I am using a Imac 10.6.8 When trying to burn a program in I DVD .
When I try to burn a DVD-R in IDVD ,The prosess may take 1-hour to burn , 30 minutes into the burning process it begins to multi-plex and my DVD is ejected and not completed ?? Help please !!! Thank you .
In addition to Bengt's suggestions follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT
Similar Messages
-
When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8
What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's? -
I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly appreciate it! Thanks!
Downgrade OS X Lion To Snow Leopard [Video How-To]
http://www.cultofmac.com/110614/downgrade-os-x-lion-to-snow-leopard-video-how-to /
How To Downgrade OS X Lion To Snow Leopard: The Complete Tutorial
http://www.redmondpie.com/how-to-downgrade-os-x-lion-to-snow-leopard-the-complet e-tutorial/
How To Downgrade from Apple OS X Lion to Snow Leopard
http://www.pcmag.com/article2/0,2817,2389334,00.asp -
I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy -
Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?
Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far... -
Hi Lightroom 4.1 running on iMac (Mountain Lion) crashes when trying to print
H
Lightroom 4.1 running on iMac (Mountain Lion) crashes when trying to print. No problems printing from Photoshop CS5. Any help out there!Which printer? You've checked your printer manufacturer's website for an updated driver I assume?
-
Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?
Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.
-
LR can not sync with my iPhone,, ( I have IMAC 10,9,3)
When trying to sync I can not connect?
When trying to connet.
1, Click on get started with LR Mobile,
2, Logg in,
answer attempt tp index a nil value?Have you tried this workaround? ....Error: "Unexpected Sign in failure...nil value" when syncing to Lightroom mobile | Mac OS
-
I have read all of the other postings and they haven't helped.
When I ran diagnostics here is what I got:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron 5720
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0015B7001238F790
Current user is not an administrator.
The current local date and time is 2013-08-11 10:02:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2a1c5ee63a68f4be6bc96c5266eed869
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: iaStorF (11.5.0.183),
UpperFilters: GEARAspiWDM (2.2.3.0),
D: PLDS DVD+/-RW DS, Rev
Audio CD in drive.
Found 11 songs on CD, playing time 42:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:52:30
Track 3, start time 06:59:54
Track 4, start time 11:40:47
Track 5, start time 15:15:38
Track 6, start time 19:31:39
Track 7, start time 22:52:55
Track 8, start time 26:38:36
Track 9, start time 30:28:61
Track 10, start time 33:35:27
Track 11, start time 38:20:39
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: PLDS DVD+/-RW DS on CDR media at speed 24X.Hello Princess Lynne Anne,
Thank you for using Apple Support Communities
First I recommend taking a look at this article named iTunes: Music purchased from iTunes Store cannot be burned to MP3 format CD found http://support.apple.com/kb/TS1476.
Songs purchased from the iTunes Store may either be in AAC format or AAC Protected format depending on when they were purchased (older songs used AAC Protected format). You can convert AAC songs to MP3 format allowing them to be burned to an MP3 format CD, however AAC Protected songs can not be converted. You can, however, back them up to a data CD or DVD, or you can burn them to an audio CD (which can be played in a CD player).
And if your issue still persists after converting any of these purchases, then I would recommend this part of the article named Disc Burning Quick Assist found here http://support.apple.com/kb/HT1152#learn2:
Top troubleshooting tips
In addition to the following tips, check out these articles:
Solving problems with burning discs
If the disc burning options are dimmed or unavailable
If a burn does not succeed, check the disc or try another disc
Eject the disc from the drive and inspect it to see if the surface is dirty or scratched, or if it already has data written on it (the shiny surface is slightly darker where data has already been burned). If it's dirty, wipe it clean with a soft, damp cloth and try burning again. If the disc already contains data, try another disc. If you're using a rewritable disc that already contains data, be sure to erase it before burning data on it again. Small flaws or surface inconsistencies can cause an unsuccessful burn. Try burning your content to another disc or try a different brand of disc (if possible).
