I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

You are a genius! Thank you so much; my LG HBS700 now works with my iPhone 5. It is so wonderful that there is this facility for people to help each other. And it is so agrivating that there are these mysterious, unexplained, magic tricks necessary to make my phone work. Do you happen to know how the button combination resolved the Bluetooth issue? What was the Bluetooth problem and how did this fix it. Again thank you for passing this on.

Similar Messages

Using the magnify button in Ancestry.co.uk, the cursor will not move away from the actual record window. The only way to exit is Alt F4 which closes Firefox. When reloading, Firefox reactivates the same record but without the magnify button activated.

The magnify also does not function properly.

There is an easier work-around. Rather than closing the browser, completely, you just have to get the system to change the focus. You can do this by pressing ALT+TAB (to switch windows). Then, you can turn the magnify option off and just go with the Zoom. (There is a secondary problem, in that the last magnified section of the image stays magnified. Going back to the record and then back into the image will clear that. But at least you don't have to close the entire browser!)

I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code). Works fine from the Iphone as such. When I connect my Iphone in Bluetooth to my car, only the phone

I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code).
Works fine from the Iphone as such.
When I connect my Iphone in Bluetooth to the voice-driven system in my car (Mercedes C), only the phone number appears to be transmitted. Entering a conference call number via the Iphone while driving is not a good idea.
How can I fix this ?

That *****. I sell electronics on ebay. Before listing them, i have to test and clean them. I have worked with microsoft Zune, you could sync via wireless through the network to your host computer.
i was hoping Apple would add that feature or the ability to connect to my computer via WiFi or Bluetooth and sync it wirelessly... It would be sweet to have the bluetooth and wireless opened up so you can do more than just connect to headphones or a headset...
I upgraded to the iPhone 4 this past december, i am on replacement # 2 or my 3rd iPhone 4... I was hoping for some upgrades in quality. Also being left handed, it seemed to drop many calls and give me very poor reception. i added a Griffin Elan Form Graphie case that covers all but the front, top button, bottom speakers and volume control buttons and the call and reception quality has improved. But I sure would have loved to see some improvements in the quality and function of the phone...
Thanks for your input, i really appreciate your replies...

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??

Using more than one camera at the same time..

Hello every body..
I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
I hope that any one can hep me..
I post this problem previous but i don't have agood answer i want to knew if this problem can be soved or not and if can be solved How???
The problem:
If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
I don't know how i can solve this problem??
please help me !!
For reply or any information contact me at my e-mail
[email protected]

Please Help me .....!!!!
If the Sun Community Forums don't Help me who will help me at my problem??????!!!!!
Help Me!!1

My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

Can I have multiple iPhones with unique back ups using one icloud account?

Hello forum users,
Can I have multiple iPhones with unique back ups using one icloud account?
I would like to back up and restore 4 different iPhones, 1 iPad, a MacBook and 1 MacBook Pro using the same single iCloud account.
If so, how is this done?
Many thanks

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

I'm using a Dell Inspiron 7520 ... pretty new. Sometimes when I download a CD / album to my library acouple of tracks get separated away from the main group. I've tried to click and drag the stragglers over to the main group but it doesn't work. Any Ideas

.When installing a CD/album into my library some of the tracks get separated away from the main group of tracks. I try to click and drag the stragglers to the main group but it doesn't work. My laptop is using Windows 8. My old XP laptop didn't have this problem. I'm not sure if that has any thing to do with it. Any ideas would be appreciated. It's more of an irritation than a problem but if it can be solved, it would be a good thing. Thanks! Paul

Hey Paul,
If I understand correctly, it sounds like iTunes is not grouping the songs from a particular CD together. The cause could be something as minor as a misspelling or slight variations. For more information, see the following resource:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks,
Matt M.

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!!

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG ‏69 KB

Use more than one transition in the same time between two video clips?

Dear Premiere Pro programmers,
Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
Message was edited by: Kevin Monahan
Reason: Next time, create a more descriptive title.

Hi Aqsa Nori,
I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
Thanks,
Kevin

I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

Similar Messages

Maybe you are looking for