I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

Similar Messages

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

The iPhoto library should be in your user folder/Pictures unless it was moved.

I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

Exactly WHAT did you import?
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Hi Folks, I am using FCPX 10.0.8 on a MPB 10.8.2 with a multi in/out audio device RME Fireface 400. I recorded a timecode track through in 11 and routed it to out 3. Initially it worked, although it did also play timecode through the main outputs 1

Hi Folks,
I am using FCPX 10.0.8 on a MPB 10.8.2 with a multi in/out audio device RME Fireface 400.
I recorded a timecode track through in 11 and routed it to out 3.
Initially it worked, although it did also play timecode through the main outputs 1&2 !!!
Now it has stopped playing TC through output 3.
Is FCPX capable of working with professional audio?
Regards
Donagh Long.

You welcome

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

Just received a voicemail and I am unable to play it back, the play arrow is fray

just received a voicemail and i am unable to play it back, the play arrow is gray

Did you get any answers?

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font doe

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font does not change. It's the same in Dreamweaver's Live view. It shows the new color on Desktop view and not in the cell phone or tablet view. Also, I changed the font itself in one of the DIVs and it shows up in the new font on the desktop view and website viewed thru the computer, but, not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for viewing in the tablet and cell phone, also. The fonts were all standard fonts. Sans-erif and Verdana and Arial were tried. Thanks.

I will lock this discussion because of duplicate post.

I have a new air iPad, just downloaded a new movie and now I can't play it as it his and all my other movies have a cloud icon, how do I get to play it on the iPad

I have a new air iPad, just downloaded a new movie and now I can't play it as it his and all my other movies have a cloud icon, how do I get to play it on the iPad

Tamate46 wrote:
now I can't play it as it his
Not sure what you mean by this. Why can't you play it?

To add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC

Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB

4Buck5 wrote:
Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB
I am not 100% what isn't allowed.. but I am assuming you want to spread the backup across the two disks.. internal TC and 6TB external.. this is not possible.. It has to be one or the other. TC has no way to build a raid JBOD or anything else. Nor would you want to as that is the most likely to fail and kill your data.
Let me add, backing up 6TB over USB on TC.. will be the most excruciating experience of your life.. cf child birth or passing kidney stones.. large ones.. being the male equivalent.

How to prevent the Canon 6D to climb to higher ISOs when it works in automatic mode?

How to prevent the canon from 6D climbing to higher ISOs when it works in automatic mode?
I was shooting at a basketball game at ground level and I left it in automatic mode because the moves were too fast, but when I passed to Lightroom, the photos were grainy, due to high ISO.

Under the settings menu (third menu over), select ISO settings, and then set the Auto ISO limits for max to whatever you consider the maximum acceptable ISO.

Upgraded to 10.3.1 - photos appear blurry in the albumn but are fine when viewed on a computer

Hi - I upgraded to 10.3.1 on my Q5 last week. When I take a photo it takes a while to appear and then looks blurry. If I turn the phone off and try again it's fine for a little while then the same problem happens. I downloaded the photos to my computer to double check them and they are clear on the computer, so it's not an issue with the camera as I first thought, but rather when viewing them. I have no outstanding updates and I have searched all over the forums but can't see a solution. Thanks in advance for any help.

can you please take one picture, view it when it is blurred and make a screenshot
and do the same after turning the phone off ?
then for both screenshots, you can attach them here so we can see.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Shots come back to FCP looking blurry (and shifted!)

Here's the deal:
DVCPRO HD 720p60 footage sent to COLOR (from FCP). Minor adjustments made (color grading in a basic mask shape, NOT using the geometry room). I am NOT reframing anything. I render using the original clip settings. I also tried 12 bit, 16 bit, and floating bits.
When shots come back to FCP, they look blurred. Something like a 1-2 pixel blur. Also, the shots are displaced by 1 or 2 pixels upwards, and to the left. The "shift", I can live with. The blur, I cannot.
I read a lot of messages on this board, but nothing helps so far.
Any tips???
Thanks!

1248x702 -- not a typo?
DVC Pro is an anamorphic format and the native aspect ratio is 4x3. Quicktime is fixing this because it recognizes the codec and can deal with the non-square intended/implied aspect ratio.
COLOR doesn't deal with this at all, and will send back whatever you submit as if it were square.
FCP is trying to fit the new square footage into the codec's "round hole". The blur and shift are obvious in your resolution settings ... 702 is going to shift the image 18 pixels. and 1248 should be 1280.
You get the real truth, and not some interpretation of it, when you navigate to the original media through COLOR's browser. You'll probably find another set of interesting numbers if you do that.
Even codecs that you thought were one thing are being masked sometimes by Quicktime and FCP. The AJA 10-bitRGB codec is a good example of mis-reporting under the various applications.
I expect you are getting either a red or green RTE line on the FCP sequence?
jPo

Every 8 days when in sleep mode my fan runs up to high speed. Have to shut down to stop it. Tried SMC reset no use. Even powered down for a day when speed up was due, 8 days later ran up to high speed when asleep. How do I fix this

I was previous running Lion but upgraded a week ago the Mavericks but the fault it still there. Nearly always happens in middle of the night as when I get up in the morning fan is running at high speed.

Try the troubleshooting steps using the Test Account. The theory is if the Test Account works OK then you know you have an issue with your standard user account. If the problem persists with the Test Account then you know it's a global issue and can begin eliminating items. I would start by eliminating non essential peripherals such as printers, time machine etc. You may find you have a problem with one of those or some app or some setting.

Is anybody out there using iMovie/iDvd to create Dvds from a digital camera

In a post yesterday I already described the problems I have with iLife.
But problems can be solved. My question is : Is anybody using iLife
to burn a dvd from the tape of a digi cam with titel and chapter markers
or is that not possible. No long descriptions necessary.

Yes. I'm stringing video clips from my digital camera together, with titles, to make into a chaptered DVD.
It's not going well. iDVD08 doesn't recognize the titles I put in in iMovie08. iMovie08 won't allow me to place chapter markers (that I've found--if there's a way, please correct me!), and won't allow me to export short movies any higher than Mobile resolution, even though it's made from the same clips as the 2 hour that did export at Large resolution. Are you having these problems as well? Where is your other post (I'm new to the forum)?
Thanks.

HT1349 When I download music (from both Itunes and my own c.d.'s) and then play them back, the volume is different on some songs. Is there some way to regulate the volume so that it is the same for all?

Can anyone help me with the above question? I like to make up cd's of all time favorite songs, but the volume changes too much. Is there anything I can do in order to get even sound? Thanks.

That's what iTunes -> Preferences -> Playback -> Sound Check does - equalizes the volume across tracks to provide a more-even playback.

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

Similar Messages

Maybe you are looking for