I am using LABview 5.0 and I am having difficulty with running EXCEL 2000 and my macros after I build an application.

Excel opens and runs the macros correctly in my development programme, but when I build an application and try to run it, Excel opens but does not put the data into the cells or run the macros. Excel opens and runs the macros correctly in my development programme, but when I build an application and try to run it, Excel opens but does not put the data into the cells or run the macros.
The error message is 'Object is not registered in set cell value.vi code-2147220997
I stress that it all works OK until the application is built. Set cell value.vi was downloaded from this site. I am using Windows 98.
Any help would be appreciated.

Be sure you have your Excel activex controls properly registered in your system, there are lots of activex registerers in the web. If this does not work, look at set cell value vi and check for invalid refnums. If even this fails, i'd try reinstalling app builder, but be sure you install it before any LV update (for example 5.0.1f1) unless you want problems like i had with Excel built examples. You can also send an example, and see if i can fix it, but i don't have excel 2000 (only 97) so i don't know if i can do anything else.
Hope this helps

Similar Messages

I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
I would appreciate any ideas about the shut down problem.
TCC

Option 1
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 2
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 3
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

Anyone else having difficulty with Adobe Photoshop CC and Epson Stylus Photo R3000?

Everytime I try to print an image from Photoshop CC to my Epson Stylus Photo R3000, it can't seem to find the printer. I have no problem printing the same image from Lightroom 5 or Preview on Mac. The printer shows in the Photoshop Print Dialogue box but after I click Print the print queue just says searching for printer and can't find it. I can print a test page from the printer Utility and anything else I try, just not Photoshop CC. I'm running OSX 10.9 Mavericks. Thanks.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

Since updating the IOS to the latest version, and I'm having problems with the voice calls and the data connection

I'm facing a problem receiving calls, and connecting to data since I updated the IOS to the latest version

Hi there Abdallahbaba,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W.

I've had Itunes since 2009. Purchased a new computer and attempted to install Itunes with running Windows 8 and encountered a problem. Itunes stopped with error 2324. Having problems trying to reinstall Itunes. Help please.

I've been and ITunes customer since 2009. I have a ipod classic with close to 9,000 songs. I recently purchased a new laptop and attempted to download the latest ITunes version 12.0 to my laptop. I'm running with Windows 8. During the download, ITunes stops and gives error code 2324. Can't reinstall ITunes. ITunes doesn't work. Please help.

Hi chenalej924,
We've an article (linked below) that details a number of steps which can help get iTunes successfully installed on your computer.
Issues installing iTunes for Windows
http://support.apple.com/en-us/HT201668
Regards,
Allen

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Hey Guys, My ipad is disabled, and i havenot synced it with any computer yet, and I am not using find my iphone, how should I enable it?

Hey Guys, My ipad is disabled, and i havenot synced it with any computer yet, and I am not using find my iphone, how should I enable it?

You will need to restore it as new. unfortunately you will lose any data not saved but you can still redownload all of your apps.
http://support.apple.com/kb/ht1414

I have an IPod touch 4 gen. And I'm having problems with the audio when I use other than Apple brand earphones

I have an Ipod Touch 4 gen. and I'm having problems with audio when I use other than Apple brand earphones. I'm talking about music only so far, when I use apple earphones all is fine, but if I use other type of phones ( sony for exemple ) I can only hear the music and the background but not the lead singer voice, can anybody explain this to me? thank you.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
- If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

Is anybody else having problems with iOS 7.1 and Home Sharing?

I have two iPhone 4's - one I recently upgraded to iOS 7.1 and the other running 6.3.1. The phone upgraded to 7.1 will not connect to my (rather large iTunes library) on my Mac Mini (running 10.9.2). The 7.1 phone does see the library - and attempts to connect - but the progress indicator stops at about 50%.
I've tried de-activating sharing on the Mini and then re-activating. I've tried restoring the 7.1 phone from a back-up. No change.
Also - now the 6.3 phone will connect to the library - but the playlists have no entries and 99% of the library is missing.
Before the upgrade - the phone now running 7.1 never had any issues with Home Sharing.
Anyone else out there having issues with iOS 7.1 and Home Sharing?

I've had no problems with Facebook on my iPhone 5 but here are a couple of suggestions.
1. Quit Facebook like I describe then reset the iPhone. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
2. If the first thing doesn't help, quit Facebook again, delete Facebook, and reset the iPad. After the iPad restarts use the App Store app to download Facebook again.

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

When using facetime having difficulty with video, sound is ok.screen says reconnecting.

When using facetime having difficulty with video.msound is ok. Screen says reconnecting

There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120

I am using LABview 5.0 and I am having difficulty with running EXCEL 2000 and my macros after I build an application.

Similar Messages

Maybe you are looking for