I am using iPad and safari is not working, what can I do?

Safari on my iPad isn't working, when it bumps up it's nothing but a dark page! How can I fix it?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Similar Messages

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • In my Ipad 2 th safari is not working what can I do??

    In my I Pad 2 , the safari is not working , what can I do??

    I agree with JimHdk but I will guess at this one. If you have an internet connection (you can get email) but Safari is not responding...
    Go to Settings>Safari>Clear history, cookies and cache. Restart the iPad. Hold down on the sleep button until the red slider appears and slide to shut off. Hold down on the sleep button until the Apple logo appears and then let go of the button to power up again.
    Then try safari again.

  • I got the iphone 5 from Australia and I put in a Sim cards from GREEK company and it is not WORKing WHAT can I DO

    I got the iphone 5 from Australia and I put in a Sim card from GREEK company and it is not WORKing WHAT can I DO

    I did ALL REQUIRED STEPS with the Australian Sim cards but when I put GREEK Sim cards in ,mobile closes

  • My password no longer allows me to log in. I tried to change it and now its not working what can i do?

    my username does not allow me to start my mac book air. what can i do

    Reset your user password. If you are using Lion, hold down the option key when you hear the starting "bong". then select the recovery disk. Then follow the instructions as alid out in the second arrow bullet on this document.

  • HT201412 My Ipad has the connect to itunes logo on it. when i do it will not restore. I have followed all the steps on the apple website and it is not working. what can I do?

    My ipad has the connect to itunes logo on it. When i do connect it will not restore. I have tried everything on the apple website what should I do?

    Have you tried forcibly turning it off and then placing it into recovery mode: http://support.apple.com/kb/HT1808
    Any errors when restoring ? http://support.apple.com/kb/TS3694

  • I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless.  I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?

    I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?  I have tried unplugging, restarting, and resetting.  No luck!  Thanks!

    You should probalby contact Netgear

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Installed ios 6 on new iPad and siri will not work.

    Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
    Thanks, and have a great day.

    Then you need to change your device details as this still says iPad2.
    It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
    There are a millions and millions of people using Apple iDevices.
    Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
    If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having.

  • Hi, I am user iPad and I do not know how can attach a file into email e.g. CV.  Thanks

    Hi,
    I am user iPad and I do not know how can attach a file into email e.g. CV. 
    Thanks

    You attach files within the app that creates the file or within the app that the file is saved. For example you email photos from within  the Photos App itself. Typically there will be an action icon within the app - an arrow icon many times - you tap on that to bring other options like Share - then Email.
    Attachments must be mailed within the apps themselves.

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • My iPad's mic is not working what should i do

    My iPad's mic is not working what should i do

    Hey Khaled zaki,
    Thanks for using Apple Support Communities.
    The article says iPhone, but the same troubleshooting steps apply.
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Follow these steps, testing after each.
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
    Dirt or debris
    A screen protector or case
    When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
    Turn the iPhone off and then on.
    Update to the latest version of iOS.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    Have a nice day,
    Mario

  • My safari is not working how can I reload this app

    MY phone was unblocked by apple and I was told to plug my phone in iTunes to install the update as I did. When my phone restart I were able to it's my new net work but my safari and mail is not working. Can some one tell me how to remove the two apps and reinstall them.

    build in apps cant be removed or reinstalled they are hardcoded into the os
    you should most likely just restart the phone

  • I downloaded a audio book from iTunes on my iPad but it will not play, what can I do?

    I downloaded a audio book from iTunes on my iPad but it will not play, what can I do?

    Swipe your Home page to the far right and do a Search of your audio book.

Maybe you are looking for

  • Time Machine Backup on External Drive Invalid sibling link

    I've used time machine to backup macbook air for several months.  From Feb 2011 without any problems until about 2 months ago.  I started to get the message that backups could not be started. I realized that the disk would not mount right away.  And

  • Nokia N8 email line break problem

    So, I've only found one other post on here about this problem, with no solution. The problem being that when you reply to an email in a hotmail inbox on the N8. Any line breaks (created by pressing return) are ignored and the whole email is sent as o

  • Score mode

    In score mood the default score-quantize setting keeps being wrong. I can change the default but when I start logic again the setting is gone. Can anybody help my with this?

  • Oracle 10G Commit Not Visible

    I have a commit or concurrency issue I hope someone can shed some light on. I'm building rows in a reporting table via several stored procedures and reporting on the results. The final stored procedure uses the rows built by the initial stored proced

  • Pick List with WM

    Is it possible to have the pick list print (EK00) automatically even if the delivery is relevant for warehouse management?  The users would rather use this output than the transfer order document via WMTA. Thanks, Ron