I am using the mac QQ and when I login it said login timeout.
I am using the mac QQ and when I login it said login timeout.
If you are missing using google maps - try the Nokia map app called "here"
Similar Messages
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i
If you are missing using google maps - try the Nokia map app called "here"
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."
If you are missing using google maps - try the Nokia map app called "here"
-
Is normal that appear a spot when i use the camera? and when you apply the zoom, the spot increases its size?
Morning alex navarro,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Hope this helps,
Mario -
Id been using my iphone 5 16g for fifteen days already and im experiencing overheat everytime im using the 3g internet and when im turning on my personal hotspot. the battery as well draind so fast. i thought this phone will make me satisfied but why?
My god what a bible up above ..
I just been thinking this might bee good replacement and ip 5 can stay live longer ?
http://www.ebay.co.uk/itm/360731576101?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1 423.l2649 -
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
-
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, RichIn order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.
-
I have a new keyboard and two of the keys are inverted when I use my Mac -- but not when they put that keyboard on the Mac at the Apple Store. The @ is where the < should be and visa-versa. That is, when I type the @ I get < and when I type the < I get @. I am in Français numérique. Thanks
Try a SMC reset, please do it 2-3 times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.) -
My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.
Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps. -
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
So, I bought the iPod shuffle and when I plug it into my mac, the option of syncing doesn't appear. What do I do?
Does the Shuffle appear ini Tunes at all? If not try using a different USB port and double checking to make sure the other end of the syncing cable is firmly seated in the Shuffle.
B-rock -
Is it possible to attach a bluetooth speaker to my mac and still use the mac's speakers at the same time, so I can have music in two rooms (from the mac in the lounge and the bluetooth speaker in the kitchen? It seems to be a choice of either/or as when I pair my speaker the sound stops from the mac's speakers.
No.
Maybe you are looking for
-
Test program in manufacturing environment
I'm designing a program to be used in a manufacturing facility. The ultimate goal is for a user to: 1) select a part number that has specific parameters to be verified (resistance, flow, leak), 2) tested several parts of the selected type and then 3
-
BTE 2040/2050 for payment program + requested send time
Hello, We activated BTE 2040 + 2050 in order to send payment advice by E mail. The business requirements are to send the E mails 3 days after the payment run is completed-documents is posed (sys datum + 3). In order to do that, we wrote an ABAP code
-
I use Oracle XE with APEX to develop an application and I would like to be able to get into this application both as a developer and as a simple user. I would like the developer to modify the application, when needed, using ''developer'' password, an
-
Value table not appearing..
Hi, I have created one ZTABLE and one of the field is GL a/c number and for that field I have used standard data element HKONT which is having domain SAKNR. For this domain value table is already assigned and that is SKA1. But I can't able to see F4
-
ESS and MSS objects translation and localization
Hello, we are implementing ESS on our ERP system and I have problem with translation of standard objects in ESS (pages, worksets, iviews). If I copy standard objects into new map, change default language on user to english, I can edit and rename obje