I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing

I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing?

Similar Messages

In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

Nevermind...
Fixe:
projects setting > switch Renderer.
Thanks

IE10 Windows7 - iTunes opens maybe 3 times and then it thinks i am a new user. I ge the license agreement again. Apple SR Techs cannot figure it out. Does this have to do with IE10?

Windows 7 - installed IE10. Now every few times iTunes is opened I get the 'user license' agreement as if i am a new user. Apple SR techs have been working with me for weeks and have NOT solved this problem. i have a iPhone 4S, but this happens before I even plug in. Can you help? Also, second question:
Also, I have two apple accounts (mistake) and apple says that they cannot delete the invalid one! When I finally can get on iTunes it asks if I want to merge or replace - I am told to do neither (i am syncing by plugging in the 4S to my computer - i have Outlook). SO... right now i am unable to sync. SR Tech says having the 2 accounts is not the problem - actually - 2 techs said it was and 1 says it is not. SO frustrating! Is there a way to resolve this?
Thanks - CJ Texas

McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
Not so sure about the suplemental question, but see Recover your iTunes library from your iPod or iOS device for tips to make sure you don't lose content from the device.
tt2

My ipod 5th generation wont charge after ios 8 update .. does this have something to with the charger not being an apple product?

Before the update my iPod was charging fine. then when I updated it started acting funny like one minute it would charge then it wouldn't then the next after IOS 8 came out my iPod wouldn't charge at all. could it be that my charger isn't an apple product? PLEASE HELP!!! I have important notes from school on here and I'm afraid to ask my mother for a new one without giving her a good explanation.

Could be that the update make the iPod more aware of marginal cable. Other users have reported the same.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Using the Pen Tool As a Guide?

Is there a way to use the Freedom Pen Tool as a guide? I used the 'Auto Blend Layers' and there a few misalignments. So I am using the Freedom Pen Tool to outline where the blend was made. After I correct the misalignments, I want to get rid of the Pen Tool outline. I tried putting the pen tool on its own layer but when I deleted the layer, the pen tool marking was still there. Is there any way to get rid of the pen marking after fixing the misalignments?
Thanks,
Lou

loudiamond wrote:
Is there any way to get rid of the pen marking after fixing the misalignments?
Delete it from the Paths panel.

How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
http://adobe.ly/STegFg

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

I used the pen tool constantly in photoshop cs6 and would often use control + left click to select a different shape while still using the pen tool.
I'm now forced to switch to the move tool to select another layer? Why was this feature removed / changed?
Fix: After fooling around more, here is how I fixed it:
The new Direct Select Tool by default is set to "active" layers. Switch it to "all layers"
Message was edited by: Joe Horan

A new problem = Selecting multiple points with control + click + drag is selecting ALL shape layers... Jesus christ, why was this changed????
I now have to double click the shape I want to select? Why? What is the point of this?

What happened to the 'Shape Mode' shortcut keys on the Pen Tool?

For the longest time I've used both the Shape and Pen Tools for drawing vectors in Photoshop, but with CS6 I noticed a lot of weird behaviours. The one that is really getting to me is the lack of 'Shape Mode' shortcut keys when using the Pen Tool. When on the 'Shape Tool', fo example Cirle or Rectange, you can press the Shift to change the Shape Mode to 'Add', Alt to change it to 'Subtract' or both together to get 'Intersect'. This functionality used to exist on the Pen Tool too, but in CS6 I can't seem to get it working.
A collegue suggested to move over to Illustrator for all my Vector needs, and I know that this a good advice. However the lack of quick/integrated changing between 'Shape Modes' in either product (now) makes drawing things alot slower (for me).
Am I missing something, or is this feature now ommited in Photoshop CS6. If it is does anyone know if its possible to script something to allow this kind of behviour in Photoshop or Illustrator?
cheers,
Jon

