I am using flash media decoder 2.5 and not getting and sound
im not running a camera as device . im trying to run usb 2861 device
thanks in advance
if i try the camera with the mic as device there is still no sound.
Similar Messages
-
Using guitar rig in logic -9 but not getting same sound....
Hey fellow logic users
Ok heres the problem ( cut to the chase ) I am hooking up my guitar directly to the audio box direct to input 1 I have guitar rig in my plug in section now when i play the song and want to play along It comes out clean, but when i press record enable it plays like the guitar rig sample i created then when i press the space bar to start playback to practice it it plays clean but then whe i record it comes out slightly not the way it sounds when not recording I hope this is understandable lol : ) what do I need to do to make what I sound like in the guitar rig while rehearshing it so it comes out the same and not clean. I put the playback knob on my audio box in the middle so i can hear the drums bass e.t.c aong with the guitar but still no dirty sound during rhearsal before recording ThanksCheck under the audio menu options that "auto input monitor" or something like that, is enabled.
-
Problem with NetConnection in Adobe AIR(Flex) using Flash Media Server.
Hi
I am creating a small chat application using Flash Media server. I have already created all my user interface components in Flex(Adobe AIR).In this application rather than sending text messages user can also send file to another user in his friend list.
problem what i am facing is, when i am sending file through FMS most of time it send successfully but for some files while sending application loss netconnection.
so i would like to know, rather than closing application what are other condition when FMS loses network connection?
Any help would be appreciated .
Thanks.Hi. It looks like your code is not finding the mp3. At least,
I can reproduce your error code by removing the mp3 from the
directory, or renaming it.
Btw, if you test with FF instead of IE, you'd see the error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032:
Stream Error.
at KZFlash_fla::Sound_2/KZFlash_fla::frame1()
Hope that helps. -
How to video via email using flash media playback setup?
How I can send video via email? I send every week an email that contain a link to WMV file on our website. I am trying to send the same thing using flash media player. Here the html generated via flash media playback setup and will not display in an email. Any advise
<object width="400" height="400"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="400" height="400" flashvars="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></embed></object>salma_salma wrote:
Thanks Janaki but how can I add a new application? I tried to do it using Flash Media Administration Console but it doesn't work
Hi Salma,
To add an application to FMS follow the below steps
1. Create a folder "my_app" under "$InstallRoot\applications" directory.
2. For simple server side code... add "main.asc" file inside "$InstallRoot\applications\my_app" directory which has the content like
application.onConnect = function(clientObj){
trace('onConnect function");
return true;
3. To add streams to the application, creates 'streams' folder inside "$InstallRoot\applications\my_app" directory, within that create '_definst_' folder and then place your FMS supported streams within the directory. So your streams for the 'my_app' application will be at "$InstallRoot\applications\my_app\streams\_definst_\mystream.flv".
You can connect to this application using the url "rtmp://your_server_name/my_app". To play the stream mystream.flv using video player, use the url "rtmp://your_server_name/my_app/mystream.flv".
Regards,
Janaki L -
How to use flash media server with cisco show n share live event module?
hello all
Is it possible to use flash media server in show n share (non dme)live event ? i 've configured flash media server, can receive multicast streams, bu i have no idea what to write in video url fild in the live event basic setup.Hi Temur,
You should be able to stream from a Flash Media Server.
The URL should look like this:
rtmp://xxx.yyy.com//flv:
You can do some tests from a PC to get the exact URL that would suit your environment.
Regards,
Nicolas -
I use the example FMS installation files, Flash Media Live Encoder is very well, but when I released the source replaced with flash 11.4 a worse problem.
Beginning everything is normal and Flash Media Live Encoder does not make any difference, but when I upload bandwidth limit to 2KB / S (This situation often occurs in the actual situation, such as the user suddenly side live side of upload files), video and audio becomes very blocked, this is not the key to the problem is to when I upload bandwidth settings for normal, blocking situation will be no better, and have been very bad, but Flash Media Live Encoder automatically adjusted to normal, flash 11.4 but not.
I have to use flash 11.4, nobody will go to install Flash Media Live Encoder.
Mike Do you test only test Flash Media Live Encoder, but did not test flash, or flash need another set of code, but I really can not find a reason.
Please help me, God。
https://bugbase.adobe.com/index.cfm?event=bug&id=3363878There are ways to?
-
Was using Flash 8 on a PC now using Flash CS3 on MAC X and having problems
Hello,
I'm currently creating a photo gallery displaying thumbnails
of the original main image.
I was using Flash 8 on a PC and now am using that same file
on a MAC OS X using Flash CS3. And now the thumbnails are not
visible. The main image appears but the thumbnails do not.
The SWF created with Flash 8 viewed properly but when I
opened the fla in Flash CS3 the thumbnails stopped appearing and
I'm not sure what to do?
