I am using oracle-- xi-- r/3(bapi)

hi,
all
i am not able to send the date to r/3 system.
i am using oracle(sender)>xi>r/3(bapi) as receiver..
i am able to get the data in xi
under sxmb_moni
i am able to see the data in inbound message (center) & receiver groping.
under Response-->Soap Body it is showing me.....
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="" />
can any one suggest me what might be wrong..
thanx

hi vasanth
i am using a jdbc adapter for oracle db at the sender side.
& at the receiver(r/3) i am using Rfc adapter for bapi f.m .
i am not able to get the data at the receiver side.
SXMB_MONI
under Response-->Soap Body it is showing me.....
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="" />

Similar Messages

Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
     at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
     at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
     at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
     at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
     at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Help needed in using oracle rules SDK

Hi,
For testing my rulesets using oracle rules SDK I doing the following:
1. Creation of dictionary, ruleSet.
2. Declared two kinds of globalVariable variables in my datamodel :
Final and non-Final.(Type of these varaibles are String and Double only)
3. Final globalVaraibles are used in creating rule's patterns.
4. Non-Final globalVariables are used in creating rule's action.
5. Functions are created for asserting globalVariables values and
returning non-final varaibles, since those are required as action
results.
6. In java code I am testing my ruleset (dict.testRuleSet()). Before
testing i am populating my final global variables (since these are used
in rule's patterns),
and updating datamodel.
The above procedure is working fine and I rules are successfully working.
Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
secondly, when i update datamodel with values (in java code itself) it
takes 4-5 seconds in updating it. This is the main issue that why it is
taking this much time??
any comment would be of great help.
Thanks in advance.

I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

SSO and how to Managing User Roles/Privileges with Forms using Oracle db

We are in the process of implementing Oracle Application Server SSO with our custom Forms application using Oracle database -- all 10.2.0.1.0 version.
In our Forms Applications, we have about a dozen roles we have assigned to various users. We need to identify each user using our Forms because we are using the GLOBAL USER throughout the application.
Questions:
-- Do we have to create users/passwords in both OID and application database?
-- Is there a way to easily manage the user and passwords between SSO and Forms App/database in one place? For example, how does a user change their password once, but actually change it in both the database and SSO?
Any advice and/or direction would be greatly appreciated.
Thank you,
Mika
Edited by: user11846198 on Sep 1, 2009 1:41 PM
Edited by: user11846198 on Sep 1, 2009 1:53 PM

Yes, you can have global roles in the DB and assign this roles to specific OID users, and the will heritage the privilages, you can do this using Oracle Identity Management Web Tool http://hostname:7777/oiddas is not complicated.
Greetings.

Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?

When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?

You did not specify which Sun Cluster version and Oracle version you are running.
Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
search under $ORACLE_HOME/dbs in the order:
1. spfile$(ORACLE_SID}.ora
2. spfile.ora
3. init${ORACLE_SID}.ora
Greets
Thorsten

Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---Prashant

Hello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this?

I am new to using Oracle, and I am trying to create an add/insert stored pr

I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
Table definition:
CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
USERID VARCHAR2(40) NOT NULL,
PROD_CD VARCHAR2(9) NULL,
PLAN_CD VARCHAR2(9) NULL,
STATE_LST VARCHAR2(2) NOT NULL,
STATE_NM VARCHAR2(40) NOT NULL,
LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
-- Grant/Revoke object privileges
grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
Stored Procedure Definition:
procedure setUserPlanPref (
userid in varchar2,
prod_cd in varchar2,
plan_cd in varchar2,
state_lst in varchar2,
state_nm in varchar2
is
currentTimestamp timestamp := current_timestamp;
begin
insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
commit;
exception
when dup_val_on_index then
begin
update user_plan_preference up set
up.userid = upper(userid),
up.prod_cd = upper(prod_cd),
up.plan_cd = upper(plan_cd),
up.state_lst = upper(state_lst),
up.state_nm = upper(state_nm),
up.lst_update_ts = currentTimestamp
where up.userid = upper(userid)
and up.prod_cd = upper(prod_cd)
and up.plan_cd = upper(plan_cd);
commit;
exception
when others then
rollback;
end;
when others then
rollback;
end;
end;
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