The modifier keys "Alt|Opt", "Ctrl|Cmd" and "Shift" work differently depending on the tool being used but the individual keys seem to provide somewhat related functions.
For example the "Shift" key tends to be a constraining key Rectangle tools are constrained to square ellipse tools to Circles. However if there is an Active selection when you hold down the skey when you drag out a new selection it does not reset the current selection instead the new selection is not constrained and is added to the current selection. Shift constrains Transform tool to current aspect ratio, Shift constrains Line tools to vertical, horizontal or 45 degree angles. Pen tool like line tool shift constrains the angle.
The "Alt|Opt" key changes the way tools operate. Transforms are from the center not from the side or corner being dragged. Selection tools like the rectangle and ellipse will cause the intal drag out be from the center however it there is a Active selection dragging out a new selection will be subtracted from the current selection. This key changes the Pen tool from draw mode to anchor point adjusting.
The "Shift" and "Alt|Opt" modifier keys can be used together to have an operation be both constrain and from the center.
The "Ctrl|Cmd" key seems to change the way a tool works on a control anchor point. The Pen Tool changes from Pen Draw mode to Direct Selection tool to facilitate moving the point. Transform can be distorted a single corner point can be moved and distort the rectangle bounding box.
These keys may have other functions I don't know about. Photoshop has many features so many I don't know if any one person know and uses all of them. For the rest of us they seem to be Photoshop hidden secrets.

True or False about the pen tool in Photoshop?

Since Photoshop is mostly a raster image program,
and the Pen Tool is better for vector drawing in vector programs,
the Pen Tool is virtually useless in Photoshop, even if you want to
outline and mask something.
I always thought it was easier to use the paintbrush.
The pen tool in Photoshop is just silly.

Buko:
Don't be silly. I use the pen tool all the time (for cutouts, as a tool, text on path, you name it). Read post 17 -- 75 hours a week for four months cutting paths. Only cutting paths. A client that wanted the path between the dark and light pixels in the USM halo. The psychological damage is probably starting to surface now.
I understand how paths can be useful. I also wonder if their usefulness might have run its course. The reason I used paths 10 year ago was that I **had** to use paths. Don't you use them less for your mag now than you used to? Aren't you a big proponent of PSD outlines? In my workflow I find less and less of a need for them. But I make Medicaid brochures. It would be great to hear from some folks who use vector masks and need them for x reason.
I'm having trouble visualizing x.
J

Creating a bell-shapped (Gaussian) curve with the Pen Tool

Hello everyone,
I'm trying to create a bell-shaped (Gaussian) curve in Photoshop CS3, using the Pen Tool, however apparently I am not good enough with it... I can create a curve that resembles a simple parabola - like this one http://4.bp.blogspot.com/_BhBX8ycVeL4/SIHhJYmDCgI/AAAAAAAAA-g/2Dc_Tf1Kz5c/s400/400px-Para bola.svg.png only upside-down; however I can't figure out how to further go from here in order to add the extra inflexions on the sides that make the parabola into a Gaussian curve, that would look something like this: http://naturalcureinsomnia.com/img/Bell-Curve.gif
Can anyone help? Thanks in advance!

Art,
Correct me if I'm wrong---I believe you want a schematic Gaussian curve rather than a mathematically precise one.
If so, set up two horizontal guide lines, one running through the desired apex and the other through the curve's baseline. Add three vertical guides, one through the apex and the other two equally spaced on the left and right sides of the guide through the apex.
Let point A be at the intersection of the left vertical with the baseline, point B be the apex, and point C be the intersection of the right vertical with the baseline.
With the pen tool at point A, drag horizontally to the right a fraction of the distance to the central guide. Release the mouse, move the pen tool to point B and drag horizontally to the right about the same distance or until the left half of the curve looks Gaussian. Release the mouse, place the pen tool at point C and drag horizontally rightward until the right half of the Gaussian curve matches the left.
To close the curve, release the mouse and click at a point on the baseline well beyond point C, connect from below with a path of any shape to a point on the baseline well to the left of point A, and then close to point A. Stroke the path, delete the path, and erase all but the Gaussian part.
Experiment with the ABC positions and the drag lengths until you get a decent curve. Should you want a precise curve it would be better to use one of the freeware curve programs out there. But if you want a bit of precision with the pen tool, that's possible by calculating one or two intermediate points between A and B and symmetrically between B and C and then dragging the pen so that curve comes reasonably close to passing through them.

