I am using Firefox 23.1 all of a sudden images are not displayed, I have started in safe mode, installed a new version and nothing help
I have tried everything from re-installing FF 32.1
restarting is safe mode
re-examined all extensions to see if any could be cause it and disabled some and nothing.
I will NOT go higher than 23 as I have many more problems when I was in those
I have a mac. ...10.8.5
If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu Bar
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong
Similar Messages
-
Completed recommended steps of Safe Mode, Default Themes, Extensions, Hardware Accelerators. In the Options setup, Security, The box to "Remember Passwords for Sites" is still greyed out & unusable.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
While using stumbleupon images are not displaying on homepage only links to images
when i log onto stumbleupon and go to my homepage or any other users homepage in stumbleupon the images are not displayed. Instead there is a written description(link?) in its place. I have not excluded images in firefox preferences. I have updated all my add ons, plugins and exensions. I believe it started after i updated flashplayer or another add on and i had made stumbleupon my homepage in firefox. Also just updated to firefox 4 thank you for your help. another clue when i am downloading sites in stumbleupon the images are in the larger + size not the usual - size. normally they are in the - and you click and they enlarge(zoom?) to the + size click again and they go back to the -. Hope that helps.
when i log onto stumbleupon and go to my homepage or any other users homepage in stumbleupon the images are not displayed. Instead there is a written description(link?) in its place. I have not excluded images in firefox preferences. I have updated all my add ons, plugins and exensions. I believe it started after i updated flashplayer or another add on and i had made stumbleupon my homepage in firefox. Also just updated to firefox 4 thank you for your help. another clue when i am downloading sites in stumbleupon the images are in the larger + size not the usual - size. normally they are in the - and you click and they enlarge(zoom?) to the + size click again and they go back to the -. Hope that helps.
-
Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.
Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
SAP Webdispatcher :Images are not displayed after using the URL filtering
Hello,
I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
with Permfile as follows:
#Denial of the useradmin URL from the WebDispatcher
P /irj*
P /irj/*
The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
icm/HTTP/auth_
P /logon_ui_resources/*
P /logon_ui_resources*
but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
The same issue also happened when using the icm/HTTP/auth_xx
Do you have an idea how to deal with this issue?
Thanks in advance;
HassanHello,
After checking the HTTP code of the irj page on IE, i foud the needed URL to permit so i modified the permision table and it works fine for the moement
P /irj*
P /irj/*
P /logon_ui_resources/*
P /logon_ui_resources*
P /AFPServlet/*
P /AFPServlet*
P /com.sap*
P /com.sap/*
P /webdynpro/resources*
P /webdynpro/resources/*
Thanks for you help,
Hassan -
All of sudden, images are not loading completely
It makes no diff if I upload it directly or as a dependent file, all images are only uploading about 20%, then there is a big grey area. I have DW5.5. The pages upload, but the images are not. This is across two web hosts, 3 web sites at least. Help please Here is one of the sites Trip Reports for St. Lucie Audubon Society
chatting with AVG tech now.
She said they have a patch and to do a repair install.... try it and see if that helps. I'm going to try now.
To repair your AVG please follow these instructions:
Go to Start -> Control Panel.
Note: Click Settings first if Control Panel is not available in the Start menu.
Open (Programs) -> Programs and Features, or Add or Remove Programs.
Select AVG in the list of programs.
Click the Change or Change/Remove button.
Select Repair.
Follow the instructions on your screen to complete the installation.
Restart your computer. -
In Mac OS X Yosemite, Finder / Favorites / All My Files, "Today" files are not displayed.
After upgrading MacBook Pro to OS X Yosemite, "Today" files are not displayed in Finder / Favorites / All My Files. It worked prior to the upgrade.
After further investigation, it is not the displaying of "Today" files that is the issue. It appears that Finder / Favorites / All My Files is not correctly finding & displaying files when using the View / Arrange By / Date Last Opened criteria. If I switch the criteria to / Date Modified, it finds & displays the file correctly. See attached screen shots. (It is possible that this problem existed before Yosemite, as I don't recall which criteria Finder was using before the upgrade.)
-
All events in one calendar are not displayed
I have two gcalendars. On my iphone I have caldev set to sync both calendars to ical on the iphone. On one of the calendars, *some but not all* of the events do not display. I tried doing a search and they don't display. I verified that I was looking at the correct year for the date that they should display.
The missing events display normally if I go to Gcal on my desktop computer, and with the iphone using the web version of gcal.
Why would events show up on Gcal web but not all of those events via Gcal caldav?