Any help or suggestions would be greatly appreciated!
ThanksWhoops, maybe I posted this in the wrong forum
-
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?
What I am trying to do, is to record a user's microphone's input and save it to the server. Afterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
How can I redirect the http request to the files I was recorded into my applications/appName folder? Or I need to somehow moved the recorded files to the /webroot folder?
Thanks!I probably have asked a stupid question.
My recorded streams are still saved in the applications/appName/streams folder.
And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
And the rmtp recorded streams are abled to connect through http now. -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?
Check System Preferences > Sound > Output
Make sure the correct device is selected. -
Hi friends,
I have 2 screen fields EQUNR & EQKTX.i have attached custom help to EQUNR.when i select value from f4 help then i want corresponding value from search help should get populated in the EQKTX field.
I have used F4IF_FIELD_VALUE_REQUEST function module.but i am not getting the result.
DATA: lt_return_tab TYPE TABLE OF ddshretval.
DATA: lw_return_tab TYPE ddshretval.
DATA: lv_equnr LIKE eqkt-equnr,
lv_eqktx LIKE eqkt-eqktx.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'EQKT'
fieldname = 'EQUNR'
searchhelp = 'Z_EQKT'
SHLPPARAM = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'GW_SCREEN-WPTXT'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = 'X'
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
return_tab = lt_return_tab
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
IF sy-subrc = 0.
READ TABLE lt_return_tab INTO lw_return_tab INDEX 1.
IF sy-subrc = 0.
MOVE lw_return_tab-fieldval TO lv_equnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lw_return_tab-fieldval
IMPORTING
output = lv_equnr.
SELECT SINGLE eqktx
INTO lv_eqktx
FROM eqkt
WHERE equnr = lv_equnr AND
spras = sy-langu.
IF sy-subrc = 0.
gw_screen-wptxt = lv_eqktx.
gw_screen-equnr = lv_equnr.
ENDIF.
ENDIF.
ENDIF.
Please provide the solution.I have written the same code as you said but still its not giving me the equnr value.
DATA : lt_dynpread1 TYPE STANDARD TABLE OF dynpread,
lt_dynpread11 TYPE STANDARD TABLE OF dynpread,
lw_dynpread1 LIKE LINE OF lt_dynpread1,
lw_dynpread11 LIKE LINE OF lt_dynpread11,
lt_return_tab1 TYPE TABLE OF ddshretval,
lw_return_tab1 TYPE ddshretval,
lv_equnr1 LIKE eqkt-equnr,
lv_eqktx1 LIKE eqkt-eqktx,
lt_eqkt TYPE STANDARD TABLE OF eqkt,
li_dselc TYPE STANDARD TABLE OF dselc,
lwa_dselc TYPE dselc.
TYPES: BEGIN OF lty_eqkt,
equnr TYPE eqkt-equnr,
eqktx TYPE eqkt-eqktx,
END OF lty_eqkt.
DATA: lt_eqkt TYPE TABLE OF lty_eqkt,
li_dynpread TYPE STANDARD TABLE OF dynpread,
lwa_dynpread TYPE dynpread.
DATA:
lg_condition TYPE string.
TYPES: BEGIN OF lty_eqktx,
sign(1) TYPE c,
option(2) TYPE c,
low TYPE eqkt-eqktx,
high TYPE eqkt-eqktx,
END OF lty_eqktx.
DATA: lt_eqktx TYPE STANDARD TABLE OF lty_eqktx.
DATA:lw_eqktx TYPE lty_eqktx.
lwa_dynpread-fieldname = 'GW_SCREEN-WPTXT'.
APPEND lwa_dynpread TO li_dynpread.
CLEAR lwa_dynpread.
Read Screen Field Values.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = li_dynpread.
Read the first record as only one record will be present
READ TABLE li_dynpread INTO lwa_dynpread INDEX 1.
gw_screen-wptxt = lwa_dynpread-fieldvalue.
CLEAR lw_eqktx.
lw_eqktx-sign = 'I'.
lw_eqktx-option = 'CP'.
lw_eqktx-low = gw_screen-wptxt.
APPEND lw_eqktx TO lt_eqktx.
CLEAR lw_eqktx.
IF gw_screen-wptxt IS INITIAL.
SELECT equnr eqktx
INTO TABLE lt_eqkt
FROM eqkt.
ELSE.
MOVE 'EQKTX CP GW_SCREEN-WPTXT' TO lg_condition.
*lg_condition = GW_SCREEN-WPTXT.
SELECT equnr eqktx
INTO TABLE lt_eqkt
FROM eqkt
WHERE eqktx IN lt_eqktx.
ENDIF.
lwa_dselc-fldname = 'F0002'.
lwa_dselc-dyfldname = 'GW_SCREEN-WPTXT'.