There are no shape tools showing up when I apply the fast blur effect.

How do I fix this or work around?

Hi amhodrick,
Do you mean the oval and square shape tools when you select the clip and view the Effects panel?
When did you last update your copy of Premiere Pro? I think those two shape tools are new to the June 2014 release of Premiere Pro. The Pen tool shown in my screen shot is new to the October 2014 release. (Remember that updating your CC software does not overwrite your installed version. Check your Applications folder and you'll probably see the newer installation next to the older one, and your task bar shortcut icons may still be pointing to the older versions.)
HTH,
Stefan

Help with using the pen tool

I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.
If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
Thanks.

Ok, the first example would be something like this. Pretending the lines go elsewhere, say I've drawn a path with the pen tool, gone round the bottom box and that then goes round the two lines going down. So if I go down the one on the left side it hits the previous path I did, but to go up the line on the right side I'd need to go across there. But if I make a point where the two lines meet to do this it then throws the line off elsewhere.
I did have snap vector tools on but it does that without it on.
The next one I was creating a car speedometer so it has lines on the outside, dots inside of that and then, where I've done the blue circle, would be the third path where I then write the numbers in. But I can never write on that third path.
And finally, the pen tool and I think it dd have Shape Dynamics set. I've changed a couple of things and it looks a bit better now so I think that should be ok. Thanks
I know I haven't shown the panels but I haven't got any for the first as it won't go right so I deleted what I was doing. And each thing I've done is on a different layer for the speedometer, all just paths created with the circle tool with the text on.

Using the Pen Tool in Flash

I'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
If you have any suggestions as to why this may be, I would be greatly appreciative.
Chris

Thanks Ned,
I think I worked out the problem; I think that part of the instruction was missing. When I looked at the picture again, I noticed that there were anchor points around the stage, so I guess that was what I missed. I was simply creating the wavy line across the stage, and then clicking on the first anchor point to close the shape. I resolved the problem by creating three anchor points around the stage and then closing the image by clicking on the first anchor.
Thanks again for your help Ned.
Chris

Photoshop CS4 Crash Using the Pen Tool

We have experienced an issue where creating a line/path using the Pen tool in Photoshop CS4 caused a system-wide freeze, regardless of operating system, other software installed, etc....
Not even a kernal panic, but just a complete freeze.
We found that it only occurred on our white, 24-inch iMacs (2.16 Ghz Intel Core 2 Duo). I tried it on 5 different white iMacs, with various builds of Tiger or Leopard, and they all froze up completely.
We had a plain 10.5.8 image on one of the white iMacs, with nothing extra except Photoshop CS4, and it froze up completely using the Pen Tool on a new document as well.
Oddly enough, the workaround was having Photoshop CS4 run using Rosetta, and then the Pen Tool works fine. It is odd considering the iMacs have Intel processors, and not PowerPC that would need Rosetta.
I have not found anyone else with hardware specific issues like this. So, I thought i should share our (hopefully) temporary workaround.

A complete system freeze means a kernel or driver level bug, or a hardware problem.
Rosetta won't process as fast - meaning that the processor is less taxed, and it may call the drivers differently.
Upgrading to MacOS 10.6 might avoid driver problems (that were in 10.5), but hardware issues would remain.
But first you might try disabling OpenGL drawing in preferences (avoiding the most problematic drivers, and reducing the load in the graphics hardware).

After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
My specs:
iMac
21.5-inch, Mid 2010
Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Graphics ATI Radeon HD 4670 256 MB
Software OS X 10.8.2 (12C60)
Anybody else having this problem or have a solution?

So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing

Similar Messages

Maybe you are looking for