I am using iPhone4s, it has signal issues., I am using iPhone4s, it has signal issues.

I am using iPhone4s with vodafone 2G, the phone has network issue (signal droping), it automatically loses the signal, tried with different sim cards also, but the issue is same.please help with any troubleshooting steps.

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

Similar Messages

TS3899 issues sending email using my gmail account on my new iphone4s.

so i was having issues sending email using my gmail account on my new iphone4s. i called my provider, att - to fix the issue, mine anyway, under settings - general - reset - reset network connections. fixes the send issue. releases all of the other junk that was left on your old phone.

Hi Jari,
Thanks to reply me.
There is an workspace details where user solve that problem but now i have troed to access that workspace but its not working .i have cofusion how can i do this where i put
apex_mail.send(
p_to => v_recipient_list
, p_from => v_from_list
, p_subj => 'Hello world'
, p_body => v_body
, p_replyto => null);
this package
and how to and where set SMTP of Gmail and i don't know about gmail SMTP Server Specification
i ahve jus create a form with
P1_TO Text Field
P1_SUBJECT Text Field
P1_FILE_BRE File Browse...
P1_COMMENT Textarea
Please guid me...how can i do that step by step
Thanks

I got my Iphone4 from orange network at uk. Now my contract has finished and I want to use new sim into my Iphone4. How can I do that?

Hi dear,
I have a contract Iphone4 mobile from Orange network in UK. My contract has finished on 24/03/2014. During the contract I broke my Iphone4 which was given by orange company. After I broke my Iphone4, I claimed it to my insurance company to get my new Iphone4 and I got a new one.
I want to use this Iphone4 with my new SIM which is from O2 network in UK. Also, I want to use this Iphone at my country(Bangladesh). I tried to use it with my new sim but my Iphone4 does not support it. Please help me out to solve this problems

YOu would need to contact Orange and have them unlock your phone.
ONly the carrier that the phone is locked to is authorized to unlock it.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

I need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone.

HT1595 i can't see my apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system.

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

TS1398 Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

"Application has not registered to handle incoming messages on the Signaling Session," Diagnostic ID 24041

Hi
We have set up a Lync with connection to pbx. From our scenario we used the Lync 2013 Mobile client (android) to call to our ip phone, but when the ip phone answered, the call drops. We received this error from our Lync diagnostic report "Application
has not registered to handle incoming messages on the Signaling Session," Diagnostic ID 24041. Hope you can help us to interpret this error and suggest any possible solution.
thank you

Hi Edison,
Looks like REFFR is not supported between the gateway and mediation server.
You can try to disable REFFER support and test the issue.
In addition, to better understand the issue, you should check the logs.
Also double check Lync server configuration item for CSMobilityPolicy and CSTrunkConfiguration .
Best regards,
Eric

Measuring signals with different levels using common AI in Fieldpoint

Hi!,
I am trying to configure a Fieldpoint system to measure the following (its for a DC motor test station):
Motor Voltage: 0-240 VDC
Motor Current: 0-50 ADC
Generator Voltage and Current: same as for motor
Options which come to my mind are:
1) Convert the voltages into 0-10 VDC and use FP-AI-110
and simultaneously convert currents into 4-20mA and use FP-AI-111.
2) Convert both voltages and current into 4-20mA and use only FP-AI-111
My questions:
1) Which is a smarter config?
2) Would there be any issues of isolation that I need to consider?
Note:
A) There are other measurements like thermocouple and counter and I will be using the signal specific modules for those.
B
) It is important that total system hardware cost be kept to the minimum.
Platform is Fieldpoint using FP-1601
OS is Win200
Coding is in NI-PDS-6.1
Thanks and best regards,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
You could use the FP-AI-110 to measure both your voltage and current signals. However, you will need to create an attenuation circuit so that you can measure your signal in the 0-10VDC range as you have described. You can also use a current shunt resistor to measure the current by running the current through this resistor and then measure the voltage across it. You will most likely need a resistor near 0.01Ohms that can handle up to 50A. (50^2*0.01)= 25W. That is a big resistor.
It would still be best to convert both to voltages since the modules measure voltage. Even the FP-AI-111 uses current shunts and measures a voltage.
Another thing to know about taking motor measurements is Flyback voltages generated from the coils. These v
oltages can reach several thousand volts and could damage your hardware. Check to make sure that you motor or motor drive has circuitry to limit flyback voltages. Zener diodes are commonly used to limit flyback voltages.
Regards,
Bill B
Applications Engineer
National Instruments

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

When I click on a file to view in Finder in the view as columns, Finder stops responding. If I use Finder in any of the other views, I don't have an issue.

When I go to finder and view as columns so that the right column will open a preview of the file, I get the endless spinning graphic and when I go to Force Quit, it shows that Finder has stopped responding. When I use Finder in any other view mode, I don't have that issue. This just started today. As far as I know, I haven't done any updates today that would cause the issue. I've restarted a few times. I'm running 10.10 on iMac (27-inch, Mid 2011). I when to updates in the App Store and saw there was an update for 10.10.1 and tried to run it twice now. It starts to install and says I have 7 minutes left and then at about 3 minutes, it just opens all my windows again and acts normally. When I go to "About this mac", I'm still showing 10.10 as the OS. Also, in the App Store, when I click on updates, it shows me 4 updates that I've already installed as ready to install. Not really sure what's going on nor why all the sudden this is an issue, but I use the preview mode in Finder all the time so I would love a fix for this. I've tried logging out and logging in as another user and the same issue with Finder happens with other users as well. I've emptied my trash bin as well.

Step one is to log into a newly created admin user account and see if the problem persists.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

Java has updated again today,
i use a java plug in to run my virtual software to access my work from home,
today i have an error message saying that security will not allow access to my website
i use to log in to work from, this is a JREdetection error,
my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

I am using iPhone4s, it has signal issues., I am using iPhone4s, it has signal issues.

Similar Messages

Maybe you are looking for