I am using 3gs 16gb after IO5 installation my device is very slow. Do i have chance to downgrade Io 4.3???

i am using 3gs 16gb after IO5 installation my device is very slow. Do i have chance to downgrade Io 4.3 any version???

My iphone 3Gs is also painfully slow since upgrading the software.
Has anyone got any idea how to downgrade to the version 4???? It worked fine then!

Similar Messages

Yesterday CC updated and after that the application is so very slow that I have to cancel the app via Task management. What can it be?

Hello,
Yesterday I've updated CC via the Update manager. After that the program does not perform anymore. The only option left is to end the task via the Windows Task manager. At a certain moment it stops and stays quit.

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

My wife has a 3GS Iphone, if she installs the iOS5, will it be able to have and use imessage?

My wife has a 3GS Iphone, if she installs the iOS5, will it be able to have and use imessage?

ios 5 features http://www.apple.com/ios/

've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

I've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

After an update or installation, your MBP may take some time to index its files. Give it some time - but if you don't see any improvement, post here - you'll get an answer!

After installing maverick my computer is very slow

after installing maverick my computer is very slow, what can I do?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Compaq sr1320nx /win xp after keystroke/command, the system is very slow 10-15 secs. before response

after keystroke/command, the system is very slow 10-15 secs. before response

What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy. It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated. Every click would take at least 5secs to respond... and then the spinning ball comes up.
It's only after the same app was used, then it would be smooth. For example, I run my cursor down to the bottom of the screen where my dock is hidden. It would take a few times of running down before the dock shows up. From that point on, it would would work nicely unless I click on any of those apps in the dock. Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail. It takes more than 5secs before mail pops up. Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up. From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
So, I keep running disk utility almost everyday and now, it works 99% of the time. If it slows again, I run the disk utility. I guess that's the way to go until they come up with a proper fix.
All this housekeeping work reminds me of Windows and the endless defragging and optimising. That was one of the few reasons why I switched to Apple and now...
Dear Mr Steve Jobs, please send some enlightenment to your Apple teams!

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After update to Lion Numbers became very slow and clumsy.

After update to Lion, Numbers works very slow and clumsy. Any solution to fix this problem?

Don't know about being "slow" - I've always felt it was slow. I could run Office XP (maybe 2000 - not sure) on an 133 mhz Pentium and it was faster than Numbers on my late 2008 Aluminum MB.
But I've had other issues under Lion with it. It seems whenever I first go to my spreadsheets after the computer has been asleep - even if it is some time after waking it up - and start to enter some numbers, I'll get a beep and see that what I tried to type didn't come out right and I have to do it again.
I was wondering if it was something to do with the auto-save versions maybe kicking in when I first start to enter info, but before I finish the first entry.

After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?

After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
Model Name: MacBook Air
Model Identifier: MacBookAir6,1
Processor Name: Intel Core i5
Processor Speed: 1.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB

Hi ..
Better to troubleshoot Yosemite.
Not enough free storage space can slow your Mac down.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space. OS X Tips Where did my Disk Space go?
As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

Upgrade FCPX

After 10.5.2 update, computer very slow

Downloaded/installed update without incident. Microsoft Office programs are now very slow to open and very slow to perform certain tasks, like trashing an email. Emptying trash in the Finder sometimes works/sometimes doesn't. When it doesn't, I get a dialog box saying "You can't open Trash because Trash is being emptyed" or words to that effect. Force quitting hung aps usually does not work. It is sometimes possible to shut down or restart using the commands in the Apple menu but I've had to just power cycle the computer twice today when the commands didn't work. I tried verifying permissions but even that seemed to hang. Verifying the disk worked and it says the disk is ok. Any ideas on how to solve this? It almost feels like I've run out of memory but Activity Monitor says otherwise. Stumped.

I had some of the exact same issues. After I installed the 10.5.2 update and noticed these issues, I ran Software Update again and found a "Leopard Graphics Update 1.0".
http://www.apple.com/support/downloads/leopardgraphicsupdate10.html
Once I installed this graphics update, my computer was back to normal.

After installing lion my macpro is very slow

After installing lion my Macv pro became very slow. takes long time to start ad to shoot down. Is there any fix for this?

Lion does best when you do a clean install on a new drive, then use Setup or Migration Assistants.
You're going to have to show / ask what old stuff you carried over from before most likely.
Then again, people complained when Snow Leopard came out. And before that there was...
To say it starts and shutdown more slowly is the surface superficial and doesn't say how installed, what, even the model Mac Pro and how it is configured.
You are going to want to use Safe Mode and Lion Recovery and backups for starters most likely.
reset SMC For "Mac wont' turn on or boot" and related
https://support.apple.com/kb/TS1367
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form

IPhone 3GS updated to 5.0.1 now running very slow?

I updated my iphone 3GS to the new system 5.0.1 and now it is very slow and sometimes I have to tap an app several times to get it to respond? Do I need to go back to the old version and can you?

I'll go backwards with my response.
Having restored my phone and reset all settings, operated phone as a new phone, didn't sync anything back onto it, etc., I installed only Tune in radion and it didn't play. I wiggled the dock cable about -the volume indicator kept changing and for a brief moment sound played. But, not for long.
I am thinking that there's something wrong with the dock connector.
Previously I had:
Checked all settings, plus switched off Bluetooth - didn't work.
cleaned headphone socket and switch on side which mutes sound - didn't work.
Restored the phone, without restoring any of my backed up data. Tested phone as a new phone - didn't work. Tried:
      voice memo - this was fine
      changing ring tones - this was fine
      playing a song from iTunes store - not ok.
      As a New Phone, installed one App - Tune In Radio - no sound. Get speaker icon at bottom, but no indication of its setting. When I click on sound mute on/off switch at side of phone, above volume controls, I see volume level, but can't control it.
Reset all settings, so had to switch of bluetooth again and re-enter WIFI. No affect on sound.
I've tried the above with and without headphones.
So, after much time wasting, my Music App and Tune in radio apps don't work, but ringtones and voice memo works.

After software update macbook pro works very slow and no applications will open

Updated software today, since software updated macbook is running really really slow (approx. 4 mins from pushing the power button to home screen) and no applications including itunes will work. Anyone any ideas???

kBirr wrote:
Tried this, to no avail, applications (itunes, pages, iphoto) still won't open & MacBook still running very slow
thanks anyway
Did you restart your computer after repairing permissions?
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Your system info says:
MacBook Pro
Yet, in your postings you say: "MacBook" which is an entirely different computer. Typo? Are you in the correct community area?

After upgrading Yosemite my imac become very slow in power off!!!

Hello, i have this problem: after upgrading to yosemite my imac (27" 8gb intel i5) become very very slow in power off!!
Every other function are ok...only power off is very slow!!
I try to reinstall, to exit from iCloud, verify permission of disk and clean with application like ccleaner...but the problem remain!!
Anyone have my same problem? How can i fix this?
Thanks to all.

Uninstall Avast and CleanMyMac2.
Avast Un-install
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

I am using 3gs 16gb after IO5 installation my device is very slow. Do i have chance to downgrade Io 4.3???

Similar Messages

Maybe you are looking for