I am using a tascam-144 interface with garageband. How do I remap SD7k kit?

Hopefully someone can help me on here.
Garageband is picking up my TASCAM 144 midi interface when using my sd7k drum kit, however, all of the pads are not registering in the program. I will hit the hi-hat and crash, which play fine, but the snare, kick drum and other toms are not registering in garage band. I have researched online and found a procedure called re-mapping each individual pad so that it plays each snare, kick drum, crash, hi hat, etc. Does anybody know an easy way to do this through the program?
Thanks in advance,
Shari

foxyroxyD wrote:
digital piano - midi in/out - audio interface - usb - Macbook.
check the cabling:
http://www.bulletsandbones.com/GB/GBFAQ.html#controllertointerface
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Im using Duet2 Interface with Garageband 09 when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound how can I eliminate this?

I'm using Duet 2 Audio Interface with Garageband 09, when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound. How can I eliminate this?

do you have any thing plugged into wall power? Audio interface, computer, speakers, amp for the guitar? if so are they all plugged into the same power strip? if so, have you tried another outlet?
Altertively have you tried a diffrent port on the combo jack? Have you tried a diffrent guitar cable? Have you tried a diffrent guitar or audio input device like a mic? Is the device directly plugged into the combo jack, or is it being routed throughs some thing?

Problem Using Zoom H4 as an Audio Interface with Garageband

I'm new to GB and I am having problems getting started using my Zoom H4 as an Audio Interface with Garageband on my iMAC.
I'm fairly certain that I have the connection and all of the setting configurations correct, and yet I cannot get any sound from the H4 into GB.
I do see the sound volume registering in the Input Level window of the H4, but not in GB.
Here is what I see in my Garageband:
Preferences >
Audio/MIDI >
- System Setting
- Built-in Microphone
- Built-in Input
- H4 Audio IN (when H4 is connected to the iMAC via USB)
Of course I have selected the H4.
Any help or insight would be greatly appreciated. Operators standing by!

I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info?

Can we use applets as user interfaces with sockets, RMI and J2EE

Dear Sir or Madam,
Since I am a TA for software architecture class, some one ask me the following question: I think the answer is "No" based on the document on http://java.sun.com/sfaq/
How I answer the quesions? Looking forward your help!!!
1.You may have 2 applets and 2 html files. One applet with one html file may stay at a client PC and run on this PC, and the other applet with the other html file may stay at a server PC and run on this PC. In this case, all the applets are run locally.
2.Could applets works with sockets, RMI and J2EE?
3.Can we use applets as user interfaces with sockets, RMI and J2EE?
Thank you very much!
Best regards,
Jing

The scenario you paint doesn't quite make sense. The "server PC" wouldn't be running an applet, normally, since applets are by definition in a web browser page, and most likely involve user interaction, and "server processes" generally are done without user interaction.
The security rules around applets are that -- by default -- applets can connect with sockets ONLY to the server from whence the applet was loaded. RMI uses sockets (J2EE is too broad a spec) and hence RMI calls would also be limited to the server from whence the applet was loaded. Within that limitation, an applet could open all the sockets it wants, so long as they are all on the server from whence the applet was loaded.
If you want two applets on two different systems to communicate with each other, the simplest way is to have them rendevous through a server process on the server(s) from whence each applet was loaded. Maybe it's PC-a <-> server-a <-> server-b <-> PC-b ...? Or maybe PC-a and PC-b both are talking to the same server.
The limitation is rooted in the security subsystem. You can specify a policy file and override anything in the security subsystem. That does mean signing the applet and then cajoling the user into agreeing to grant greater levels of security than the default. In such a case you can open sockets more broadly and then PC-a could talk directly to PC-b without going through any servers.
- David

Can i use my usb audio interface with apple tv? For example Focusrite 2i2

can i use my usb audio interface with apple tv? For example Focusrite 2i2

Afraid not - AppleTV does not support USB audio devices.
I assume you don't mean using the device as an optical input for the computer, connecting AppleTV's optical out to it.

Using Band-in-a-Box with GarageBand

Does anyone out there use Band-in-a-Box with GarageBand?
If so, I would have several questions. BinB is a great program ... particularly for setting up chord progressions. And, completely compatible with G/B.
Used it many times w G/B 2. But running into a few difficulties w G/B '09 (or, 5), whatever.
Thanks.

What's the difficulties? Creating a midi file in BiaB and dropping it into GB should work fine!

Does anyone kwow how to use the Korg M50 editor with garageband?

does anyone kwow how to use the Korg M50 editor with garageband?

Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.

My mac OS X did not come with GarageBand, how do get it for free?

My mac OS X did not come with GarageBand, how do get it for free?
I don't want to pay for garageband because it should have come with my laptop but it didn't. I got it used so that might be the problem. Also I installed leopard on it. I'm not sure if that would affect it at all. Please help. Thanks.

Okay, so you bought the machines used?
What OS version was on it when you bought it?
You bought Snow Leopard (10.6.x) and installed it?
The original version is important because there were some OS versions that did not include iLife (incl. Garageband) - you had to get it separately. And, the retail Snow Leopard disk does not include it.
So, if that is correct, then it doesn't have to have it installed. In any case, you can still buy a retail version of iLife with the full suite of apps from online retailers; either version 09 or 11 will work with your OS. Or you can just buy Garageband at the app store.

