I am using a LMP Bluetooth keypad and it started to use batteries up every three days?

My LMP bluetooth key pad started to use batteries up every three days, never use to do this. Is it broke? The batteries use to last for months, not days.

Ask the keypad manufacturer for assistance.
Barry

Similar Messages

Cannot get LMP Bluetooth Keypad to work

I cannot get my LMP Bluetooth Keypad WKP-1314 to work. I get it paired just as the instructions say, and it says it's connected in the bluetooth menu, but then when I try to use it it does not do anything. Can anyone help?

I'm having the same problem. I take mine back and forth in my backpack and started turning it off to conserve battery. I turn it on before powering up my MBP. The light blinks amber (seraching/connecting) but always times out and I have to setup it back up every day. Annoying as ****. Fresh batteries don't change this either.
Really wish Apple would make a wireless keyboard with built-in keypad!

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode?

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode? Grab a drink and let me tell you my story.
I purchased two computers... an iMac 27" i7 3.4 16GB RAM and a Mac mini 2.3 i5 8 GB RAM. Both have Thunderbolt capability and are in fact connected by thunderbolt. I have 3 problems...
1. My Mac mini WILL NOT recognize any bluetooth keyboard. Let me back up for clarification. I set my iMac up first. No problems there. I then went on to set up my mac mini. A couple of interesting things happened concering bluetooth activity. First thing is that the keypad, which was already paired with my iMac wouldn't be recognized by the mac mini, and yet my bluetooth mouse which was paired with my iMac became paired with my mac mini and thus wouldn't be recognized by my iMac anymore. I had to go to my back room and dig out my other bluetooth mouse so that my iMac would at least recognize my second mouse. So now I have two "mice"presently. One for the mac mini, the other for the iMac. Thankfully I also had a USB keypad for my mac mini. My bluetooth keypad is still paired with my iMac but won't pair with my mac mini, which brings me to another question....
2. CAN 1 KEYPAD AND 1 MOUSE PAIR WITH TWO DIFFERENT COMPUTERS SO THAT WHEN I GO INTO TARGET MODE VIA THUNDERBOLT I CAN USE THE SAME KEYPAD AND MOUSE FOR BOTH COMPUTERS? Anybody have some thoughts on that problem?
3. WHY IN THE WORLD IS MY MOUSE CURSOR DISAPPEARING EVERYTIME I EXIT TARGET MODE VIA PASSWORD AND COMMAND F2. I'm using target mode to access my mac mini. But when I exit target mode to get back into my iMac I'm looking at my iMac screen but I can't see the mouse pointer! I can move the pointer around even though I can't see it. Wierd. And this has apparently been going on for some time with other users for over a year. I am presently completely up to date on Lion updates. Both systems are running 10.7.4. Does anyone have a solution or heard a rumor of a solution coming soon regarding the invisible mouse cursor "curse". I hate having to restart my iMac everytime I exit out of target mode just so I can get my mouse cursor visible again.
Food for thought.... Wouldn't it be really cool to have a target mode capability to see your other computers desktops in seperate window screens on your main display. You then could go back and forth from each window by just double clicking or by certain key commands. You could drag and drop from desktop to desktop. Tell me this is coming soon.
Thanks

There was a duplicate post of this question answered at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HExpertOnly=&HFORCEKWTID=8448:5&HOID=50650000000800000065190000&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_S=0

Lmp bluetooth keypad connection issues

I bought the LMP Bluetooth Keypad for my new system. I put batteries in it and turn it one and push it together with my wireless keyboard and the light shows it's on but I can't get it to work. Can someone help me?
Thanks

Make sure Bluetooth is turned on. Hit Bluetooth in your System Preferences, and make sure the 'Discoverable' box is checked (on). Then hit Keyboard in System Prefs, and hit 'Set Up Bluetooth Keyboard' at the bottom. You should be promted to enter a code from your new keyboard. I hope this helps~

I´ve recently bought LMP Bluetooth Keypad WKP-1314. I have OSx Lion 10.7 I cannot connect the keypad

I´ve recently bought from Appstore Boston an LMP Bluetooth Keypad WKP-1314. I have OSx Lion 10.7 installed in my MBPro
I cannot connect the keypad through bluetooth, even as following the instruction.
Can you help me on that? Tks in advance
harryfromsantiago

Here is the best I could find.
http://www.lmp-adapter.com/
This is their company site.

Hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

Didn't work in what way. Are you unable to start it up? Does it start but then freezes? Does the screen stay black when you turn it on?
Try this - press the home and power buttons and keep pressing them until the apple logo appears.

My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

HT201263 hi i have an iphone 4 im fed up with it it keeps freezing and blue screen i have restarted it every other day for 2 wks now even had it in a phone shop now the screen is blue with a white line down the middle and will not let me switch off after

my iphone 4 has been acting up for 2 wks now every other day it keeps freezing sometimes i can wake it by pressing the 2 buttons tog ive restored it restarted it had it in a shop were they got it back on, saying it was the soft ware, but the same day i got it back it froze again, now the screen is blue once again and it wont let me switch it off n sort it with pressing both buttons and the computer isnt finding it, im fed up i will never have another iphone any ideas anyone please

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

Airport Express and Extreme both having timeout issues once every few days.

I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
Any ideas?

Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.

TS1368 "Cannot connect to the ITunes store" Trying to purchase through an app (Game Of War) and have received this error for the past three days. I can still purchase music through ITunes and I have read Apple's article on troubleshooting and none of th

Tried everything on Apples list for this issue with no luck. Any suggestions?

Ok I got it fixt.
Go to: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/72/wa/directCallLandi ngIndex?wosid=tRtVd4bx348XlzN7Je9tb0&localang=en_US
Manage account, and resend your verification email..
Hope it helps.

Mouse stops, computer freezes. this problem occurs with any mouse: bluetooth, wired, and a spare logitech wired mouse. iMac 0S10.6.8

Help! Mouse stops, computer freezes. Restart helps for a while, then mouse doesn't respond. Problem occurs with my 4 "mice" - bluetooth, apple wireless, logitech wired & microsoft wired. Any solutions?

Problem solved!
First, the underlying cause MAY have been an unusual circumstance: a smartphone (Galaxy Android) was placed next to the iMac, turned on and with Bluetooth enabled, and left for hours to charge. Could this proximity have resulted in the Mac getting some strange Bluetooth input?
Fix: Using the temporarily-installed mouse and keyboard, I removed the existing Bluetooth keyboard and trackpad entries. (I just removed every Bluetooth device.) Then I used the standard procedure to re-pair the wireless keyboard and trackpad.
After removing all Bluetooth devices, I could not get the Mac to detect any Bluetooth devices until I restarted the Mac, at which point device detection and pairing worked flawlessly.
My best --and admittedly ignorant, sketchy-- theory: Some mal-formed event got stuck in the Bluetooth input stream, causing the trackpad up and/or down states to be hyper-sticky. That event couldn't be cleared without removing the originating device and re-pairing.
HTH

WRK54G dies every 3 days. Why, and even more important, can I prevent it?

I have a WRK54G wireless router, and every three days exactly it doesn't work anymore. The lights are still on, but no one's home
I can't even ping it, it times out, and the only solution is to unplug it, wait 2 or 3 minutes, plug it back in, and let it start up.
Then everything works perfectly, but the same problem happens in 72 hours.
Why could this be happening? And how can I stop it from happening?
Thanks in advance

ensure that you are using the latest firmware, and also consult your ISP to see if they are changing your IP every 3 days or what ?

My new MP doesn't see LMP bluetooth numeric keypad

I just got my new Mac Pro and I'm quite excited with it... But I can't make my LMP Bluetooth numeric keypad working...
The bluetooth keyboard and trackpad matched regularly, but MP doesn't see the LMP. I tried in all ways but... none...
Any help please?
Thanks

Hello mnstudio,
The following article provides some useful steps that can help get your numeric keyboard paired with your Mac Pro.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Cheers,
Allen

Working with both a bluetooth keyboard and keypad

Is there a limitation on how many keyboard devices can be used at once?
I have a third party bluetooth keyboard and keypad set. Each of them was recognized and paired with the iPad okay.
However it only connects to one device or the other. Never both at the same time. Is this a limitation of the iPad software? (also of note: the keypad works okay with the exception of the enter key. It worked okay for the purpose of typing in the code to pair the device with the iPad, but not when in general use.)

Im also having this same problem with the Microsoft BT Keyboard 6000. I can only use one at a time.
Also, I cant get the copy & paste ( Control C or V ) to work

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

I am using a LMP Bluetooth keypad and it started to use batteries up every three days?

Similar Messages

Maybe you are looking for