I am Using Iphone 3GS, Is it possible to change the complete front and back panels?

I am Using I Phone 3GS model I got lot of scraches over the body of the phone. Is it possible to replace teh complete panel with new one??

If you Google "iPhone 3gs parts" you will be able to find vendors that sell front and back panels.  So, I would say it is possible to replace the front and back panels.  I wouldn't recommend doing it yourself unless you are experienced in this type of work.

Similar Messages

  • Is it possible to change the font size and weight in an ADF table?

    Is it possible to change the font size and weight in an ADF table? I have tried to change the various font size and weight settings for a table and its columns and they seem to have no effect on the font size or weight in a table row.

    You would use skinning to modify font-size & weight for the table.
    In addition to the link suggested by Vinod,
    Take a look at http://biemond.blogspot.com/2009/01/adf-skinning-in-jdeveloper-11g.html
    Thanks,
    Navaneeth

  • TS1363 I can't connect my iphone 4s in my laptop I changed the usb cable and is not charging too. What I can do?

    I cant connect my iphone 4s on my laptop, I changed the usb cable and is not charging too. What i can do?

        D13, thanks for these details. This an awesome clue. Are you able to connect to this Wi-Fi connection with other devices? Let's try a few steps to resolve this issue.
    First, reset the network in Settings>General>Reset>Reset Network and power your device off/on.
    Secondly, delete the Wi-Fi connection in Settings>Select your Wi-Fi>Forget this Network and the try to connect to that Wi-Fi again.
    Lastly, try creating your Wi-Fi connection. Tap Settings>Enable Wi-Fi ON. From Choose a Network, select Other. Enter the Wi-Fi network name. Select Security. Select the Wi-Fi network type then select Other Network. Enter the Wi-Fi network password then select Join
    Keep us posted.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • I'm a singer wondering if it's possible to change the key to a backing? Eg. a key convertor?

    I'm a singer wondering if it's possible to change the key to a backing (song)?  Eg. A key convertor?

    Even if that is true (and I am almost 100% positive that it is not true), you're talking about getting a warrant and going through a lot of legal channels, plus you'd have to show probable cause that information on the device would be helpful in solving a case, and even then, only the information relevant to the case would be available.
    For this family's situation, there is no viable option.  Let's not falsely raise hopes by arguing semantics and technicalities.
    Can you even support that claim with any documentation?  That Apple has the ability and/or performs that service at all?

  • How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

    how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

    If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

  • I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more  . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

    I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
    It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Is it possible to change the font name and size without having to compile?

    Dear All
    We have one requirement that we need to change the font name and font size at run time dynamically without having to compile all the forms in 6i.
    Is there any way or work around to achieve the same.Kindly suggest us.
    something like using uifont.ali or forms60_defaultfont, or set_item_property
    Thanks and Regards
    Thangaraj.

    Dear All,
    Thanks for your updates, Technically what both of you said is correct. but in application server we used something like ClientDPI to match the client server font with the application server, i need to know that is there anyother way something like this...?
    I have read one document(Note:28397.1 in metalink) saying that using uifont.ali file we can change the font at run time, but i have used this only for report
    Thanks and Regards
    Thangaraj.S

  • Is it possible to Change Product when you replace Back Panel

    Hi, Recently i have changed the Back Panel of my Notebook ( HP Pavillion G6), just now i checked the system model with the help of Belarc Advisor it is showing as Hewlett-Packard HP Pavilion g4 Notebook PC.Is it possible to change the product when you replace Back panel. ThanksSrinu Chigulla

    Hello , Welcome back to the HP Support Forums! When you replaced the back panel, did you replace any internal components as well?  As long as you didnt replace any internal parts, then the model of your notebook should not be different. Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • I am using iphone 4 .IS it possible to upgrade the OS on this moble to iOS5.IF possibel , How much I need to pay for this

    Hi All,
    I am using an iphone 4 .I have two question
    1) How to find the currently installed OS version
    2) Is it possible to upgrade this to iOS5 , if possible how much will it cost ,

    binuveranal wrote:
    can some one tell me the main advantages of upgrading to iOS5 .
    What are the main additional features available with this version
    Much better notifications, better Mail, better camera, iCloud, wireless syncing, wireless updates, etc.
    You can read this review of iOS 5
    binuveranal wrote:
    IS it risky to upgrade to the iOS5 , Because I have seen many post in form that many people faceing issue when they upgrade to the latest version
    It isn't that risky. You may be reading hundreds of posts here about problems, but that is out of MILLIONS of iPhones that have been upgraded. Percentage-wise, that means most people have no problem.
    However, as with any major change to your system, you should back up everything your iPhone first. Just right-click it in iTunes to get the backup menu. That will be your safe fallback position in case something goes wrong.
    I still use an iPhone 3GS. That's older than your iPhone. But iOS 5 works fine on it.

  • IPhone: AudioQueue - is it possible to change the sample rate?

