I am using microsoft outlook for email in firefox. When I select the envelope for email it takes me to a mailto window in outlook which I have to close.

I am using microsoft outlook for email on latest version of firefox. In the applications window the only selection for outlook is mailto. When I select the envelope it takes me to outlook, however the first page is a mailto page with a link to my home page. I have to close that and get to my email page. How can I skip the mailto and go right to the outlook inbox page? Thank you.

I may have made a mistaken assumption that you were using Outlook.com (online webmail). If you are using Microsoft Office Outlook, then you actually would need an add-on to put a button for that program on the toolbar. I'm not sure if there is one specific to Outlook, but there is an extension named Custom Buttons that can be tweaked to do a wide range of things.
* https://addons.mozilla.org/firefox/addon/custom-buttons/
* forum for getting help with the add-on: http://custombuttons.sourceforge.net/forum/
But... I 'm not sure it's worth the effort because you usually can switch between Firefox and Outlook pretty quickly using the Windows Task Bar or Alt+Tab (keep holding Alt after you release Tab to see all the open windows and then Tab to the one you want).

Similar Messages

Pixel Bender 32bit for CS5 crashes CS5 when I select the plug-in

I am running Windows Vista Premium Home Edition SP2 on a Gateway Laptop. I have 2gb of RAM and I have checked and my Video Driver is up to date. I have un-installed all my other filters such as Topez and now running a clean version of CS5. I also run CS4 on the same laptop as I am working on converting as I purchase upgrades to my other filters. Pixel Bender runs file under CS4 but when I install it Adobe Extension Manager CS5 and then start CS5, load an image and then select Pixel Bender, it crashes CS5.
I have deleted the download and down loaded it again. I have looked through the forum and have not located a thread related to this problem. Does anyone have any suggestions?
Thank you.
Michael

What graphics card are you using? What are the driver date and version as displayed via Vista's Display preferences?

HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation dis

I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.

Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

TS2446 So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?

Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?

Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I received a link to fill out a document on this site through email. However, when I click the link, it just directs me to my FormsCentral homepage and there are no documents for me to fill out. How do I find this document or stop myself from just being r

I received a link to fill out a document on this site through email. However, when I click the link, it just directs me to my FormsCentral homepage and there are no documents for me to fill out. How do I find this document or stop myself from just being redirected to my homepage?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

Mail/Preferences/Accounts
Use the - and + signs to delete or add your new Accounts
see
http://support.apple.com/kb/PH4928
Mac 101
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

Using NIK software...LR5 said it cannot prepare the file for editing

I have reimported photos from my backup HD (Lacie) into LR5. After selecting a photo in LR5 I attempted to edit using NIK software...LR5 said it cannot prepare the file for editing?
Message was edited by: Geoff the kiwi
Changed title to reflect query

Is there a question mark icon next to your photo?
What is your operating system?
Which NIK Software?

Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?

Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?
I changed the about:config to make the rotate gesture move between tabs, and it worked great for well over a year. Now it behaves erratically as described here:
https://bugzilla.mozilla.org/show_bug.cgi?id=877598
It used to be very controllable to move one tab over, now it is erratic and moves quickly and to unexpected tabs regardless of how slow I do the rotate gesture. This is the main reason I use Firefox over Chrome and I would like to continue to do so unless there is no fix to this.

Just set the browser.gesture.twist.threshold to something around 15-25.

I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

I had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

i had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

The warranty is not international and only available in the Country of purchase .If the iPhone is out of warranty Apple or their Agents will also only give service in the country of original purchase.
So if you want Apple help you will have to return it to Singapore or find a 3rd party to repair it if they can in India as long as it is out of warranty and you understand that Apple would never help with that device in future if it has been opened by a 3rd party

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

IMac desktop using OS X Lion How can I highlight a selected text in an email?

iMac desktop using OS X Lion
How can I highlight a selected text in an email?

Send the table as an attachment, either a spreadsheet (if the recipient needs to be able to edit it) or a PDF.

I am using microsoft outlook for email in firefox. When I select the envelope for email it takes me to a mailto window in outlook which I have to close.

Similar Messages

Maybe you are looking for