Make sure that your optical drive can record discs
If your drive is built into your Mac, make sure that you have at least a Combo Drive if you want to burn a CD or a SuperDrive if you're trying to burn a DVD (or CD). Consult your Mac manual or your third-party manufacturer's disc drive manual for more information.
Check the disc type
Make sure that your disc drive is capable of writing to your media at hand. For example, you won't be able to burn a DVD+RW disc with an older Apple SuperDrive. Consult your Apple or third-party product manual for your drive's supported media specifications. You should also use discs that are rated for the burn speed of your drive.
Slow things down
In the Burn dialog, specify a burn speed that is slower than the maximum speed rating for your disc drive (if you can) and try burning another disc.
Free up some memory
If you've got other applications open, quit the ones that you're not using (or quit them all except for the one from which you're burning your disc). Allow the disc to burn before doing other things on your computer.
Check your hard drive's available space
When you burn a disc, your Mac temporarily sets aside an amount of hard disk space equal to the amount of data being burned to the disc. If you're burning a large amount of data, you may run out of room on your hard disk if it's almost full, which may prevent a disc from burning. To free up space, throw out unwanted files or back up files to an external drive.
Restart your computer
Sometimes a simple restart can resolve issues. Once you've restarted your Mac, try burning another disc again.
Update your software
Use Software Update (from the Apple menu, choose Software Update) to check for, download, and install the latest versions of your Apple software. If you're using a third-party burner, visit the manufacturer's website for the latest software updates for your model.
Check your connections
If you're using an external disc writer, make sure that all of your cable connections are secure and that the optical drive is powered on.
Cheers,
Sterling -
Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all. The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
Thanks in advance for any help.Skip the iCloud sign in for now.
Once you reach the home page, go to settings and sign out of FaceTime and Messages. This should also sign you out of iCloud.
Go to iCloud in settings and sign in with the correct Apple ID.
If that does not work
Skip the iCloud sign in
Go to Apple ID.apple.com and sign in
Change your Apple ID to the old one
Delete iCloud account on your device with the old Apple ID and the same password.
Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
Sign into iCloud on your device with the correct Apple ID and password -
ITunes - new iMac freezes & beach balls when trying to sync iPhone 3
I have a new iMac running Lion. When I try to sync my old iPhone 3g, iTunes freezes with the dreaded spinning beach ball for ever! When I do connect the iPhone, iTunes recognizes my phone in the list, but does not ever give me the option to even erase all my old content. Stranger still - when I get tired of the beach ball spinning and disconnect the iphone, the itunes list briefly displays all my iphone content (playlists, etc.) and then goes away. We have successfully synced a very old ipod shuffle (after wiping its contents) to new Imac, so cables, etc are not the issue. we did have to de-authorize all computers to get new Imac going, perhaps a clue? I have backed up the iphone to both an old mac mini (where it still syncs flawlessly) and have migrated data to new imac so I could recover. I am willing to lose iPhone data so I can sync. I am too cheap to buy newer iphone as it still works great.
my thoughts:
1. erase all content on iphone and then try to sync?
2. grumble and get new iphone?do you guy's fix the problem?
-
Error 4450 when trying to burn audio cd....used to work fine with older version of ITunes....
Is Itunes not compatible with windows cd burner.....
I'm having the same problem using 700mb cd-r, but when I try to burn smaller size playlists (300mb) it works fine. I know that when burning as an audio cd the tracks about double in size, so this makes sense. However when I try to burn a playlist 400mb (ends up as 800mb on audio cd) itunes burns most of the songs but errors out on the last few. My guess is the cd runs out of room because itunes thinks it's a 800mb cd and tries to burn that much to it, when in reality it's only a 700mb cd. itunes will actually try to split a playlist that comes out to 1200mb across 2 cds, but still tries to burn 800mb per cd and errors once the cd runs out of room before it has 800mb on it. There needs to be some way to tell it the size of the cds, or at least an update where they fix the size detection. In the mean time it looks like we're stuck with manually splitting playlists so they're smaller than 350mb (if you have cds a different size than 700mb then just keep the playlist below half the cd's capacity).
-
IMac Duo shuts down when trying to encode a DVD for burning.