938319 wrote:
I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
commit;
exception
when others then
rollback;
end;
when others then
rollback;Remove it all.
Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

I am using oracle Apps ERP in firefox wherein there is a Java Plugin , This is working fine in 3.5 version but as soon as i am upgrading to the latest version oracle is not working and firefox crashes. I can't upgrade even though i wish to

We are using Oracle ERP in our company which is a web based ERP system. I am using firefox to work in ERP for convinieince pf working and using internet at the same time. This requires a plugin provided by oracle oajinit.exe to be installed in Plugins it is a JAVA plugin which opens the ERP Screens. This works fine in versions prior to 3.6 version of firefox. However, after upgrading to 3.6 version the forms do not open and firefox crashes. Due to this i am not able to upgrade to the latest version else i'll have to operate the ERP in internet explorer and using firefox for browsing which i do not want. The plugin used for the ERP is "* JInitiator 1.3.1.18 for Netscape Navigator (DLL Helper)"

Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

Custom Workflow using Oracle Workflow in ContentDB

Hi,
Could we use custom workflow which is made using Oracle Workflow instead of BPEL.
Regards,
Yulisar

Having registered custom workflows for Content DB via Enterprise Manager, potentially you can use any tool capable of dequeuing/enqueing messages from the IFS_BPEL_OUT/IFS_BPEL_IN advanced queues as part of a custom workflow process.
By default, we assume you are using Oracle BPEL PM with its Advanced Queue adapater to process the queue messages. However, there is nothing stopping using Oracle Workflow or any tool for that matter.
HOWEVER!!! Warning!!! There is a high probability that Content DB will drop the bundled Oracle Worflow installation in the near future. What this means, is that you should consider installing/configure/patching your own separate Oracle Workflow installation and not rely on the bundled Content DB solution which is used internally for Serial and Parallel Approval workflows.
thanks,
Matt.

Exception while opening a JSP file created using oracle report builder

I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
I have deployed the JSP created above to the Oracle Application Server
but when i try to open the JSP file it gives the following error:
500 Internal Server Error
javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
can anybody help regarding this
this is of high priority to me
thanks and regards
Subhajit

bump

Need to Import an application built using Oracle Service Bus on Oracle Public Cloud

I have built an application using Oracle Service Bus (OSB) eclipsed IDE which transfers file from server1 to server2, reads the transferred file, transforms it into a payload and calls a webservice. I have tested this application locally by installing Oracle Service Bus on one on my servers.
I have java as a service account on Oracle Public Cloud. I would like to import the above application onto Oracle Public Cloud. I am not sure if the Weblogic domain on Oracle Public Cloud has enabled OSB or not.
Let me know if someone can help me.

Hello,
Oracle Service Bus is currently not supported in Oracle Java Cloud Service.
Oracle Java Cloud Service supports deployment of JavaEE and ADF applications.
-- Nilesh

Generate a Report in Excelsheet format using Oracle Reports

Hello,
I want to use Oracle Reports to generate a report and create an output file in Excel Format. Can I achieve this?
If yes, how can I do it or what is the process for the same
Regards
Shivanand

Hello,
There are several solutions :
1) http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_paptoexcel.htm
2) http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/output/output_a_simpleexcel.htm
Regards

How to use oracle fusion middleware for integration project ?

hi all,
in my projects, customer (a bank) already has many applications (bankend & frontend) that are complicatedly connected. I intend to use oracle fusion middleware to integrate all applications and make adding new applications in the future easier. I have worked through documents in the oracle website but I still have no idea how to use oracle fusion middleware to address the requirement, besides oracle fusion middleware includes a bundle of applications I don't know which one I would need.
could anyone give me some instructions ? appreciate your help.
thank very much,

Hi,
For this short description of environment, could be ODI is a incredible tool to help you...
Take a look into my blog that has a lot of concepts and "how to do" instructions.... http://odiexperts.com
However to try help you, what are the used technologies?
Where are you from?
Cezar Santos
http://odiexperts.com

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

I am using oracle-- xi-- r/3(bapi)

Similar Messages

Maybe you are looking for