I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?
I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?
Device Central was discontinued April 23, 2012.
http://www.adobe.com/products/devicecentral.html
And replaced with Adobe Edge Inspect CC (for Cloud subscribers)
http://html.adobe.com/edge/inspect/
Nancy O.
Similar Messages
-
What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun... -
I understand there is a way to use my Super Drive with my PC. However, it requires a System OS Disk. Which I never received. Can you help me with this?
Rick6812 wrote:
I'm using Windows 8.1.
I do not know what you mean by a Windows 8.1. Please clarify.
The Apple superdrive is designed to be used with the following Macs.
It will not work with any other Mac unless you perform this modification;
http://www.tuaw.com/2012/04/02/use-the-macbook-air-superdrive-with-any-almost-ma c/
Are you trying to get it to work with a PC?
Ciao. -
Question
I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? I am super frustrated ith the situationThanksUpgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....
-
I run Windows 7 Home Premium on an HP Pavilion dv6. I cannot install iTunes or QuickTime. Can you help me with this?
Hello raadabdaun,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues installing iTunes for Windows. The following article provides the most relevant information and troubleshooting steps:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Good morning. I just purchased Imatch but cannot download my music from an iphone 5 to IMatch in Icloud. Can you help me with this?
Hi
Has iTunes completed its scan of your iTunes library on your computer Subscribing to iTunes from an iOS device.
Jim -
We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?
Joining an encrypted WEP or WPA Wi-Fi network
-
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Can you help me with this Premiere CS4 error? (picture included)
Hello
I have Adobe Premiere CS4 and when I recently updated to 4.2.1 many of my videos now do not have playback in the source or edit windows. Some are black screens, and some are turquiose during playback. If I click on the edit window to select the video frame and move it within the edit window (say to the left side) it will play back with a turquoise overlay and show the video behind it enlarged. This ONLY happened when I did the update. I am running Windows 7 64bit. When it was at 4.0.0 everything ran just fine. The video I have been working on is a 1080p .MOV file. Has anyone else seen this? There is a picture of the problem below.
Thanks for any help!
James PorembaUpdates, whether with a program, or the OS from MS (or Apple), can cause all sorts of driver issues. These are most often seen with video and audio drivers. Just a simple OS hot-fix can render these obsolete instantly. Also, some recent nVidia drivers contained some "gamer-only" modules for things like 3D rendering and 3D stereovision for use with nVidia goggles. These seem to have been updated, so that these modules do not bring Adobe programs to their knees.
A couple of XP-Pro hot-fixes messed up my nVidia Quadro in PS. A simple driver update fixed those. I had gone more than 6 mos. with not one problem, and then installed the hot-fixes and BOOM!
Good luck,
Hunt -
I thought I had registered before but had to re-register today. I tried to retrieve my old password using my [email protected] E-Mail address but got no response from Firefox.
I have an HTC Incredible Android phone and would like to use Firefox as my browser on it, and "sync" its operation to the Firefox application I use on my Apple iMAC. Can you help me?Hi from Mozilla Services Operations. We just fixed an issue with the "forgot password" process. If you try to retrieve your old password again, you should receive an email at your account's email address with further instructions.
-
Can you help me with this ( vlan,accesslist,management )
here's the scenario I have two vlan 10 & 20
I have 2 switch and 1 router
the target of this setup is that vlan 10 can ping or reach vlan 20 but vlan 20 cannot be reach or ping vlan 10 it is that possible
Here's the setup
In SW0
vlan 10
name Management
interface FastEthernet0/1
switchport access vlan 10
switchport mode access
interface FastEthernet0/2
switchport trunk allowed vlan 10
switchport mode trunk
In SW1
interface FastEthernet0/1
switchport trunk allowed vlan 20
switchport mode trunk
interface FastEthernet0/2
switchport access vlan 20
switchport mode access
interface FastEthernet0/3
switchport access vlan 20
switchport mode access
In Router
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 192.168.10.1 255.255.255.0
ip access-group 1 out
interface FastEthernet0/0.20
no ip address
interface FastEthernet0/1
no ip address
duplex auto
speed auto
interface FastEthernet0/1.20
encapsulation dot1Q 20
ip address 192.168.20.1 255.255.255.0
ip access-group 1 out
interface Vlan1
no ip address
shutdown
ip classless
access-list 1 deny 192.168.20.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 deny host 192.168.20.11
access-list 1 permit host 192.168.10.11
access-list 1 deny any
access-list 1 permit any
Im new so i dont know if my setup is correct ...
can any1 help me about this,,,
thanks.Hi,
let's suppose PC0(Vlan 10) wants to communicate with PC1(Vlan 20):
-traffic enters f0/0.10 with src 10.11 and dst 20.11 and it is forwarded out f0/1.20 where there is an egress ACL
-this is a standard ACL so it matches on source only and there is a hit for second entry permit 192.168.10.0 0.0.0.255
-now PC1 replies and traffic enters f0/1.20 and is forwarded out f0/0.10 where there is egress ACL
-there is a hit on first entry deny 192.168.20.0 0.0.0.255( packet src is 20.11 and dst 10.11)
So end result is that Vlan 10 cannot reach Vlan 20.
I don't think this is what you wanted
Now of course traffic sourced from any PC in Vlan 20 destined to PC0 is filtered as you wanted because it is filtered on f0/0.10 outbound as above.
ACLs are stateless and communication in TCP/IP is bidirectional so the best way to achieve what you want to do if you want to filter more than Pings would be to use CBAC or ZBF or reflexive ACLs
Regards
Alain
Don't forget to rate helpful posts. -
Ipod touch can no longer connect to XP following Apple upgrade, HELP !
This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. ThanksDoes the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I entered the wrong passcode too many times and now my iPhone is disabled. What can I do to retrieve the passcode?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
I have tried to renew my icloud subscription on my iphone. I have been unsuccessful after several attempts. The last time the reason give was that the security code of my credit card is incorrect. It is the number. Can you help?
Have you tried checking your payment information details to make sure the CVV (security) code is correct (see http://support.apple.com/kb/HT1918)?
-
''locking as a duplicate - https://support.mozilla.com/en-US/questions/841566''
I wanted to respond to an ad on craigslist, and when I click on the email link, nothing happens.Try here. http://reviews.cnet.com/8301-13727_7-10329974-263.html
Maybe you are looking for
-
Blue Screen with Error Code B8156CEO
Hi,my printer shows this error code after turning it on. All the lights are blinking. Plugging off the power supply or trying to reset by holding the power on button doesnt work. Seems to be in a firmware loop. There is some rest of connection to the
-
Starcraft 2: Will the current Mac Mini run it?
hi all, i'm going to be picking up a Mac Mini in a couple days and wanted to know if starcraft 2 would run on it. i did a lot of searching it seems that all the posts were from 2011 and 2010 and a lot of them were running SC2 in Windows on the mac mi
-
I cant play movies on my iphoto that ive downloaded from my iphone
I cant play movies on my iphoto on my imac home computer that ive downloaded from my iphone. Please Help
-
SQL Query - To Find Users with end dated responsibilities
Oracle Apps ver: 11.5.10.2 Oracle DB - 9i How can i list users and the access assigned to them for a specific division irrespective of the responsibility being end dated at responsibility level
-
Hi need help in data extraction.
Hi everybody, I am trying to extract some ekpo table datas from R/3 and load in BW. What i did was: 1) created a char info object with a field and no attributes. 2) Created a Key fig with Target quantity-->0unit. 3) Created Info cube Assigned