Last night my Imac Duo 17" with one GB of memory shut down and wouldn't eject a DVD after encoding and burning a DVD with iDVD. The upper LEFT hand corner of the iMac was very hot to the touch. I checked the temperature with CoreDuoTemp before it shut down and it read 170 degrees F.
On restart...all I got was a white screen...without the ability to get a startup screen or eject the DVD.
This morning...after leaving the machine on for about five minutes...the DVD ejected itself and I got a startup screen. Now everything seems to be working fine. It seems to me that the machine shut down because of the heat.
I reported this to Apple and they said that even if I had applecare they couldn't do anything without a specific hardware issue to report and probably wouldn't repair it. They said that overheating and shutting down wasn't enough to request a repair. That the machine was too hot to touch in the upper left hand corner didn't seem to concern them.
This makes me wonder if it's worth getting Applecare? What has happened to Apple that an overheating problem doesn't merit a repair or replacement of a two month old iMac?
Does the machine have to actually start on fire before they will do anything about it?Hi,
3rd party extensions are often a source of problems, so try removing the extensions you currently have installed (highlighted below):
0x291000 - 0x291ffd +com.yazsoft.SDEnhancer ??? (1.0) <a571737d639a52de7729e512a4a30cdf> /Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/MacOS/SpeedDownloadEnhancer
0x2d4000 - 0x2d4ffd +net.bti.ConciergeLoader ??? (1.0.2) <3824608b5cd9864fad7e8c0381c1166f> /Library/InputManagers/ConciergeLoader/ConciergeLoader.bundle/Contents/MacOS/ConciergeLoader
0x612000 - 0x640fff +net.bti.Concierge ??? (1.4.11) /Library/Application Support/Concierge/Concierge.bundle/Contents/MacOS/Concierge -
I am trying out Photoshop CC specifically the 3D facility but every time i go to 3D I get "Could not apply the workspace because the disk is not available"
I have searched online for answer but cannot resolve this, can anyone advise?
regards
Drew.I am using a MacBook Air
Model Name: MacBook Air
Model Identifier: MacBookAir6,2
Processor Name: Intel Core i7
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB -
i purchased my imac 6/07 ... model 6,1 it has 4 gb ram and plenty of free space, also connected to time machine for backup. currently have latest lion os 10.7.4.
when i went to upgrade i get a model not supported message? what spec or device integral to my model is holding this back? can i get around this or am i just at a brick wall? would like to upgrade if possible? have a 2.33 ghz intel core duo processor, 4 GB 667 Mhz DDR2 SDRAM
anyone know what is going on with apple and this model, wife has last years mac mini and it's upgrade went off without a hitch
thanks !Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
From what i've read elsewhere, your older model of iMac has a CPU and logic board that partially runs in 32 bit mode at times. Mountain Lion requires that they run Exclusively in pure 64 bit mode. Yours cannot be made to do that.
Hope this helps
Maybe you are looking for
-
How do i know an airport card is installed & not working or not installed?
My Mac details are: Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Number Of Processors: 2 Total Number Of Cores: 4 L2 Cache (per processor): 4 MB Memory: 2 GB Bus Speed: 1.33 GHz I've a
-
How do I get the byte size of a server file before sending output via HTTP?
I need to get the byte size of the file prior to streaming it. I can't seem to find a class/method I need. Basically, I have the path c:\\tomcat\\webapps\\documents\\sample.pdf in the servlet, I was hoping I could just use something from the File cla
-
"The disk you have inserted is not readable by the computer"
I get this error on startup of my new mac mini. I believe the error is that I was time machine backing-up to a drive that no longer exists. It still lists in time machine from system preferences, but I cannot remove it from the listing of backup driv
-
How to enable rear speakers (old creative ca
i've a quite old sound card by creative and i am using Windows XP. the sound card name displayed in device manager is 'Creative AudioPCI' and in sound settings through control panel its name appears as 'Creative Sound Blaster PCI' i've creative inspi
-
i have two tables asset and feature.whenever i insert data into feature the trigger should automatically retrieve the asset_id from asset table and insert it. these are the tables. SQL> desc feature; Name Null? Type ASSET_ID NOT NULL NUMBER(11) SITE_