I am using photoshop cc on windows 8 all latest updates done when trying to crop photo or use clone

I am using photoshop 6cc on windows 8 all latest updates done when trying to crop photo or use clone stamp tool the photo's disappear which makes it impossible to use, photo's do comes back if I stop trying to crop or use clone tool but need to see the photo to use them

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

Similar Messages

Problems with text using Photoshop CC on Windows 8.1

I am using Photoshop CC on Windows 8.1. I get flickering on the screen as described by others. My main problem, however, is that when I try to use the text tool the layer goes completely black and I cannot see what I am typing or edit the text. I have tried updating my video card driver and my monitor driver. I have deleted the font cache file, I have tried using Photoshop without plug ins (I use Nic plug ins). The only thing that has worked is resetting the preferences by holding down alt+control+shift keys when starting photoshop. This allows me to enter text normally on one photograph and one only. Once I have completed that first photograph and load another I get the black layer. I desperately need help. If this continues I will have to cancel my membership as I was much better off using my Photoshop Elements 11 disc.
Any help will be very gratefully appreciated...............help seems to be very difficult to come by Adobe you make it very difficult for your customers!

Ok,I can appreciate that I may not have given enough information. You state that without proper system information nobody can help, but I need to know what information is needed. You also state that I should simply turn off hardware acceleration in the perfs. What does that mean? How do I do that? I have tried changing the GPU Drawing Mode to basic and it didn't work. Is this what you mean? You may be assuming a level of knowledge I do not have. From research I have done this seems to be a problem with windows 8.1 that Adobe have been aware of for about a year. I have followed all the online advice I have been able to find but nothing seems to be working.
Siren2110

Can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

You might want to check this thread. Some have had success with CS5 on Windows 8, others not so lucky.
http://forums.adobe.com/message/4840878
You can try and see for yourself,but I don't think the Best Buy techs were trying to upsell you.
Gene

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com

TS2529 Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates.

Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?

Have you tried here:
iOS: Troubleshooting backup issues in iTunes
Have you tried deleig the existing backup file? I\You can find it location here:
iTunes: About iOS backups
Saying your tried everything provides us with zero information as to what you did try.

When I try to read a PDF file, the window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

HT5594 why in spite of i turn off all of location servies when i turn on cellular data use data again ?

why in spite of i turn off all of location servies when i turn on cellular data use data again
in cellular >>system services >> mapping services
how can i turn off mapping services completly ??
& why now it use data until i turn it off ???

Settings>Cellular>Use Cellular Data for and turn Maps off. If you are not using Maps for navigation, it's not using data, though.

When trying to import photos with iPhoto from photoshop.. won't let me keeps saying that the photos are already in the iPhoto library but they are not... need to fix this

When trying to import photos with iPhoto from photoshop... won't let me keeps saying that the photos are already in the iPhoto library but they are not

If you are using Photoshop from within iPhoto the following may help with the workflow. However, we do need to know the answers to the questions posed by Terence and Larry to be able to help you.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

CS6 - Screen goes black when trying to crop & clone stamp screen goes polorized when using

I run Photoshop CS6 on a windows 7 machine. It has started having two problems:
First, when trying to crop, as soon as I release the mouse button after blocking the frame to crop, the screen goes black - No controls, no picture, nothing. I have to close Photoshop and restart to get back to the photo.
Second, when using clone stamp, as I click to clone the photo switches to odd colors (almost like it was polarized). The color returns to normal when I release the mouse button.
What is going on and what do I do?
Thank you,
Mike Modlin

Update your video card driver from the GPU maker's website, or disable GPU drawing in Photoshop if you cannot update the driver for some reason.

I tried to implement photo albums using iweb and got a publishing error.

I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)

Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT

I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

Here is the ACR 6.7 Windows installer for Elements 10:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383

TS1315 when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an unrecognizable format. It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic.

when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.

I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you

Photoshop Crop won't complete when trying to crop an image.

Photoshop Crop won't complete when trying to crop an image. This just started a couple of days ago and I can't figure out what's going on with it. This happens in Photoshop CS6 and CC, Anyone have a clue what I need to do?

Here is doc. on various cropping options. http://helpx.adobe.com/photoshop/kb/advanced-cropping-resizing-resampling-photoshop.html
Note that if you change resolution and you resample image you basically have to rebuild all the pixels. But seems like it should take just a few seconds. Are you asking it to do something that is not possible with image? Like a height of 500 inches rather than 500 pixels?

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

TS4268 I have apple ID and when trying to sign in to use FaceTime,i always get registration error.how may you help me for that guys,thanks.

I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
Can I get your Advise on what to do? Thanks

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I am using photoshop cc on windows 8 all latest updates done when trying to crop photo or use clone

Similar Messages

Maybe you are looking for