I am using several non-apple software packages and am wondering if Lion is compatable.

I am using some software packages that I am concerned are not compatable with Lion.  iBank, Office mac 2008, Parallels and a few others.  I am a little concerned that spending $29.99 for Lion will cost me a couple hundred in upgrades on the other software packages.  Anyone have any idea how I can find out which programs are compatable with Lion?

iBank, Office 2008 and Parallels are all compatible with Lion.

Similar Messages

  • I'm trying to connect a Sony wireless keyboard and can't figure out how to get the iPad 2 to discover it.  Has anyone had any luck using a non-Apple wireless keyboard and mouse?

    Apple tech so far hasn't helped except to advise me to get manuals online that Sony doesn't post on its website.  I've sent off an inquiry to Sony but don't expect an answer.  Apple assumes my devices are bluetooth but the iPad2 hasn't figured out how to discover them, and I don't know how to make them discoverable.  I'd like to have the option to use them but so far haven't been able to figure out how.

    Heidi-
    On the iPad, go to Settings-General-Bluetooth.  Set Bluetooth to ON and a new window appears while the iPad searches for Bluetooth devices.
    To get the keyboard into a discoverable mode, you may need to remove its batteries for a while.  If it is not possible to get it to appear on the iPad, could the keyboard be defective?  Can it be discovered by other computers?
    Fred

  • I would like to sync my ipod touch with my iMac but I'm afraid of losing data how can i do this without buying non apple software

    i have recently changed from windows to apple, i have my whole record collection on an ipod touch, i have successfuly transfered my music data from my old computer but i am affraid to sync the ipod touch incase something goes missing also for some reason i have numerous duplicates and dont want to have them on my touch i have seen that there is software on the market to help with this problem but i am reluctant to use non apple software on my new computer can anyone help.

    Tough spot if you want Apple only SW, no idea where you can get where you want without some decent 3rd party SW, which as a rule outshines Apple's SW by light years.

  • My brother used a non apple charger and it disabled his iPod touch 5th generation what do I do

    my brother used a non apple charger and it disabled his ipod for over 40 years what do I do?

    Either wait which is not practical or
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • Can I use a non apple wireless hard drive with time machine?

    Can I use a non apple wireless hard drive with time Machine?

    Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
    Matt

  • Can i use a non-apple keyboard with my imac?

    can i use a non-apple keyboard with my imac?

    Welcome to the Apple Support Communities
    You can use the keyboard you want with your iMac. However, note that some keys, as the Command key, aren't present in non-Apple keyboards. For example, in a non-Apple keyboard, you have to press the Windows key because that's the replacement of the Command key of an Apple keyboard

  • Is there anyway I could hook my Apple TV to my (non apple) lap to and essentially use my lap top as my tv. In other words use my computer screen to view content of y Apple TV

    Is there anyway I could hook my Apple TV to my (non apple) lap to and essentially use my lap top as my tv. In other words use my computer screen to view content of y Apple TV

    Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

  • Is it safe to use a non-Apple charger?

    I ordered a non-Apple charger and asked the seller if there was any risks and he told me no because the debit is the good one (not sure what it is, maybe he was talking about the volts?) and it is certified CE. So is it okay?

    Not sure if you would consider it a risk, but there have been deaths associated with the use of non-Apple chargers and devices. That is what has lead Apple to make the statement, and also to work at making it difficult for non-Apple chargers, or non-certified cables from working on Apple devices.

  • Do you need a converter to charge Ipod nano (5th gen) using a non-Apple wall charger/plug adapter in Switzerland?

    do you need a converter to charge Ipod Nano (5th gen) using a non-Apple wall charger/adapter plug in Switzerland? or is the Ipod Nano dual-voltage?

    None of the iDevices are multi-voltage themselves...the chargers from Apple are all 110-240 volt.  You will have to look at the non-Apple charger you have and see if it says it handles 110-240 volts.  Most made today are capable of that range, or they would have to make a different item for each country.
    All you probably need is a plug-pin converter, can find those in the airport, at least in Zurich, don't know about Geneva.

