I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
user guide

Similar Messages

  • I can't use siri on youtube with ios 7,that is very bad!

    I can't use siri on youtube with ios 7,that is very bad!can you help me?

    Siri requires an iPad 3 or newer.

  • I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ?

    Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.

    If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
    If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost. 
    Granted, there is no requirement to have a computer to use an iPhone.

  • Iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    Hi there skmonirul,
    Welcome to Apple Support Communities.
    From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here: 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If the issue persists, try restoring your iPhone as shown in the article below.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    So long,
    -Jason

  • I upgrade my Iphone 5C with IOS 8.1.1 and now I can't synchronize my iphone with my computer, it stop on level 3 (calendars synchronization)

    Problem of Iphone 5C synchronization after an upgrade 8.1.1.:
    I upgrade my Iphone 5C with IOS 8.1.1 and now I can't synchronize my iphone with my Apple computer, it stop on level 3 (calendars synchronization). Could you help me ?
    Thanks

    have you read this:
    http://support.apple.com/kb/TS1591

  • IPhone 4S using 3G in the background,causing huge battery loss. From last three days I'm finding my phone switched off in the morning when I wake up. Please Help

    iPhone 4S using 3G in the background,causing huge battery loss. From last three days I'm finding my phone switched off in the morning when I wake up. Please Help

    Maybe you hit the power button for 5 sec while you were asleap?
    And what do you want to say us with:
    Abhijeet Gupta wrote:
    iPhone 4S using 3G in the background,causing huge battery loss.

  • I have transefer function like (1/(s^2+s+​5)) and i have a square wave input , i want to use this transfer function with this input to see the output , how can i do that , with example please.

    i need to know also how to represent this transfer function in labview, try to send me example. answer me at my mail

    "st" wrote:
    > answer me at my mail
    give a valid e-mail first, and your name, we don't like to help anonymous
    people
    > try to send me example.
    how much do you pay ?
    > i have transefer function like (1/(s^2+s+5)) and i have a square wave
    > input , i want to use this transfer function with this input to see
    > the output , how can i do that
    First you have to know what you are doing, like an engineer : you have a
    Laplace, continuous time transfer function but LabView handles discrete
    signals only. Use matlab/simulink if you want to simulate continuous time
    systems easily...
    If you definitely want to use LabView, the first step is to discretize your
    continuous-time transfer function, i.e. decide a sampling rate and convert
    it to a "z transfor
    m". Then you can directly use the "IIR Filter.vi" as I
    said earlier.
    Philippe Guglielmetti - www.dynabits.com me at my mail

  • I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

    I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

    By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
    Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

  • I have the iphone 3GS and recently downloaded the iOS 5.0.1 software.  I can open my apps; however, after a few minutes (sometimes seconds) I am booted out of the app.  Any ideas?

    I have the iphone 3GS and recently downloaded the iOS 5.0.1 software.  I can open my apps; however, after a few minutes (sometimes seconds) I am booted out of the app.  Any ideas?

    Dowload any new free app from the App Store.

  • HT1766 My Iphone 4s dont open up after i switched off it. when i open it it is stuck in the apple logo mode. I cannot switch it on again. is their any way to backup my photos since i cannot switch on my phone?

    My iphone 4s dont open up after I switch off it. When I click the switch on button it blinks the apple logo in the black background. Is there anyway that i can backup my photos since I cannot open my phone?

    Hello Ganewee,
    Thank you for posting in the Apple Support Communities.  It is certainly impossible to use your iPhone if it won't power on.  I found some steps that can help with an issue like this:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If you get to step 6 where you have to restore your iPhone and your iPhone is recognized in iTunes, I would try backing it up before going through the restore.  You can find steps to backup your iPhone here:
    iOS: How to back up
    http://support.apple.com/kb/HT1766
    I hope this helps!
    Best,
    Sheila M.

  • HT201413 May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"

    May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"
    Thank you.

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • Am using iPhone 3GS with iOS of 6.1.6. How do I download iBook m

    H

    If you are asking how to download an older version of the iBooks app, download it to iTunes on your computer, and once it has downloaded open the Purchased section in the App Store on your iPhone. Tap on the app and you should be prompted to download an older, compatible version.

  • IPhone 4s with ios 6 shows full wifi signal but can't access to the internet while other idevice can

    Hi everyone,
    I updated my iphone 4s to ios 6 a few months ago and there was no problem until I change my sim card to other carriers last two days.  This second sim card is the same sim card that I used it earlier this year with no problem.  But the problem I face is when my iphone goes to sleep mode I realised that I can't receive any push notification from imessage, Whatsapp, and Line.  When the phone is awake the wifi signal is back and I have to go to each application in order to get the message.  I have tried the following methods but it didn't work: reset all network settings, restore as new iphone, push home and power button together, switch off my iphone, turn on airplane mode, and even change my router.  At the moment I have restored my iphone as new for the 5th times.
    Now the problem is worsen, after the phone is sleep for about 5 minutes and when I awake my iphone it shows the wifi signal.  But I can't access to the internet at all.  It shows no working internet on Whatsapp. Safari can't load any web page, the weather app can't update temperature etc.  I have to switch off and switch on wifi in setting menu so that I can use the internet. And when I leave my iphone four about 5 - 10 minuetes then the problem start again. While I can't access to the internet on my iphone 4s, I used my dad's iphone 4s with ios 5.0.1 and it works just fine with the internet. My laptop can also access to the internet with the same wifi network but not my iphone.
    Does anybody know what's going on with my iphone 4s? Is it the bug from IOS 6 or my iphone is broken? Please help me.
    Thank you.

    Any update will cause problems for a few users. And those users will rush here and post "the sky is falling" stories about their experience. The 99.99% of people who have no problems after an update won't bother to post here; indeed, most of them don't even know ASC exists. FWIW, I had no problems with iOS 7 on my 4S. Your problem is most likely not related to iOS 6, but you should probably update anyway. For addressing the battery issue see this outstanding article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • HT4623 Many Apps on the App Store now require iOS 7 so us using iPod touch 4G with iOS 6.1.5 now can't download certain apps.so the question is that will the Apple team update devices using 6.1.5 to iOS 7????

    When will Apple update ipod 4th gen from ios 6.1.5 to ios 7

    No.
    As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB
    If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • HT204387 I have third party bluetooth that used to work perfectly with IOS 6.1 but now I install IOS 7 and now some of the function on my bluetooth doesn't work.

    I like to know anyone having problems with bluetooth functions with new IOS 7 ?

    I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...

Maybe you are looking for

  • Finding the right line when Oracle says an error happens at a line number.

    Hi, Were using Oracle 11.1. I use TOAD 10 to develop. When I run a procedure sometimes I'll get an error message saying "an Oracle error happened at ### line number" When I go to that line number, that's usually not where the error is. I'm not talkin

  • Item in sales order not being picked into picking list

    Hi Gurus, Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list? Many Thanks Choudry

  • Front Row -- MBP, question?

    Hi, I have the following computer listed below... I also have a 22" LCD w/DVI connected to my computer... I have my computer setup so that my 22" extends the space of my MBP screen... But -- When I launch Front Row, it launches on my MBP screen, not

  • NAS advice?

    Having just experienced my first iMac HD failure and all the joy that goes with it, I am now considering for my home network of PC's and Mac's an external storage device by Buffalo with intriguing feature of Web access, allowing files to be shared/ac

  • Errior # 2715 when installing itunes 10.

    also when I try to remove itunes from my window computer