I am using the latest version of Firefox, but keep getting message to upgrade as wesite will not open as it thinkgs I am using an old version
I constantly get messages that say I am not using the latest version of Firefox & then do not display properly. I am using v3.6.3 & get this message on a lot of sites I visit.
Just noticed that in the guesses shown below -even this thinks I am using v2.0 Firefox version, which is not correct.
== URL of affected sites ==
http://www.ebookers.com/shop/home
The megaupload extension is causing that behavior:
http://support.mozilla.com/en-US/forum/1/593040?#threadId593183
Similar Messages
-
I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
i want to install imovie 10.0 but keep getting message : your computers video card does not meet the minimum system requirements ? what should I do ?
There are some suggested solutions in this thread:
https://discussions.apple.com/message/23486450#23486450 -
There is no major problem other than I am concerned I am not on the latest version. I have downloaded firefox 6.0 (or whatever is the latest version) but when firefox starts there is a message under the start page which says I am not on the latest version. Is there something I am not doing?
Your UserAgent string in Firefox is messed up by another program that you installed. <br />
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox -
Every time I go on YouTube, it comes up with: 'adobe flash plugin has crashed'. I have tried refreshing and restarting my laptop, I have also got all the latest flash and Firefox, but it still won't work.
I'd start with disabling Hardware Acceleration, as described in the video troubleshooting guide below:
Video playback issues
If that solves the problem, make sure that your graphics drivers are current.
If it *still* happens with current drivers, please give us detailed information on the graphics card and driver, so that we can disable hardware acceleration on this configuration and start a conversation with the appropriate vendor.
The best way to get this information is to do the following (on Windows):
Open a command prompt
Type: dxdiag
Hit Enter
This should launch the DirectX Diagnostic Tool
Click Save All Information (or whatever that save button says).
Paste the contents into a reply here, or you can click Use Advanced Editor in the upper right of the reply window, and then attach the file using the link at the bottom right of the reply window. -
I have a 2008 mac, and am trying to use the latest iPhoto app. But it won't open. I have installed the library upgrade but still won't open?
Why not? We can not see you so you have to give us details
Did you run the iPhoto Library upgrader after you installed it - if not backup your iphoto library and go to the utilities folder in your Applications folder and double click on the iphoto library upgrader and RUN i - then launch iphoto 9.6 to complete the upgrade
LN -
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened
https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem. -
I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??
Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~ -
trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...
The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]] -
I've tried several times to use iTunes Match that I purchased but keep getting an error message half way through the process
sheltonrt wrote:
I've tried several times to use iTunes Match that I purchased but keep getting an error message half way through the process
That is strange, sheltonrt.
What kind of an error? -
Fire fox will not open, page says unable to connect. using 7.0.1
Fire fox will not open, page says unable to connect. using 7.0.1
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
my macbook is loaded with microsoft word for macs and every time I try and open the program I get an error reading and it will not open. This is what it says:
The application Microsof Word quit eunexpectedly. Powerpoint and the other applications still respond!The joys of Microsoft!
Maybe the preferences file is corrupted. You should be able to find the Word preferences file in the folder:
your user name/Library/Preferences
Its name is com.microsoft.Word.plist
I suggest you drag this another folder and try Word again.
If that doesn't work then you might find clearing the cache files will fix the problem. You can do this manually but I never bother. Instead I use a program like Snow Leopard Cache Cleaner (shareware) or Onyx (free). These programs do lots of other maintenance jobs so it's worth having at least one of them.
Bob -
Using windows 8 and trying to install photoshop cs6 but keep getting message to close cs5 bridge
using windows 8 and trying to install cs6 but keep getting message to close adobe bridge cs5 which I do not have open. Is this a bug in windows 8???
bridge.exe is probably running in the background. Trying closing it via the Task Manager.
See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html -
iTunes keeps giving me the message that my iPod is currupted. I have restored the iPod and reloaded iTunes but keep getting the same message. What's weird is that my iPod will connect to another PC and that my PC will connect to my daughter's iTouch. Any ideas? My iPod was working with my PC for years and just started getting this error.
According to this article: http://support.apple.com/kb/TS3694
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
B-rock
Maybe you are looking for
-
Change UI configuration dynamically when ever user selects a new value in a drop down field in WebUI
I enhanced the standard activity component (i.e BT126S_APPT ). In this component, in BT126S_APPT/ApptSQ view there is a field 'PROCESS_TYPE' which is a dropdown. I have created a server event for this dropdown. So that whenever user selects a value i
-
EEM interface errors not matching
I have the event applet configured below. I test by changing the controller time-slots to 1-15 instead of 1-24 in order to generate errors on my Serial0/1/0:0 interface. Errors are generated, but the eem applet does not match even though the errors
-
ADF app hangs when accessing through browser
Hello ADF/Weblogic friends, When I try to access the ADF app, it says loading... for ever, which was deployed successfully in WebLogic. I do not see any visible errors in the log. Verified the DB connection which was deployed is working. Also created
-
Ssl empty certificate chain?
I am having Problems with client certificate/setup. I have a client behind proxy that connect to Web Services. I have only a client certificate that I import (use keytool) in my keystore. I have this setting in my program: Security.addProvider(new co
-
Non PO Spend by Category report
Dear experts, I would like to clarify the following. We have 'Non PO Spend by Category' report in SPM 3.0. It compares the total spend vs spend without PO reference. My question is, since invoice which does not have PO reference cannot be linked to a