  • I want to use a non-apple email address as an alias

    Hi - I want to use a non-apple address as an alias - the address people will see when I use iCloud to manage my email. Is this possible, and if so, how?
    Thanks all!
    <Email Edited By Host>

    Unfortunately, that's not possible

  • Deploy software packages and applications (roles) to rolebased assets

    Hi everybody,
    I'm new to SCCM and I need some advice about how to deploy software suites (fixed lists of software packages and applications) automatically to our rolebased assets. Rolebased assets are assets that have predefined software suites or 'roles'. Combinations
    of several roles on a single machine are possible. We currently use Altiris NS for our software deployments. The system I have there is as follows.
    - regkey on the local machine defining the role(s) for that asset (values are streamed from our CMDB into the local registry) 
    - dynamic collection for each role based on the value in the regkey
    - task assigned to the collection to install the role(s) (a fixed list of packages and applications)
    - as stated several roles can be assigned to a single asset
    For the deployment of several roles to the same machine we use a in house built solution called Sequence Installer (SQI). SQI keeps track of which role it is installing and will put other roles in a queue. It also has retry and reset functionalities.
    In case of failure it will automatically retry from the failed step. We can also manually restart the SQI from the start or from the failed step.
    We are planning to migrate towards SCCM 2012 R2 and the purpose is to do as much as possible out-of-the-box. Meaning SQI should become obsolete and replaced by SCCM built-in functionality.
    For SCCM, I'm thinking to do it like this: use the regkey to populate a collection for each role and work with a task sequence for the role installation. I'm sure that will work, but perhaps there are far better and simpler ways to do this in SCCM? Furthermore,
    I'm afraid SCCM will not be as flexible as SQI when it comes to automatically retrying and/or resuming the installation sequence in case of failure (failures caused by something that doesn't need manual intervention of course, like source corruption,
    non-blocking failures, et cetera).
    Another way of doing it could be UDA, create a functional user representing each role and assign software to the user. Then link the assets needing a role as primary devices to the user representing the role and pre-deploy the software (in an OSD scenario).
    But again, also in this scenario I need the capability to automatically restart and retry failures.
    It would be great if I could get some other opinions on the subject, thanks guys!
    Kind regards,
    Chris

    nope, I did not start actual testing of the scenario, and this for several reasons (I'm sure TimDK understands what I'm talking about :-))
    - I work at a financial institution where things tend to go very slow (understatement of the year...)
    - I have a lab environment but no rights to create AD stuff for example, I have to officialy request these things and that takes time...
    - lab environment testing is very high-level (wake-on-lan, 1E nomad testing, et cetera), we'll promote in the near future to our test and development environment where more in-depth testing can be performed
    In short, I'm thinking about the concept(s) that can be used, actual testing and playing with it will be for later... I thank everybody for the tips, my goal is to get some thoughts and insights from the experts, one can only learn... I will feedback later
    about the what and how and which solution will actually gets implemented.
    Regards,
    Chris 

  • HT204053 can I use 2 different apple id's and one itunes id for two seperate I-phones?

    can I use 2 different apple id's and one itunes id for two seperate I-phones?

    Welcome to the Apple Community.
    Yes.

  • I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??

    I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
    Can anyone advise me on what I need to do?
    My existing account is linked to ireland as my bank account details are there, does this make a difference?
    Please help!

    Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.

  • TS1717 i have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me it told me your software is up to date and close

    I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then closed on me,please help.

    it said it wasnt installed correctly
    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

Maybe you are looking for

  • IPhone 5 and voice memos

    I moved my iTunes library over to another hard drive, and had to resync my playlists.  My voice memos are now all on my computer and showing up in iTunes but they're not on my iPhone 5.  I'm running Windows and iTunes 11 (latest version).  I keep che

  • Problem in deploying war file

    Hi, I have a problem in deploying a war file in Weblogic 7. I have deployed successfully a jar file containing an ejb. I would like to deploy a war file which web.xml has an <ejb-ref> element referencing a session bean contained in the jar previously

  • Deleted a app, reinstalled it then turned off my phone, now it wont turn back on

    i deleted my twitter app as it would not work, then i tried to reinstall it and it wouldn't reinstall so i turned off my phone and it won't turn back on, it goes to the picture of the apple logo and no further, resetting it won't do anything and i've

  • Import data from postgreSQL into SQL server 2005

    I am trying to import one table from postgreSQL to SQL Server 2005 using sql server import and export wizard. When i test the connection after providing data source, location, username, password in the Data Link Properties section I get the message "

  • Connection Setup Help For N97 :(

    Hi guys, Had the N97 since its release, had no problems with it really just the odd issue now and again. But for a few days now the phone just wont stay connected to the net to satisfy the Widgets & Email retrieval, when using facebook i will be give