APPEND lwa_dselc TO li_dselc.
CLEAR lwa_dselc.
lwa_dselc-fldname = 'F0003'.
lwa_dselc-dyfldname = 'GW_SCREEN-EQUNR'.
APPEND lwa_dselc TO li_dselc.
CLEAR lwa_dselc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'GW_SCREEN-WPTXT'
PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'GW_SCREEN-WPTXT'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = lt_eqkt
FIELD_TAB =
return_tab = lt_return_tab1
dynpfld_mapping = li_dselc
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3 -
I am not getting any sound on my iPad while using key board or in any games
I am not getting any sound while using key board , in games have tried all the option as suggested by other members like rotation / mute switch setting , resetting the iPad etc . Any other way to solve this issue
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Does using homesharing use up internet usage if you do not get unlimited usage?
does using homesharing use up internet usage if you do not get unlimited usage?
No, it's on your local network,
-
I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. The artist is listed as Apple Inc. What happened?
This is the message I received:
Your video may include the following copyrighted content:
Disputed claims
"Kadeem UIM-Trust Issues (Instrumental)", sound recording administered by:INgrooves Your dispute awaiting response by 12/08/12
What does this mean?
After your dispute has been submitted, your video will soon be available on YouTube without ads for third parties. This is a temporary status and might change at any time.Learn more about copyright on YouTube.This question comes up from time to time. YouTube and Facebook are both wrong.
There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
“You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
http://images.apple.com/legal/sla/docs/ilife09.pdf
You should this (also providing the above link) when following the dispute process with YouTube. -
Help me step by step for using Flash Media Server!
Dear all!
With reference to advertisement/introduction of in website (http://www.adobe.com/ ), I am writing to you to request some things bellows:
My company would like build video streaming application on Website (and mobile in future), maybe something likes http://youtube.com . It is streaming: films, video clips with the different sizes which are stored in folder of server with high quality, powerful, secure, extendable, high-performance, highly scalable, and custom video solutions. After I went through the Flash Media Interactive Server 3.5 of Adobe I see that it seem usefully with the streaming video application of my company. So that, before my company purchases the Flash Media Interactive 3.5 software we would like use trial the Flash Media Interactive Server 3.5 software with full features, unlimited the end users, and full functions in few months. And we hope you provide full Flash Media Interactive 3.5 software and guide clearly, more details and more focus for “how to use the Flash Media Interactive Server 3.5 for matching with our application” during use trial. If we see this software which displays well the streaming video application and it matches with our application so that we will purchase this software immediately.
Addition, did we have the encoder (video, film) software when we purchase full Flash Media Interactive Server 3.5? Because, I know that adobe media encoder CS4 supports for encoding video/film to FLV/F4V, but it is different software and do not package with Flash Media Interactive Server 3.5 software. And do you have software to encode automatically video/film like flash media live encoder? Because I think that there are some troubles to use adobe media encoder CS4 for encoding video/film such as: sequential, so slow, non-auto encoding and occupies 100% CPU performance.
Finally, adobe flash player 10 in Flash Media Interactive 3.5 has HD (+,-) feature. But I do not know to use it? Could you tell us more?
Please give me your hotmail for chatting and reply us early!
Thank for your prompt help!
Sincerely,
Thao Nguyen Thi,
Online application Center
Vietnam Data Communication Company – Center II (VDC2).
Email: [email protected]Hi Thao Nguyen Thi,
You could download the Flash Media Development Server for free which provides the complete feature set. The only limitation is on the number of connects (allows only 10). But you could use that to try out a scaled down deployment which might give you an idea on what factors to consider while scaling up while allowing you to try out the streaming aspects.
There is also this helpful document http://www.adobe.com/devnet/flashmediaserver/articles/fmis_largescale_deploy.html which gives a lot of useful information while going about the deployment.
From what you say you seem to be interested to know the deployment of Video on Demand (VOD) streams.
Thanks
Mamata
Maybe you are looking for
-
I have been trying to update imovie and iphoto but i keep getting the same message and dont know how to go about it. Help please!
-
Teaming 3.0 beta 4: I've added a txt file and a word document, re-indexed through the "admin pages". The search function doesn't find words inside the documents, what's wrong? Surely it should be able to search content within file folders?
-
I am having a problem opening images in the Editor from iPhotos into photoshop elements
I am having a problem opening images in the Editor from iphoto (on my macbook pro) to the photoshop elements
-
Hi, Recently I changed web-hosts and still have my email accounts set up with my old web-host, with the MX records pointing to the old servers. I set up Thunderbird accounts and opened my existing email accounts through IMAP, it shows all current ema
-
How to look what TIME I accessed a website?
I want to check what time I watched a movie last week. I know how to check the days on the history bar. But I want to know the specific time. Is that possible? P.S I have the firefox 31 version