    I've been playing around with the AudioQueue stuff for a few days and it's all working fine.
    I was trying to build a low-latency playback system by making the streaming buffers the same size as the audio file and pre-loading the buffers (which works fine) but I've hit a snag.
    I've been trying to get the streaming to work at different sample rates so that I can play back the same sample at different pitches. I managed to do it by modifying the sample rate in the AudioStreamBasicDescription structure but in order to actually make the stream playback at the new rate it seems you have to create a new output, reload the audio file into the buffers and re-enqueue the output queue before starting playback again, otherwise the sample rate change has no effect.
    There is a method to set queue properties; AudoQueueSetProperty() but unfortunately the sample rate Property (kAudioQueueDeviceProperty_SampleRate) is read-only
    Can anyone suggest a way to achieve this with AudioQueue or do I need to move over to OpenAL?
    Thanks,
    Neil

    Dan,
    there is one point in your understanding, which i am not sure what you think about when talking about it: I understand E-series devices do not support this property change while the VI is running.
    infact, you cannot change the sample clock rate during acquisition. but
    this does not mean that you cannot change it while the VI is running.
    you have only to interrupt the acquisition. since you want to acquire
    continuous, this would have the same effect as stopping the vi, i asume.
    so the best way to accomplish this task is to use an external clock.
    this is e.g. often used for acquistion on rotating shafts. the
    acquistionrate is always e.g. 24 points per revolution regardless of
    the rotational speed of the shaft, except for a maximum frequency of
    course.
    Norbert B.
    NI - Germany
    Message Edited by Norbert B on 09-14-2005 04:16 AM
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Is it possible to change the font style and size of the front panel title?

    Can you change the style and size of the Front Panel Window title?  I seem to have no luck.  I seem to be stuck with only 1 font/style.  I would like to use a superscript for 1 of the letters in the title.  Is this possible?  If it isn't this would be a nice feature to have in the future.  I am using LabVIEW 8.5.1.

    Things like the window title font is a function of Windows - not LV. You can change it globally, but not on a window by window basis.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • IPhone 3GS won't turn on past the Apple logo and there's a swirling circle too...

    Hi! For a while now, my iPhone has been a pain in my butt. I dropped it whilst out for a meal in April and it cracked the screen and did damage to the bettery which means that the iPhone turns off randomly when not connected to a power source (An Apple Genius has told me this).
    But when out today, my iPhone shut off and it wouldn't turn on past the Apple logo. After about 30 seconds, a little circle like thing pops up on the bottom of the logo and starts to 'swirl' and it does nothing when connected to a power source.
    I've hard reset it, connected it to iTunes and nothing seems to work. I tried restoring it in July and that didn't do anything to the phone at all.
    Any help at all will be hugely appriciated and if anyone else has had the same problem as what I have, how do I fix it?
    Thank you!

    Wow sure sounds like your iPhone is in really bad shape.
    But the next step is a DFU Mode Restore. If this does not work your iPhone is telling you it needs major most likely expensive repairs, or outright replacement.
    DFU Mode Restore, with iTunes open connect iPhone to your computer, hold both Home and Power buttons for exactly 10 seconds, release Power button continue holding Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds longer. If the screen is blank, black this is DFU Mode. Restore the iPhone Firmware. DFU Mode again is iPhone in Recovery Mode per iTunes but has a blank, black screen. If not successful keep trying to get DFU Mode, it can be a bit difficult even for experienced users to get, keep trying.

  • Hi guys. Water damaged Iphone 3GS, works great, can charge on the wall plug and the usb cable on the PC, but neither the computer nor Itunes can detect it. Also I can pass and receive phone calls, but I can't hear anything. What are my options?

    I did try DFU, restarts, try other computers, etc. But nothing. Should i buy a new battery?
    P.S: I'm sorry for my english ^^

    Obvously your phone does not "work great" . It is damaged. Your option is to buy a new phone or get an out of warranty exchange at an Apple store.

  • Is it possible to change the "viewer position" and angle?

    I want to create a virtual world (city) and be able to move around in it.

    actually, it's not the "Viewer" that you're looking for, but the ViewingPlatform (if you're using the Simple universe, otherwise, the transform above the ViewPlatform).
    If you're using SimpleUniverse, just get the ViewingPlatform, and get the ViewPlatform TransformGroup. You can modify that to move the ViewPlatform around in the VirtualUniverse. Also, you might look into ViewPlatformBehaviors.
    - Adam

  • I'm using my Iphone 3GS, when I want to update the software to IOS5. It not allow me to update and prompt me the error message say that connection error or server problem. Anyone have any suggestion.

    I'm using Iphone 3GS, When I want to update the software to IOS 5 (latest software). It not allow me to update and prompt the error message say that the connection problem, time out on server. Any suggestion on this matter. Have try different date before.
    Thanks.

    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

Maybe you are looking for