Message was edited by: rick wintomacYes. I tried changing the setting to Sync All Events (instead of the time limited sync) and let it refresh. No change. No display
I also tried rescheduling the event by one hour on the same day (no other changes), then save. No change. No display.
I ended up deleting the events and re-entering them, with identical information (including the recurring end date, remarks, etc., you name it), and then the events appeared like the rest of them in the same calendar.
I'd still like to know if there is a solution to the original problem. I'm still concerned that other events, maybe in the other calendar as well, are no appearing and it's impossible to rely on a sample or to verify every event.
Thanks for your assistance. -
i think i may have caused this wheni inadvertently pressed upgrade when i had an internet explorer message appear.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
No additional details. I just need to know how to solve the problem.
If you read the article [[Websites look wrong]], does it help any? I would recommend trying each step in that article, restart, test, if it doesn't work, move to the next step.
-
When i upgraded Firefox from version 3.6 to the next version I got a message about Frames that did not work. I work as a warehouse manager and we use an application called LogTrade when we ship goods. LogTrade was not working with the version after 3.6, I think it was 4.0? I had to reinstall 3.6 to get it working. Since LogTrade is essential for my work I don't know if I dare to upgrade to version 5.0.
You can try this extension to override compatibility issues,
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ -
'''bold text'''I have found out that I need to disable my Firewall, and stop my pop-up blocker, before downloading the new Adobe Reader. Now, I have uninstalled it and re-installed it several times, because on the Checl Plu-In Page, it still says it is outdated. I don't know what else to do.
Bill,
Thanks for getting back to me. I am very frustrated. Initially I called to ask questions about what software version I needed and got my questions answered. I received the messages with registration/sign in info and the link to download. Then I got the screens shown on the attachment. I did this several times on Friday and then called for assistance, which put me into the Forum area to leave my question. This morning I have used your link and gone to the same place and got the same results. I am beginning to wonder if this is what I want. We need software that will let us edit pdf text and drawings files. Can you confirm that I am trying to get the correct software and what I need to do to complete this download?
I don't believe it is a system problem because I have 215 GB of free space on my hard drive.
Thanks,
Margaret -
I pressed the bottom to download the new software in my iPad, but now it´s bloqued until I do it from iTunes. I have not saved my photos before, so is it possible to go back or a way to save my photos?
Thank you.I understood your question to mean that you are seeing the iTunes logo and the USB cable on the iPad screen which means that something went wrong and you have to restore the iPad.
If the software has not been installed yet, you can try to stop it and them backup the iPad, them go back and install the software.
If you are going from iOS 4 up to a higher version, iTunes should have backed up the iPad as part of the process. -
My Firefox stopped responding and freezing. I downloaded and installed a new version and this did not help. Reinstalled several times.
Moving this discussion to the Downloading, Installing, Setting Up forum.
SJ1122 have you removed the migrated InDesign CS6 installation using the uninstaller located in the Applications/Utilities/Adobe Installers folder? If so then please also run the CC Cleaner tool - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html to ensure complete removal.
Adobe applications are not designed to be copied/migrated/transferred to other computers. In the future please migrate/transfer/copy your documents and settings and reinstall your Adobe Creative Applications. -
All of a sudden I can not print my e-mail in firefox (I used to be able to) I can print if I copy and paste to MSW or do it in IE or a Web sight.
== This happened ==
Every time Firefox opened
== About a month agoIs it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.
Maybe you are looking for
-
how do I add just 1 more album to my iPad mini from my iMac (10.8)?
-
hi, It's a mystery to me exactly what's required here. There are companies in the listing provider in the documentation for the Exchange (https://www.adobeexchange.com/resources) which provide certificates for Adobe AIR software: https://www.globalsi
-
HTMLCSS report printing paper size
hi all, i have problem with paper size in report as html css i set 8.5 - 14 for A4 but when my report page more than 2 or 3 pages , my print preview in IE or Mozilla is not correct and this area is variable for header and body how to fix this it, my
-
Influence message control with messages generated in ERP
Hello! Can you use SRM Influence message control to get an error message from ERP? When creating a SC/PO I would like to get the error message that the minimum order value for a vendor is not reached. Thanks in advance! Best regards, Karin
-
Cs4 small jpeg file shows as large image size
Hi I am using Photoshop CS4 and I am trying to downsize images shot from my camera to less than 1 mb, by shifting the quality of the jpeg slider to the left in the save as menu. Once I've done that when I open the newly reduced jpeg file again, and I