downloading Lion.

Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.

403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such?

No Camera Raw enabled in Bridge

Running CS6 on a Mac Mavericks. When I click the Camera Raw iris in Bridge this error occurs. "Not enabled. Camera raw editing requires that a qualifying product be launched to enable this feature." I have opened Photoshop which does read raw (DNG) images. But Bridge won't?

You have to launch Photoshop and open at least one raw image through that application.

Upgrading to iso 5 and receiving error message "the network connection timed out" and won't complete the update. How do I fix to complete the upgrade?

Upgrading to iso 5 and received an error message "the network connection timed out" and fails to complete the upgrade. How do I complete the upgrade?

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

I am unable to upgrade Camera raw8.6 and Bridge CC..Error 49

Similar Messages

Maybe you are looking for