I am using the DSGN CS4 CT now upgrade to DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5
I am using the DSGN CS4 CT now upgrade to box set DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5.5 s/n works but the old one CS4 s/n not work) Pls let me know the solution sooner.
So your CS4 serial number is not accepted when you try to enter it as a qualifying version?
Similar Messages
-
I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?
Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day. -
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
-
Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.
Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.
-
i have a pc and am using the trial version for now. I have readabout and seen on other computers, but no matter where i look or follow the dirrections i can not find the mini bridge what am i doing wrong. thank you
CC and CC2014 are the current versions of Photoshop. CC stands for Creative Cloud.
That being cleared up, a respectful request:
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
I have unlock my iphone to travel and I came home to use the back up and now my phone won't accept the back up
How & who unlocked your iPhone?
-
I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?
It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew -
I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks
If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.
-
Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y
restart installation and pick whatever options you want to install.
-
hi,
i wanted to resize my windows partition. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partition from the backup. Is this possible?I see youhave gotten recommendatons for using WinClone or CampTune. I have used both and they both work well.
You have asked about using the WIndows 7 utility to backup your drive and restor it onto a larger partition. I will tell you fro experience that this will probably not do what you want, and may do something that you don't want. You can use the Windows 7 native backup tool to make a backup of your Windows 7 partition. It will most liekly end-up making a dive image of the whole drive. When yourestore that backup, it will try to re-create teh partitions of exactly the same size as they were when the backup was taken, so it won't increase your partition size for you. Worse, since Windows doesn't natively know how to read./write HFS+ volumes, the backup will make a partition for your MacOS (replacing any you may have now), except that the copy restored by WIndows will be totally worthless, and you will not be able to boot MacOS from it, or even read it under MacOS.
Now I will tell you that I've also had some fairly good success working with the free tool CloneZilla. Since it hasn't been mentioned yet, and everything else mentioned does cost you money, I thought I would throw it out. CloneZilla is not as easy to use as the tools mentioned, but it has worked for me int hte past, so it is something to consider. I tend to use CampTune myself, but that was because I purchased a bundle deal for them and it was included in that deal. -
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
I am not able to see the scanner in photoshop.Are you using a mac or windows? And what version?
-
HT1218 What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?
What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?
Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody -
Remove CS4 after installing CS5
Hi...
Just bought CS5 Design Premium upgrade (from CS4). While waiting for CS5 to arrive, I downloaded the trial version of CS4. This did NOT overwrite CS4. When I receive CS5, I plan on just putting the serial number in the trial version. That will leave CS4 on my computer.
2 questions...
1. Can I delete CS4 (after installing CS5) using add/remove without messing up the CS5 installation?
2. If I remove the trial version and install CS5 when I receive it, will it automatically remove/overwrite CS4?
Thanks for your help...1. Yes, but there's no good reason to do so.
2. No, the trial is identical to purchased version. Just enter your serial number and you should be good to go.
Bob -
Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?
Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?
Sure. I have Flash 8, CS3,4,5 all installed and each will run.
-
My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.
HI've had the same issue and despite clearing the PRAM and powering on and off repeatedly this is what has (at least temporarily) resolved my issue:
I've done this 3 times and sometimes it works right off the jump other times I've had to wait a bit and try again or power off and try again, once the start up screen is frozen hit Command : Option : Shift : Esc and a window should pop up "You restarted because of a problem..." from there you can go to your desktop. I haven't found an actual resolution to fix the problem but this does get you into your computer.
Hope this helps!
Maybe you are looking for
-
How many computers can you install the micro soft Office 2011 on.
How many computers can you install the Micro Office 2011 on?
-
If I use thunderbolt out from the computer via HDMI into the TV. How can I get sound to the TV?
-
How to use Flagged mailbox in rules for smart mailbox?
Since I installted ML I have a new mailbox called Flagged. In Lion I had a smart mailbox called Flagged which did the same. I used this smart mailbox in Lion in rules of other smart mailboxes. The new mailbox Flagged in ML however can't be selected i
-
HELP! Slow logon with Cached Credentials off domain. Have xperf files.
Having issues when you take a corporate laptop off domain and log in using cached credentials. Login times range from 2-4 minutes. This is with SSD. No problem logging in on network. Only way to speed up login off network is disable wireless. I ran x
-
Ok, some of you may recall my issue with needing a CPUAPR2008 patch.... I downloaded that patch, executed it, and then last night that system died. Everything is back on line now, but NOW that patch is no longer available to download via metalink. It