Using TASCAM US-122 with GarageBand...doesn't seem to work

And not only with GarageBand...the software that the US-122 came with isn't even picking up the signals omitted from the TASCAM itself. I hooked up a keyboard to my TASCAM using a cable (I'm not sure what it's called...but it's the same thing you would use to connect a guitar with an amp), plugging each end into the INPUT (TASCAM) and OUTPUT (keyboard) jacks. The interface is showing me signs that the connection to and from the keyboard works via flashes on a green LED...but when I try to clarify the connection on my computer, the software (tuner, buffer, etc.) won't show any signs of connection. The USB cable is connected, I set my sound up exactly the way the instruction manual for the TASCAM said to, but it's just not picking up. It could be the interface itself, however...I can't hear anything when I plug a pair of headphones into the US-122. Do I have to use a MIDI cable, or is my interface not operating properly? Help me, please!
iMac G4 Mac OS X (10.4.6)

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

Using an Applet to interface with the computer

h6. Situation
I am trying to build a an Applet, which will allow me to interface with a computer in the same way that a simple 'presentor' does. For clarification a 'presentor' is a piece of hardware that you plug into the computer and then use a radio device to move through the slides.
I cannot think how to do this, though I am sure that it is possible...its Java?! The only way i can kinda see it working is if the Applet emulates a piece of hardware...if that is the case then I think I might be out of my relms of programming. However I appreciate that what I am attempting to do flys in the face of Java in a sense at it runs and exists in a Virtual machine...but there has to be a way....If i can get an Applet to read and write a file on my operating system....then I must be able to get it to emulate a mouse click?
What do you guys think? Am I being to ambitious or just stupid? :)

Ok, here goes :)
Basically I am trying to create a web based Remote Presenter. You know those bits of hardware were you plug the receiver into the PC and then have the hand held device that allows you to skip though slides.
I think that the need for a receiver dongle is pointless, extra stuff to carry around. I am trying to use my Nokia N95 device, with its build in webserver to create something a bit different.
So far I have been able to create an applet that I have signed, that has the ability to open a socket and wait. I have a very simple server app that sends data to that socket, either a 1 or a 0. When the applet receives this value, it performs a mouse click.....
I have now put this applet onto my N95 mobile web server which is basically a very simple apache webserver and I can access the page and download the applet. The next stage is to somehow create a program that can talk though my mobile phone to the applet......
Ultimately, when I give a lecture I will be able to just browse on the PC to the URL of my mobile web site (xxx.mymobilesite.net) and then run an application on my mobile to control the computer......
A lot of work for a simple power point controller...but with the possibility of more....

Any possiblity to use single Inbound Service Interface with multiple Receiver Agreements

Hi All,
Scenario: PROXY to FILE.
Requirement is to receive to two locations.
Is it possible to use single Inbound interface with multiple Receiver Agreements. I tried using two operation in the Inbound Service Interface, and Operation Specific in Determination. But couldnt proceed further. Do I need to use seperate Service Interface for two receiver locations?
Please suggest some solution.

Hi Naveen,
There is a possibility but in the case in the same server location with dynamic configuration: Placing file in two different directories using single receiver communication Channel
With different location you would need to develop a new adapter module as Amit Srivastava explains and develops here Send File to Two Different Locations using Adapter Module
Regards.

Can i use my Tascam us144 mk2 with the camera connection kit on a new ipad mini retina

Hi everybody
can someone tell me if i can use my Tascam US144MK2 usb soundcard with a camera connection kit to get audio into my IPAD MINI latest retina version ?
Thanks
Tuki

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Can I use a MOTU 828mII interface with Garage Band

I have a MOTU 828mII interface and I want to use it with Garage band. How do I set it up?

You should be able to no problem . I might be speaking to fast .. Now you didn't say what your weapon of choice was. An iMac or what. I use a MOTU 128. With an iMac.
As I remember you install the software for you MOTU unit. Then go check for the newest driver and install it.
Now for G.B... look in the preferences for GB .. Look at the Audio/ Midi settings. There you can select the unit you want.
Peace ...

Is there any way to use the Korg Kaossilator Pro with Garageband 6.0.5?

I'm getting pretty decent at working around with the newest version of Garageband. I've gotten my Akai MPK Mini (usb/midi keyboard) to work by adjusting a few preferences here and there, but for the last week I have been trying and trying to get my Korg Kaossilator Pro to hook up MIDI with Garageband. I understand if the program/software isn't as advanced as Logic or Ableton (be getting those soon!) If anybody could help me it would be MUCH appreciated
P.S. if anybody is having troubles with exporting the AIFF/WAV/MP3 audio files I could give you a bit of help. I have figured out how to correctly export the audio loops and sounds that I have made from my Kaossilator Pro into Garageband! It is quite simple actually and is ALOT easier than you would think. Following the tempo/pitch for your song w/ these WAV/AIFF files is really easy too! I have made almost 4 songs now just using samples and loops from my Kaossilator Pro. I just would like to know if anybody has found out how to use it MIDI w/ Garageband? It would REALLY help me out Thanks!

yeeeeah thats what i've been figuring out for the last 12 hours haha. kinda've a pain but hey it works out. u can still throw some pretty cool effects and what not. Even with MIDI cables running from my kaoss pro into my mac doesn't work. i can transfer the loops I make on my kaoss pro to the editor on my comp, then transfer those files to GB then go from there. It ***** there isn't a way to hook it in and sync it w/ GB so you can hit record then start jamming on the kaoss pro. Thanks for the response though!

I had an iphone 3GS, but received my new iPhone 5 with micro sim, but wanted to keep old mobile number so rang up to change it, that's all working fine, but iMessage is still using the number I received with iPhone, how do you delete a new number?

I had an iphone 3GS (normal sim), but received my new iPhone 5 with micro sim, but wanted to keep old mobile number so rang up to change it, normal text messaging is working fine, but iMessage is still using the number I received with iPhone 5, how do you delete that number I can only receive iMessages on my original number?

Issue solved

I am using a tascam-144 interface with garageband. How do I remap SD7k kit?

Similar Messages

Maybe you are looking for